ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-20 14:13:16 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
0fc3a4aa10
openwrt/target/linux/ipq807x/patches-5.15/0900-power-Add-Qualcomm-APM.patch
Robert Marko b5f32064ed ipq807x: add Qualcomm Atheros IPQ807x target 
Qualcomm Atheros IPQ807x is a modern WiSoC featuring:
* Quad Core ARMv8 Cortex A-53
	* @ 2.2 GHz (IPQ8072A/4A/6A/8A) Codename Hawkeye
	* @ 1.4 GHz (IPQ8070A/1A) Codename Acorn
* Dual Band simultaneaous IEEE 802.11ax
	* 5G: 8x8/80 or 4x4/160MHz (IPQ8074A/8A)
	* 5G: 4x4/80 or 2x2/160MHz (IPQ8071A/2A/6A)
	* 5G: 2x2/80MHz (IPQ8070A)
	* 2G: 4x4/40MHz (IPQ8072A/4A/6A/8A)
	* 2G: 2x2/40MHz (IPQ8070A/1A)
* 1x PSGMII via QCA8072/5 (Max 5x 1GbE ports)
* 2x SGMII/USXGMII (1/2.5/5/10 GbE) on Hawkeye
* 2x SGMII/USXGMII (1/2.5/5 GbE) on Acorn
* DDR3L/4 32/16 bit up to 2400MT/s
* SDIO 3.0/SD card 3.0/eMMC 5.1
* Dual USB 3.0
* One PCIe Gen2.1 and one PCIe Gen3.0 port (Single lane)
* Parallel NAND (ONFI)/LCD
* 6x QUP BLSP SPI/I2C/UART
* I2S, PCM, and TDMA
* HW PWM
* 1.8V configurable GPIO
* Companion PMP8074 PMIC via SPMI (GPIOS, RTC etc)

Note that only v2 SOC models aka the ones ending with A suffix are
supported, v1 models do not comply to the final 802.11ax and have
lower clocks, lack the Gen3 PCIe etc.

SoC itself has two UBI32 cores for the NSS offloading system, however
currently no offloading is supported.

Signed-off-by: Robert Marko <robimarko@gmail.com>
2023-01-16 12:42:23 +01:00

1048 lines
29 KiB
Diff
Raw Blame History

From 6c98adf98236b8644b8f5e1aa7af9f1a88ea2766 Mon Sep 17 00:00:00 2001
From: Robert Marko <robimarko@gmail.com>
Date: Mon, 11 Apr 2022 14:38:08 +0200
Subject: [PATCH] power: Add Qualcomm APM
Add Qualcomm APM driver, which allows scaling cache and memory fabrics.
Signed-off-by: Robert Marko <robimarko@gmail.com>
---
drivers/power/Kconfig | 1 +
drivers/power/Makefile | 1 +
drivers/power/qcom/Kconfig | 7 +
drivers/power/qcom/Makefile | 1 +
drivers/power/qcom/apm.c | 944 +++++++++++++++++++++++++++++++++
include/linux/power/qcom/apm.h | 48 ++
6 files changed, 1002 insertions(+)
create mode 100644 drivers/power/qcom/Kconfig
create mode 100644 drivers/power/qcom/Makefile
create mode 100644 drivers/power/qcom/apm.c
create mode 100644 include/linux/power/qcom/apm.h
--- a/drivers/power/Kconfig
+++ b/drivers/power/Kconfig
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
source "drivers/power/reset/Kconfig"
source "drivers/power/supply/Kconfig"
+source "drivers/power/qcom/Kconfig"
--- a/drivers/power/Makefile
+++ b/drivers/power/Makefile
@@ -1,3 +1,4 @@
# SPDX-License-Identifier: GPL-2.0-only
obj-$(CONFIG_POWER_RESET) += reset/
obj-$(CONFIG_POWER_SUPPLY) += supply/
+obj-$(CONFIG_QCOM_APM) += qcom/
--- /dev/null
+++ b/drivers/power/qcom/Kconfig
@@ -0,0 +1,7 @@
+config QCOM_APM
+ bool "Qualcomm Technologies Inc platform specific APM driver"
+ help
+ Platform specific driver to manage the power source of
+ memory arrays. Interfaces with regulator drivers to ensure
+ SRAM Vmin requirements are met across different performance
+ levels.
--- /dev/null
+++ b/drivers/power/qcom/Makefile
@@ -0,0 +1 @@
+obj-$(CONFIG_QCOM_APM) += apm.o
--- /dev/null
+++ b/drivers/power/qcom/apm.c
@@ -0,0 +1,944 @@
+/*
+ * Copyright (c) 2015-2016, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#define pr_fmt(fmt) "%s: " fmt, __func__
+
+#include <linux/debugfs.h>
+#include <linux/delay.h>
+#include <linux/of_device.h>
+#include <linux/init.h>
+#include <linux/io.h>
+#include <linux/kernel.h>
+#include <linux/list.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/platform_device.h>
+#include <linux/slab.h>
+#include <linux/string.h>
+#include <linux/power/qcom/apm.h>
+
+/*
+ * VDD_APCC
+ * =============================================================
+ * | VDD_MX | |
+ * | ==========================|============= |
+ * ___|___ ___|___ ___|___ ___|___ ___|___ ___|___
+ * | | | | | | | | | | | |
+ * | APCC | | MX HS | | MX HS | | APCC | | MX HS | | APCC |
+ * | HS | | | | | | HS | | | | HS |
+ * |_______| |_______| |_______| |_______| |_______| |_______|
+ * |_________| |_________| |__________|
+ * | | |
+ * ______|_____ ______|_____ _______|_____
+ * | | | | | |
+ * | | | | | |
+ * | CPU MEM | | L2 MEM | | L3 MEM |
+ * | Arrays | | Arrays | | Arrays |
+ * | | | | | |
+ * |____________| |____________| |_____________|
+ *
+ */
+
+/* Register value definitions */
+#define APCS_GFMUXA_SEL_VAL 0x13
+#define APCS_GFMUXA_DESEL_VAL 0x03
+#define MSM_APM_MX_MODE_VAL 0x00
+#define MSM_APM_APCC_MODE_VAL 0x10
+#define MSM_APM_MX_DONE_VAL 0x00
+#define MSM_APM_APCC_DONE_VAL 0x03
+#define MSM_APM_OVERRIDE_SEL_VAL 0xb0
+#define MSM_APM_SEC_CLK_SEL_VAL 0x30
+#define SPM_EVENT_SET_VAL 0x01
+#define SPM_EVENT_CLEAR_VAL 0x00
+
+/* Register bit mask definitions */
+#define MSM_APM_CTL_STS_MASK 0x0f
+
+/* Register offset definitions */
+#define APCC_APM_MODE 0x00000098
+#define APCC_APM_CTL_STS 0x000000a8
+#define APCS_SPARE 0x00000068
+#define APCS_VERSION 0x00000fd0
+
+#define HMSS_VERSION_1P2 0x10020000
+
+#define MSM_APM_SWITCH_TIMEOUT_US 10
+#define SPM_WAKEUP_DELAY_US 2
+#define SPM_EVENT_NUM 6
+
+#define MSM_APM_DRIVER_NAME "qcom,msm-apm"
+
+enum {
+ MSM8996_ID,
+ MSM8953_ID,
+ IPQ807x_ID,
+};
+
+struct msm_apm_ctrl_dev {
+ struct list_head list;
+ struct device *dev;
+ enum msm_apm_supply supply;
+ spinlock_t lock;
+ void __iomem *reg_base;
+ void __iomem *apcs_csr_base;
+ void __iomem **apcs_spm_events_addr;
+ void __iomem *apc0_pll_ctl_addr;
+ void __iomem *apc1_pll_ctl_addr;
+ u32 version;
+ struct dentry *debugfs;
+ u32 msm_id;
+};
+
+#if defined(CONFIG_DEBUG_FS)
+static struct dentry *apm_debugfs_base;
+#endif
+
+static DEFINE_MUTEX(apm_ctrl_list_mutex);
+static LIST_HEAD(apm_ctrl_list);
+
+/*
+ * Get the resources associated with the APM controller from device tree
+ * and remap all I/O addresses that are relevant to this HW revision.
+ */
+static int msm_apm_ctrl_devm_ioremap(struct platform_device *pdev,
+ struct msm_apm_ctrl_dev *ctrl)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ static const char *res_name[SPM_EVENT_NUM] = {
+ "apc0-l2-spm",
+ "apc1-l2-spm",
+ "apc0-cpu0-spm",
+ "apc0-cpu1-spm",
+ "apc1-cpu0-spm",
+ "apc1-cpu1-spm"
+ };
+ int i, ret = 0;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb");
+ if (!res) {
+ dev_err(dev, "Missing PM APCC Global register physical address");
+ return -EINVAL;
+ }
+ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!ctrl->reg_base) {
+ dev_err(dev, "Failed to map PM APCC Global registers\n");
+ return -ENOMEM;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "apcs-csr");
+ if (!res) {
+ dev_err(dev, "Missing APCS CSR physical base address");
+ return -EINVAL;
+ }
+ ctrl->apcs_csr_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!ctrl->apcs_csr_base) {
+ dev_err(dev, "Failed to map APCS CSR registers\n");
+ return -ENOMEM;
+ }
+
+ ctrl->version = readl_relaxed(ctrl->apcs_csr_base + APCS_VERSION);
+
+ if (ctrl->version >= HMSS_VERSION_1P2)
+ return ret;
+
+ ctrl->apcs_spm_events_addr = devm_kzalloc(&pdev->dev,
+ SPM_EVENT_NUM
+ * sizeof(void __iomem *),
+ GFP_KERNEL);
+ if (!ctrl->apcs_spm_events_addr) {
+ dev_err(dev, "Failed to allocate memory for APCS SPM event registers\n");
+ return -ENOMEM;
+ }
+
+ for (i = 0; i < SPM_EVENT_NUM; i++) {
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ res_name[i]);
+ if (!res) {
+ dev_err(dev, "Missing address for %s\n", res_name[i]);
+ ret = -EINVAL;
+ goto free_events;
+ }
+
+ ctrl->apcs_spm_events_addr[i] = devm_ioremap(dev, res->start,
+ resource_size(res));
+ if (!ctrl->apcs_spm_events_addr[i]) {
+ dev_err(dev, "Failed to map %s\n", res_name[i]);
+ ret = -ENOMEM;
+ goto free_events;
+ }
+
+ dev_dbg(dev, "%s event phys: %pa virt:0x%p\n", res_name[i],
+ &res->start, ctrl->apcs_spm_events_addr[i]);
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "apc0-pll-ctl");
+ if (!res) {
+ dev_err(dev, "Missing APC0 PLL CTL physical address\n");
+ ret = -EINVAL;
+ goto free_events;
+ }
+
+ ctrl->apc0_pll_ctl_addr = devm_ioremap(dev,
+ res->start,
+ resource_size(res));
+ if (!ctrl->apc0_pll_ctl_addr) {
+ dev_err(dev, "Failed to map APC0 PLL CTL register\n");
+ ret = -ENOMEM;
+ goto free_events;
+ }
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM,
+ "apc1-pll-ctl");
+ if (!res) {
+ dev_err(dev, "Missing APC1 PLL CTL physical address\n");
+ ret = -EINVAL;
+ goto free_events;
+ }
+
+ ctrl->apc1_pll_ctl_addr = devm_ioremap(dev,
+ res->start,
+ resource_size(res));
+ if (!ctrl->apc1_pll_ctl_addr) {
+ dev_err(dev, "Failed to map APC1 PLL CTL register\n");
+ ret = -ENOMEM;
+ goto free_events;
+ }
+
+ return ret;
+
+free_events:
+ devm_kfree(dev, ctrl->apcs_spm_events_addr);
+ return ret;
+}
+
+/* 8953 register offset definition */
+#define MSM8953_APM_DLY_CNTR 0x2ac
+
+/* Register field shift definitions */
+#define APM_CTL_SEL_SWITCH_DLY_SHIFT 0
+#define APM_CTL_RESUME_CLK_DLY_SHIFT 8
+#define APM_CTL_HALT_CLK_DLY_SHIFT 16
+#define APM_CTL_POST_HALT_DLY_SHIFT 24
+
+/* Register field mask definitions */
+#define APM_CTL_SEL_SWITCH_DLY_MASK GENMASK(7, 0)
+#define APM_CTL_RESUME_CLK_DLY_MASK GENMASK(15, 8)
+#define APM_CTL_HALT_CLK_DLY_MASK GENMASK(23, 16)
+#define APM_CTL_POST_HALT_DLY_MASK GENMASK(31, 24)
+
+/*
+ * Get the resources associated with the msm8953 APM controller from
+ * device tree, remap all I/O addresses, and program the initial
+ * register configuration required for the 8953 APM controller device.
+ */
+static int msm8953_apm_ctrl_init(struct platform_device *pdev,
+ struct msm_apm_ctrl_dev *ctrl)
+{
+ struct device *dev = &pdev->dev;
+ struct resource *res;
+ u32 delay_counter, val = 0, regval = 0;
+ int rc = 0;
+
+ res = platform_get_resource_byname(pdev, IORESOURCE_MEM, "pm-apcc-glb");
+ if (!res) {
+ dev_err(dev, "Missing PM APCC Global register physical address\n");
+ return -ENODEV;
+ }
+ ctrl->reg_base = devm_ioremap(dev, res->start, resource_size(res));
+ if (!ctrl->reg_base) {
+ dev_err(dev, "Failed to map PM APCC Global registers\n");
+ return -ENOMEM;
+ }
+
+ /*
+ * Initial APM register configuration required before starting
+ * APM HW controller.
+ */
+ regval = readl_relaxed(ctrl->reg_base + MSM8953_APM_DLY_CNTR);
+ val = regval;
+
+ if (of_find_property(dev->of_node, "qcom,apm-post-halt-delay", NULL)) {
+ rc = of_property_read_u32(dev->of_node,
+ "qcom,apm-post-halt-delay", &delay_counter);
+ if (rc < 0) {
+ dev_err(dev, "apm-post-halt-delay read failed, rc = %d",
+ rc);
+ return rc;
+ }
+
+ val &= ~APM_CTL_POST_HALT_DLY_MASK;
+ val |= (delay_counter << APM_CTL_POST_HALT_DLY_SHIFT)
+ & APM_CTL_POST_HALT_DLY_MASK;
+ }
+
+ if (of_find_property(dev->of_node, "qcom,apm-halt-clk-delay", NULL)) {
+ rc = of_property_read_u32(dev->of_node,
+ "qcom,apm-halt-clk-delay", &delay_counter);
+ if (rc < 0) {
+ dev_err(dev, "apm-halt-clk-delay read failed, rc = %d",
+ rc);
+ return rc;
+ }
+
+ val &= ~APM_CTL_HALT_CLK_DLY_MASK;
+ val |= (delay_counter << APM_CTL_HALT_CLK_DLY_SHIFT)
+ & APM_CTL_HALT_CLK_DLY_MASK;
+ }
+
+ if (of_find_property(dev->of_node, "qcom,apm-resume-clk-delay", NULL)) {
+ rc = of_property_read_u32(dev->of_node,
+ "qcom,apm-resume-clk-delay", &delay_counter);
+ if (rc < 0) {
+ dev_err(dev, "apm-resume-clk-delay read failed, rc = %d",
+ rc);
+ return rc;
+ }
+
+ val &= ~APM_CTL_RESUME_CLK_DLY_MASK;
+ val |= (delay_counter << APM_CTL_RESUME_CLK_DLY_SHIFT)
+ & APM_CTL_RESUME_CLK_DLY_MASK;
+ }
+
+ if (of_find_property(dev->of_node, "qcom,apm-sel-switch-delay", NULL)) {
+ rc = of_property_read_u32(dev->of_node,
+ "qcom,apm-sel-switch-delay", &delay_counter);
+ if (rc < 0) {
+ dev_err(dev, "apm-sel-switch-delay read failed, rc = %d",
+ rc);
+ return rc;
+ }
+
+ val &= ~APM_CTL_SEL_SWITCH_DLY_MASK;
+ val |= (delay_counter << APM_CTL_SEL_SWITCH_DLY_SHIFT)
+ & APM_CTL_SEL_SWITCH_DLY_MASK;
+ }
+
+ if (val != regval) {
+ writel_relaxed(val, ctrl->reg_base + MSM8953_APM_DLY_CNTR);
+ /* make sure write completes before return */
+ mb();
+ }
+
+ return rc;
+}
+
+static int msm8996_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US;
+ u32 regval;
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctrl_dev->lock, flags);
+
+ /* Perform revision-specific programming steps */
+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
+ /* Clear SPM events */
+ for (i = 0; i < SPM_EVENT_NUM; i++)
+ writel_relaxed(SPM_EVENT_CLEAR_VAL,
+ ctrl_dev->apcs_spm_events_addr[i]);
+
+ udelay(SPM_WAKEUP_DELAY_US);
+
+ /* Switch APC/CBF to GPLL0 clock */
+ writel_relaxed(APCS_GFMUXA_SEL_VAL,
+ ctrl_dev->apcs_csr_base + APCS_SPARE);
+ ndelay(200);
+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
+ ctrl_dev->apc0_pll_ctl_addr);
+ ndelay(200);
+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
+ ctrl_dev->apc1_pll_ctl_addr);
+
+ /* Ensure writes complete before proceeding */
+ mb();
+ }
+
+ /* Switch arrays to MX supply and wait for its completion */
+ writel_relaxed(MSM_APM_MX_MODE_VAL, ctrl_dev->reg_base +
+ APCC_APM_MODE);
+
+ /* Ensure write above completes before delaying */
+ mb();
+
+ while (timeout > 0) {
+ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS);
+ if ((regval & MSM_APM_CTL_STS_MASK) ==
+ MSM_APM_MX_DONE_VAL)
+ break;
+
+ udelay(1);
+ timeout--;
+ }
+
+ if (timeout == 0) {
+ ret = -ETIMEDOUT;
+ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
+ regval);
+ }
+
+ /* Perform revision-specific programming steps */
+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
+ /* Switch APC/CBF clocks to original source */
+ writel_relaxed(APCS_GFMUXA_DESEL_VAL,
+ ctrl_dev->apcs_csr_base + APCS_SPARE);
+ ndelay(200);
+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
+ ctrl_dev->apc0_pll_ctl_addr);
+ ndelay(200);
+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
+ ctrl_dev->apc1_pll_ctl_addr);
+
+ /* Complete clock source switch before SPM event sequence */
+ mb();
+
+ /* Set SPM events */
+ for (i = 0; i < SPM_EVENT_NUM; i++)
+ writel_relaxed(SPM_EVENT_SET_VAL,
+ ctrl_dev->apcs_spm_events_addr[i]);
+ }
+
+ if (!ret) {
+ ctrl_dev->supply = MSM_APM_SUPPLY_MX;
+ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n");
+ }
+
+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
+
+ return ret;
+}
+
+static int msm8996_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ int i, timeout = MSM_APM_SWITCH_TIMEOUT_US;
+ u32 regval;
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctrl_dev->lock, flags);
+
+ /* Perform revision-specific programming steps */
+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
+ /* Clear SPM events */
+ for (i = 0; i < SPM_EVENT_NUM; i++)
+ writel_relaxed(SPM_EVENT_CLEAR_VAL,
+ ctrl_dev->apcs_spm_events_addr[i]);
+
+ udelay(SPM_WAKEUP_DELAY_US);
+
+ /* Switch APC/CBF to GPLL0 clock */
+ writel_relaxed(APCS_GFMUXA_SEL_VAL,
+ ctrl_dev->apcs_csr_base + APCS_SPARE);
+ ndelay(200);
+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
+ ctrl_dev->apc0_pll_ctl_addr);
+ ndelay(200);
+ writel_relaxed(MSM_APM_OVERRIDE_SEL_VAL,
+ ctrl_dev->apc1_pll_ctl_addr);
+
+ /* Ensure previous writes complete before proceeding */
+ mb();
+ }
+
+ /* Switch arrays to APCC supply and wait for its completion */
+ writel_relaxed(MSM_APM_APCC_MODE_VAL, ctrl_dev->reg_base +
+ APCC_APM_MODE);
+
+ /* Ensure write above completes before delaying */
+ mb();
+
+ while (timeout > 0) {
+ regval = readl_relaxed(ctrl_dev->reg_base + APCC_APM_CTL_STS);
+ if ((regval & MSM_APM_CTL_STS_MASK) ==
+ MSM_APM_APCC_DONE_VAL)
+ break;
+
+ udelay(1);
+ timeout--;
+ }
+
+ if (timeout == 0) {
+ ret = -ETIMEDOUT;
+ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
+ regval);
+ }
+
+ /* Perform revision-specific programming steps */
+ if (ctrl_dev->version < HMSS_VERSION_1P2) {
+ /* Set SPM events */
+ for (i = 0; i < SPM_EVENT_NUM; i++)
+ writel_relaxed(SPM_EVENT_SET_VAL,
+ ctrl_dev->apcs_spm_events_addr[i]);
+
+ /* Complete SPM event sequence before clock source switch */
+ mb();
+
+ /* Switch APC/CBF clocks to original source */
+ writel_relaxed(APCS_GFMUXA_DESEL_VAL,
+ ctrl_dev->apcs_csr_base + APCS_SPARE);
+ ndelay(200);
+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
+ ctrl_dev->apc0_pll_ctl_addr);
+ ndelay(200);
+ writel_relaxed(MSM_APM_SEC_CLK_SEL_VAL,
+ ctrl_dev->apc1_pll_ctl_addr);
+ }
+
+ if (!ret) {
+ ctrl_dev->supply = MSM_APM_SUPPLY_APCC;
+ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n");
+ }
+
+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
+
+ return ret;
+}
+
+/* 8953 register value definitions */
+#define MSM8953_APM_MX_MODE_VAL 0x00
+#define MSM8953_APM_APCC_MODE_VAL 0x02
+#define MSM8953_APM_MX_DONE_VAL 0x00
+#define MSM8953_APM_APCC_DONE_VAL 0x03
+
+/* 8953 register offset definitions */
+#define MSM8953_APCC_APM_MODE 0x000002a8
+#define MSM8953_APCC_APM_CTL_STS 0x000002b0
+
+/* 8953 constants */
+#define MSM8953_APM_SWITCH_TIMEOUT_US 500
+
+/* Register bit mask definitions */
+#define MSM8953_APM_CTL_STS_MASK 0x1f
+
+static int msm8953_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US;
+ u32 regval;
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctrl_dev->lock, flags);
+
+ /* Switch arrays to MX supply and wait for its completion */
+ writel_relaxed(MSM8953_APM_MX_MODE_VAL, ctrl_dev->reg_base +
+ MSM8953_APCC_APM_MODE);
+
+ /* Ensure write above completes before delaying */
+ mb();
+
+ while (timeout > 0) {
+ regval = readl_relaxed(ctrl_dev->reg_base +
+ MSM8953_APCC_APM_CTL_STS);
+ if ((regval & MSM8953_APM_CTL_STS_MASK) ==
+ MSM8953_APM_MX_DONE_VAL)
+ break;
+
+ udelay(1);
+ timeout--;
+ }
+
+ if (timeout == 0) {
+ ret = -ETIMEDOUT;
+ dev_err(ctrl_dev->dev, "APCC to MX APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
+ regval);
+ } else {
+ ctrl_dev->supply = MSM_APM_SUPPLY_MX;
+ dev_dbg(ctrl_dev->dev, "APM supply switched to MX\n");
+ }
+
+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
+
+ return ret;
+}
+
+static int msm8953_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ int timeout = MSM8953_APM_SWITCH_TIMEOUT_US;
+ u32 regval;
+ int ret = 0;
+ unsigned long flags;
+
+ spin_lock_irqsave(&ctrl_dev->lock, flags);
+
+ /* Switch arrays to APCC supply and wait for its completion */
+ writel_relaxed(MSM8953_APM_APCC_MODE_VAL, ctrl_dev->reg_base +
+ MSM8953_APCC_APM_MODE);
+
+ /* Ensure write above completes before delaying */
+ mb();
+
+ while (timeout > 0) {
+ regval = readl_relaxed(ctrl_dev->reg_base +
+ MSM8953_APCC_APM_CTL_STS);
+ if ((regval & MSM8953_APM_CTL_STS_MASK) ==
+ MSM8953_APM_APCC_DONE_VAL)
+ break;
+
+ udelay(1);
+ timeout--;
+ }
+
+ if (timeout == 0) {
+ ret = -ETIMEDOUT;
+ dev_err(ctrl_dev->dev, "MX to APCC APM switch timed out. APCC_APM_CTL_STS=0x%x\n",
+ regval);
+ } else {
+ ctrl_dev->supply = MSM_APM_SUPPLY_APCC;
+ dev_dbg(ctrl_dev->dev, "APM supply switched to APCC\n");
+ }
+
+ spin_unlock_irqrestore(&ctrl_dev->lock, flags);
+
+ return ret;
+}
+
+static int msm_apm_switch_to_mx(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ int ret = 0;
+
+ switch (ctrl_dev->msm_id) {
+ case MSM8996_ID:
+ ret = msm8996_apm_switch_to_mx(ctrl_dev);
+ break;
+ case MSM8953_ID:
+ case IPQ807x_ID:
+ ret = msm8953_apm_switch_to_mx(ctrl_dev);
+ break;
+ }
+
+ return ret;
+}
+
+static int msm_apm_switch_to_apcc(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ int ret = 0;
+
+ switch (ctrl_dev->msm_id) {
+ case MSM8996_ID:
+ ret = msm8996_apm_switch_to_apcc(ctrl_dev);
+ break;
+ case MSM8953_ID:
+ case IPQ807x_ID:
+ ret = msm8953_apm_switch_to_apcc(ctrl_dev);
+ break;
+ }
+
+ return ret;
+}
+
+/**
+ * msm_apm_get_supply() - Returns the supply that is currently
+ * powering the memory arrays
+ * @ctrl_dev: Pointer to an MSM APM controller device
+ *
+ * Returns the supply currently selected by the APM.
+ */
+int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ return ctrl_dev->supply;
+}
+EXPORT_SYMBOL(msm_apm_get_supply);
+
+/**
+ * msm_apm_set_supply() - Perform the necessary steps to switch the voltage
+ * source of the memory arrays to a given supply
+ * @ctrl_dev: Pointer to an MSM APM controller device
+ * @supply: Power rail to use as supply for the memory
+ * arrays
+ *
+ * Returns 0 on success, -ETIMEDOUT on APM switch timeout, or -EPERM if
+ * the supply is not supported.
+ */
+int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev,
+ enum msm_apm_supply supply)
+{
+ int ret;
+
+ switch (supply) {
+ case MSM_APM_SUPPLY_APCC:
+ ret = msm_apm_switch_to_apcc(ctrl_dev);
+ break;
+ case MSM_APM_SUPPLY_MX:
+ ret = msm_apm_switch_to_mx(ctrl_dev);
+ break;
+ default:
+ ret = -EPERM;
+ break;
+ }
+
+ return ret;
+}
+EXPORT_SYMBOL(msm_apm_set_supply);
+
+/**
+ * msm_apm_ctrl_dev_get() - get a handle to the MSM APM controller linked to
+ * the device in device tree
+ * @dev: Pointer to the device
+ *
+ * The device must specify "qcom,apm-ctrl" property in its device tree
+ * node which points to an MSM APM controller device node.
+ *
+ * Returns an MSM APM controller handle if successful or ERR_PTR on any error.
+ * If the APM controller device hasn't probed yet, ERR_PTR(-EPROBE_DEFER) is
+ * returned.
+ */
+struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev)
+{
+ struct msm_apm_ctrl_dev *ctrl_dev = NULL;
+ struct msm_apm_ctrl_dev *dev_found = ERR_PTR(-EPROBE_DEFER);
+ struct device_node *ctrl_node;
+
+ if (!dev || !dev->of_node) {
+ pr_err("Invalid device node\n");
+ return ERR_PTR(-EINVAL);
+ }
+
+ ctrl_node = of_parse_phandle(dev->of_node, "qcom,apm-ctrl", 0);
+ if (!ctrl_node) {
+ pr_err("Could not find qcom,apm-ctrl property in %s\n",
+ dev->of_node->full_name);
+ return ERR_PTR(-ENXIO);
+ }
+
+ mutex_lock(&apm_ctrl_list_mutex);
+ list_for_each_entry(ctrl_dev, &apm_ctrl_list, list) {
+ if (ctrl_dev->dev && ctrl_dev->dev->of_node == ctrl_node) {
+ dev_found = ctrl_dev;
+ break;
+ }
+ }
+ mutex_unlock(&apm_ctrl_list_mutex);
+
+ of_node_put(ctrl_node);
+ return dev_found;
+}
+EXPORT_SYMBOL(msm_apm_ctrl_dev_get);
+
+#if defined(CONFIG_DEBUG_FS)
+
+static int apm_supply_dbg_open(struct inode *inode, struct file *filep)
+{
+ filep->private_data = inode->i_private;
+
+ return 0;
+}
+
+static ssize_t apm_supply_dbg_read(struct file *filep, char __user *ubuf,
+ size_t count, loff_t *ppos)
+{
+ struct msm_apm_ctrl_dev *ctrl_dev = filep->private_data;
+ char buf[10];
+ int len;
+
+ if (!ctrl_dev) {
+ pr_err("invalid apm ctrl handle\n");
+ return -ENODEV;
+ }
+
+ if (ctrl_dev->supply == MSM_APM_SUPPLY_APCC)
+ len = snprintf(buf, sizeof(buf), "APCC\n");
+ else if (ctrl_dev->supply == MSM_APM_SUPPLY_MX)
+ len = snprintf(buf, sizeof(buf), "MX\n");
+ else
+ len = snprintf(buf, sizeof(buf), "ERR\n");
+
+ return simple_read_from_buffer(ubuf, count, ppos, buf, len);
+}
+
+static const struct file_operations apm_supply_fops = {
+ .open = apm_supply_dbg_open,
+ .read = apm_supply_dbg_read,
+};
+
+static void apm_debugfs_base_init(void)
+{
+ apm_debugfs_base = debugfs_create_dir("msm-apm", NULL);
+
+ if (IS_ERR_OR_NULL(apm_debugfs_base))
+ pr_err("msm-apm debugfs base directory creation failed\n");
+}
+
+static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ struct dentry *temp;
+
+ if (IS_ERR_OR_NULL(apm_debugfs_base)) {
+ pr_err("Base directory missing, cannot create apm debugfs nodes\n");
+ return;
+ }
+
+ ctrl_dev->debugfs = debugfs_create_dir(dev_name(ctrl_dev->dev),
+ apm_debugfs_base);
+ if (IS_ERR_OR_NULL(ctrl_dev->debugfs)) {
+ pr_err("%s debugfs directory creation failed\n",
+ dev_name(ctrl_dev->dev));
+ return;
+ }
+
+ temp = debugfs_create_file("supply", S_IRUGO, ctrl_dev->debugfs,
+ ctrl_dev, &apm_supply_fops);
+ if (IS_ERR_OR_NULL(temp)) {
+ pr_err("supply mode creation failed\n");
+ return;
+ }
+}
+
+static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev)
+{
+ if (!IS_ERR_OR_NULL(ctrl_dev->debugfs))
+ debugfs_remove_recursive(ctrl_dev->debugfs);
+}
+
+static void apm_debugfs_base_remove(void)
+{
+ debugfs_remove_recursive(apm_debugfs_base);
+}
+#else
+
+static void apm_debugfs_base_init(void)
+{}
+
+static void apm_debugfs_init(struct msm_apm_ctrl_dev *ctrl_dev)
+{}
+
+static void apm_debugfs_deinit(struct msm_apm_ctrl_dev *ctrl_dev)
+{}
+
+static void apm_debugfs_base_remove(void)
+{}
+
+#endif
+
+static struct of_device_id msm_apm_match_table[] = {
+ {
+ .compatible = "qcom,msm-apm",
+ .data = (void *)(uintptr_t)MSM8996_ID,
+ },
+ {
+ .compatible = "qcom,msm8953-apm",
+ .data = (void *)(uintptr_t)MSM8953_ID,
+ },
+ {
+ .compatible = "qcom,ipq807x-apm",
+ .data = (void *)(uintptr_t)IPQ807x_ID,
+ },
+ {}
+};
+
+static int msm_apm_probe(struct platform_device *pdev)
+{
+ struct device *dev = &pdev->dev;
+ struct msm_apm_ctrl_dev *ctrl;
+ const struct of_device_id *match;
+ int ret = 0;
+
+ dev_dbg(dev, "probing MSM Array Power Mux driver\n");
+
+ if (!dev->of_node) {
+ dev_err(dev, "Device tree node is missing\n");
+ return -ENODEV;
+ }
+
+ match = of_match_device(msm_apm_match_table, dev);
+ if (!match)
+ return -ENODEV;
+
+ ctrl = devm_kzalloc(dev, sizeof(*ctrl), GFP_KERNEL);
+ if (!ctrl) {
+ dev_err(dev, "MSM APM controller memory allocation failed\n");
+ return -ENOMEM;
+ }
+
+ INIT_LIST_HEAD(&ctrl->list);
+ spin_lock_init(&ctrl->lock);
+ ctrl->dev = dev;
+ ctrl->msm_id = (uintptr_t)match->data;
+ platform_set_drvdata(pdev, ctrl);
+
+ switch (ctrl->msm_id) {
+ case MSM8996_ID:
+ ret = msm_apm_ctrl_devm_ioremap(pdev, ctrl);
+ if (ret) {
+ dev_err(dev, "Failed to add APM controller device\n");
+ return ret;
+ }
+ break;
+ case MSM8953_ID:
+ case IPQ807x_ID:
+ ret = msm8953_apm_ctrl_init(pdev, ctrl);
+ if (ret) {
+ dev_err(dev, "Failed to initialize APM controller device: ret=%d\n",
+ ret);
+ return ret;
+ }
+ break;
+ default:
+ dev_err(dev, "unable to add APM controller device for msm_id:%d\n",
+ ctrl->msm_id);
+ return -ENODEV;
+ }
+
+ apm_debugfs_init(ctrl);
+ mutex_lock(&apm_ctrl_list_mutex);
+ list_add_tail(&ctrl->list, &apm_ctrl_list);
+ mutex_unlock(&apm_ctrl_list_mutex);
+
+ dev_dbg(dev, "MSM Array Power Mux driver probe successful");
+
+ return ret;
+}
+
+static int msm_apm_remove(struct platform_device *pdev)
+{
+ struct msm_apm_ctrl_dev *ctrl_dev;
+
+ ctrl_dev = platform_get_drvdata(pdev);
+ if (ctrl_dev) {
+ mutex_lock(&apm_ctrl_list_mutex);
+ list_del(&ctrl_dev->list);
+ mutex_unlock(&apm_ctrl_list_mutex);
+ apm_debugfs_deinit(ctrl_dev);
+ }
+
+ return 0;
+}
+
+static struct platform_driver msm_apm_driver = {
+ .driver = {
+ .name = MSM_APM_DRIVER_NAME,
+ .of_match_table = msm_apm_match_table,
+ .owner = THIS_MODULE,
+ },
+ .probe = msm_apm_probe,
+ .remove = msm_apm_remove,
+};
+
+static int __init msm_apm_init(void)
+{
+ apm_debugfs_base_init();
+ return platform_driver_register(&msm_apm_driver);
+}
+
+static void __exit msm_apm_exit(void)
+{
+ platform_driver_unregister(&msm_apm_driver);
+ apm_debugfs_base_remove();
+}
+
+arch_initcall(msm_apm_init);
+module_exit(msm_apm_exit);
+
+MODULE_DESCRIPTION("MSM Array Power Mux driver");
+MODULE_LICENSE("GPL v2");
--- /dev/null
+++ b/include/linux/power/qcom/apm.h
@@ -0,0 +1,48 @@
+/*
+ * Copyright (c) 2015, The Linux Foundation. All rights reserved.
+ *
+ * This program is free software; you can redistribute it and/or modify
+ * it under the terms of the GNU General Public License version 2 and
+ * only version 2 as published by the Free Software Foundation.
+ *
+ * This program is distributed in the hope that it will be useful,
+ * but WITHOUT ANY WARRANTY; without even the implied warranty of
+ * MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
+ * GNU General Public License for more details.
+ */
+
+#ifndef __LINUX_POWER_QCOM_APM_H__
+#define __LINUX_POWER_QCOM_APM_H__
+
+#include <linux/device.h>
+#include <linux/err.h>
+
+/**
+ * enum msm_apm_supply - supported power rails to supply memory arrays
+ * %MSM_APM_SUPPLY_APCC: to enable selection of VDD_APCC rail as supply
+ * %MSM_APM_SUPPLY_MX: to enable selection of VDD_MX rail as supply
+ */
+enum msm_apm_supply {
+ MSM_APM_SUPPLY_APCC,
+ MSM_APM_SUPPLY_MX,
+};
+
+/* Handle used to identify an APM controller device */
+struct msm_apm_ctrl_dev;
+
+#ifdef CONFIG_QCOM_APM
+struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev);
+int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev,
+ enum msm_apm_supply supply);
+int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev);
+
+#else
+static inline struct msm_apm_ctrl_dev *msm_apm_ctrl_dev_get(struct device *dev)
+{ return ERR_PTR(-EPERM); }
+static inline int msm_apm_set_supply(struct msm_apm_ctrl_dev *ctrl_dev,
+ enum msm_apm_supply supply)
+{ return -EPERM; }
+static inline int msm_apm_get_supply(struct msm_apm_ctrl_dev *ctrl_dev)
+{ return -EPERM; }
+#endif
+#endif
Reference in New Issue View Git Blame Copy Permalink