mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
558d86923e
EnGenius ENS202EXT is an outdoor wireless access point with
2-port 10/100 switch, detachable antennas and proprietery PoE.
The device is based on Qualcomm/Atheros AR9341 v1.
Specifications:
- 535/400/200 MHz (CPU/DDR/AHB)
- 64 MB of RAM
- 16 MB of FLASH
- UART (J1) header on PCB (unpopulated)
- 2x 10/100 Mbps Ethernet
- 2.4 GHz, up to 26dBm
- 2x external, detachable antennas
- 7x LED, 1x button
Flash instructions:
You have three options:
- Use the vendor firmware upgrade page on the web interface and give
it the factory.img. This is the easiest way to go about it.
- If you have serial access during u-boot, interrupt the normal boot
(any key before timeout) and run 'run failsafe_boot'; this will bring
you to a minimal openwrt luci image on ip 192.168.1.1 useful if you've
bricked the normal firmware.
- Use the vendor's management cli, which can be accessed via telnet
with the same credentials as the web login (default admin:admin), then
issue the following commands:
*** Hi admin, welcome to use cli(V-1.6.7) ***
---========= Commands Help =========---
stat -- Status
sys -- System
wless2 -- 2.4G-Wireless
mgmt -- Management
tree -- Tree
help -- Help
reboot -- Reboot
ens202ext>mgmt
Management
---========= Commands Help =========---
admin -- Administration
mvlan -- Management VLAN settings
snmp -- SNMP settings
backup -- Backup/Restore settings
autorb -- Auto reboot settings
fwgrade -- Firmware upgrade
time -- Time settings
wifisch -- Wifi schedule
log -- Log
diag -- Diagnostics
disc -- Device Discovery
logout -- Logout
help -- Help
exit -- Exit
ens202ext/mgmt>fwgrade
Management --> Firmware upgrade
---========= Commands Help =========---
fwup -- Firmware upgrade
help -- Help
exit -- Exit
ens202ext/mgmt/fwgrade>fwup http://web.server/lede-ar71xx-generic-ens202ext-squashfs-factory.bin
Signed-off-by: Marty Plummer <ntzrmtthihu777@gmail.com>
125 lines
3.4 KiB
C
125 lines
3.4 KiB
C
/*
|
|
* EnGenius ENS202EXT board support
|
|
*
|
|
* Copyright (C) 2017 Marty Plummer <netz.kernel@gmail.com>
|
|
*
|
|
* This program is free software; you can redistribute it and/or modify it
|
|
* under the terms of the GNU General Public License version 2 as published
|
|
* by the Free Software Foundation.
|
|
*/
|
|
|
|
#include <linux/gpio.h>
|
|
#include <linux/mtd/mtd.h>
|
|
#include <linux/mtd/partitions.h>
|
|
#include <linux/platform_device.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
#include <asm/mach-ath79/ath79.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
#include "nvram.h"
|
|
|
|
#define ENS202_GPIO_LED_WLAN4 0
|
|
#define ENS202_GPIO_LED_POWER 14
|
|
#define ENS202_GPIO_LED_WLAN2 16
|
|
#define ENS202_GPIO_LED_WLAN3 17
|
|
#define ENS202_GPIO_LED_WLAN1 18
|
|
|
|
#define ENS202_GPIO_BTN_RESET 1
|
|
|
|
#define ENS202_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define ENS202_KEYS_DEBOUNCE_INTERVAL (3 * ENS202_KEYS_POLL_INTERVAL)
|
|
|
|
static struct gpio_led ens202_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "engenius:amber:wlan1",
|
|
.gpio = ENS202_GPIO_LED_WLAN1,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "engenius:red:wlan2",
|
|
.gpio = ENS202_GPIO_LED_WLAN2,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "engenius:amber:wlan3",
|
|
.gpio = ENS202_GPIO_LED_WLAN3,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "engenius:green:wlan4",
|
|
.gpio = ENS202_GPIO_LED_WLAN4,
|
|
.active_low = 1,
|
|
}, {
|
|
.name = "engenius:amber:power",
|
|
.gpio = ENS202_GPIO_LED_POWER,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button ens202_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "reset",
|
|
.type = EV_KEY,
|
|
.code = KEY_RESTART,
|
|
.debounce_interval = ENS202_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = ENS202_GPIO_BTN_RESET,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static void __init ens202_setup(void)
|
|
{
|
|
const char *nvram = (char *) KSEG1ADDR(0x1f040000);
|
|
u8 mac_buff[6];
|
|
u8 *mac = NULL;
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
if (ath79_nvram_parse_mac_addr(nvram, 0x10000,
|
|
"ethaddr=", mac_buff) == 0) {
|
|
ath79_init_mac(ath79_eth0_data.mac_addr, mac_buff, 0);
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, mac_buff, 1);
|
|
mac = mac_buff;
|
|
}
|
|
|
|
ath79_gpio_function_enable(AR934X_GPIO_FUNC_JTAG_DISABLE);
|
|
|
|
ath79_gpio_output_select(ENS202_GPIO_LED_POWER, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN1, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN2, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN3, AR934X_GPIO_OUT_GPIO);
|
|
ath79_gpio_output_select(ENS202_GPIO_LED_WLAN4, AR934X_GPIO_OUT_GPIO);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ens202_leds_gpio),
|
|
ens202_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, ENS202_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(ens202_gpio_keys),
|
|
ens202_gpio_keys);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_wmac(art + 0x1000, NULL);
|
|
|
|
ath79_register_mdio(1, 0);
|
|
|
|
ath79_setup_ar934x_eth_cfg(AR934X_ETH_CFG_RGMII_GMAC0 |
|
|
AR934X_ETH_CFG_SW_ONLY_MODE);
|
|
ath79_eth0_data.phy_if_mode = PHY_INTERFACE_MODE_MII;
|
|
ath79_eth0_data.phy_mask = BIT(0);
|
|
ath79_eth0_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
ath79_eth0_pll_data.pll_1000 = 0x06000000;
|
|
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_GMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
|
|
ath79_register_eth(0);
|
|
ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_ENS202EXT, "ENS202EXT", "EnGenius ENS202EXT",
|
|
ens202_setup);
|