Diogenes Rengo cce2e8db56 ath79: add support for TP-Link TL-WR941HP v1
Specifications:
    SOC:        Qualcomm Atheros TP9343 (750 MHz)
    Flash:      8 Mb (GigaDevice GD25Q64CSIG)
    RAM:        64 Mb (Zentel A3R12E40DBF-8E)
    Serial:     yes, 4-pin header
    Wlan:       Qualcomm Atheros TP9343, antenna: MIM0 3x3:3 RP-SMA
                3 x 2.4GHz power amp module Skyworks (SiGe) SE2576L
    Ethernet:   Qualcomm Atheros TP9343
    Lan speed:  100M ports: 4
    Lan speed:  100M ports: 1
    Other info: same case, ram and flash that TP-Link TL-WR841HP,
                different SOC

    https://forum.openwrt.org/t/adding-device-support-tp-link-wr941hp/

Label MAC addresses based on vendor firmware:
    LAN   *:ee  label
    WAN   *:ef  label +1
    WLAN  *:ee  label

    The label MAC address found in "config" partition at 0x8

Flash instruction:
    Upload the generated factory firmware on web interface.

Signed-off-by: Diogenes Rengo <rengocbx250@gmail.com>
[remove various whitespace issues, squash commits, use short 0x0]
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
2021-07-04 18:07:35 +02:00
..
2020-11-21 18:49:08 +01:00
2021-06-19 08:42:50 -10:00
2020-08-30 22:21:34 +02:00
2021-02-28 00:09:09 +00:00
2020-11-21 18:48:39 +01:00
2018-11-25 19:23:03 +01:00
2019-07-08 16:42:26 +02:00
2020-11-21 18:49:17 +01:00
2020-03-14 13:20:06 +00:00
2021-06-06 00:26:13 +02:00
2021-06-20 15:20:54 -10:00
2020-11-21 18:49:27 +01:00
2020-08-23 19:40:32 +02:00
2020-04-09 22:09:04 +02:00
2020-09-02 16:29:22 +02:00
2020-12-31 10:03:21 +01:00
2019-11-24 21:35:45 +01:00
2020-02-18 21:39:14 +01:00
2019-03-10 21:36:28 +01:00
2021-03-01 16:39:17 +00:00
2020-04-09 22:09:13 +02:00