openwrt/target
John Crispin 0fbdb51f76 ipq40xx: add Edgecore OAP-100 support
flashing the unit
* first update to latest edcore FW as per the PDF instructions
* boot the initramfs
  - tftpboot 0x88000000 openwrt-ipq40xx-generic-edgecore_oap100-initramfs-fit-uImage.itb; bootm
* inside the initramfs call the following commiands
  - ubiattach -p /dev/mtd0
  - ubirmvol /dev/ubi0 -n0
  - ubirmvol /dev/ubi0 -n1
  - ubirmvol /dev/ubi0 -n2
* scp the sysupgrade image to the board and call
  - sysupgrade -n openwrt-ipq40xx-generic-edgecore_oap100-squashfs-nand-sysupgrade.bin

Signed-off-by: John Crispin <john@phrozen.org>
2020-09-17 08:43:07 +02:00
..
imagebuilder build: add whatdepends target to imagebuilder 2020-08-31 11:18:24 +01:00
linux ipq40xx: add Edgecore OAP-100 support 2020-09-17 08:43:07 +02:00
sdk build: SDK/IB reproducible and faster compression 2020-08-23 18:55:49 +02:00
toolchain build: improve ccache support 2020-07-11 15:19:53 +02:00
Config.in build: define RTC_SUPPORT as a bool 2020-04-09 12:51:10 +02:00
Makefile