ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-30 02:29:01 +00:00
Code Issues Actions 4 Packages Projects Releases Wiki Activity
0f9b8aa3f5
openwrt/target/linux/layerscape/README
Wojciech Dubowik 924a5aabc7 layerscape: Add ls1028ardb support 
Add support for NXP LS1028ARDB reference board. It's a dual core
Coretex-A53 board with 4G RAM and 5 Eternet ports (4 ports are
connected to MSCC Felix switch).

The original layout of NXP board has been kept but firmware
images are adapted to be more sysupgrade friendly. At the moment
NOR and SD boots are supported.

NOR flash instructions:
* make sd card with sdboot image
* boot
* write firmware image to spi flash
$ mtd write /tmp/openwrt-layerscape-armv8_64b-fsl_ls1028a-rdb-
squashfs-firmware.bin /dev/mtd0
* change jumper to NOR boot and reset

V3:
 * Added board specific network defaults for lan/wan

v2:
 * Added INA220 curent monitor, PCF2129 RTC clock and NXP
   SA56004ED temperature sensor to default packages
 * removed compat fixups for thist board

Signed-off-by: Wojciech Dubowik <Wojciech.Dubowik@protonmail.ch>
2023-05-07 14:50:50 +02:00

223 lines
7.1 KiB
Plaintext
Raw Blame History

Layerscape Quick Start
This is a quick start guide for Layerscape specific usage, like introducing
how to configure, build, and deploy OpenWrt to Layerscape boards, so that
users can bring up the board without difficulty.
1. Target support
----------------------------
* ARMv8 64-bit
LS1012ARDB (QSPI NOR boot)
LS1012AFRDM (QSPI NOR boot)
LS1012AFRWY (QSPI NOR boot)
LS1028ARDB (QSPI NOR boot | SD card boot)
LS1043ARDB (NOR boot | SD card boot)
LS1046ARDB (QSPI NOR boot | SD card boot)
LS1046AFRWY (QSPI NOR boot | SD card boot)
LS1088ARDB (QSPI NOR boot | SD card boot)
LS2088ARDB (NOR boot)
LX2160ARDB Rev2.0 (FlexSPI NOR boot | SD card boot)
* ARMv7
LS1021ATWR (NOR boot | SD card boot)
LS1021AIOT (SD card boot)
2. Build
--------
Before configuration and build, update and install package feeds.
$ ./scripts/feeds update -a
$ ./scripts/feeds install -a
* make menuconfig
Target System: "NXP Layerscape"
Subtarget: (Select subtarget)
Target Profile: (Select device, or "Multiple devices")
Target Devices: (Select devices. Available when Target Profile is "Multiple devices")
Target Images: (Disable "GZip images" if you don't want to unzip manually to use the images.)
Note: The first time make menuconfig would create a .config file which
would include all dependencies for selected target. After that, make
menuconfig still could be used to modify packages. If want to change
other target, please remove .config and make menuconfig to select again.
Otherwise the packages selected in .config would be a mess.
* make download (or make download -j<n>)
* make (or make -j<n>)
* Final firmware/image
Path: bin/targets/layerscape/<subtarget>/
Firmware for flash: openwrt-layerscape-<subtarget>-<device>-<rootfs>-firmware.bin
Image for SD card: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sdcard.img.gz
Sysupgrade images: openwrt-layerscape-<subtarget>-<device>-<rootfs>-sysupgrade.bin
3. Deploy
---------
The firmware.bin or sdcard.img is an all-in-one image including all things
for OpenWrt staring up except LS1012AFRWY (Refer to 3.3).
If you want to install all things into flash, please use firmware.bin.
If you want to install all things into SD card, please use sdcard.img.
3.1 Program sdcard.img to SD card
---------------------------------
sdcard.img could be programmed to SD card in either u-boot environment
or linux environment. After programming, configure the board to boot
from SD card. (sdcard.img images are gz-iped to save space. Please extract them first.)
* u-boot environment
=> tftp a0000000 <image_name>-sdcard.img
=> mmc write a0000000 0 a0000
Note: The default sdcard.img size is 320MB. a0000 is the block number for 320MB.
blk_num = filesize / 512.
* linux environment
$ dd if=./<image_name>-sdcard.img of=/dev/mmcblkx
Note: Need to check the SD card device name to replace "mmcblkx".
3.2 Program firmware.bin to flash
---------------------------------
* LS1012ARDB
Start up from bank1, and program firmware to bank2 with below commands.
Switch to bank2 to start up OpenWrt.
=> tftp a0000000 <firmware_name>-firmware.bin
=> i2c mw 0x24 0x7 0xfc;i2c mw 0x24 0x3 0xf5
=> sf probe 0:0
=> sf erase 0 +$filesize
=> sf write a0000000 0 $filesize
=> reset
* LS1028ARDB
Board has only one bank. Those commands will replace stock bootloader
and firmware.
=> tftp a0000000 <firmware_name>-firmware.bin
=> sf probe 0:0
=> sf erase 0 +$filesize
=> sf write a0000000 0 $filesize
=> reset
* LS1043ARDB
Start up from bank0, and program firmware to bank4 with below commands.
Switch to bank4 to start up OpenWrt.
=> tftp a0000000 <firmware_name>-firmware.bin
=> protect off all
=> erase 64000000 +$filesize
=> cp.b a0000000 64000000 $filesize
=> cpld reset altbank
* LS1046ARDB
Start up from bank1, and program firmware to bank2 with below commands.
Switch to bank2 to start up OpenWrt.
=> tftp a0000000 <firmware_name>-firmware.bin
=> sf probe 0:1
=> sf erase 0 +$filesize
=> sf write a0000000 0 $filesize
=> cpld reset altbank
* LS2088ARDB
Start up from bank0, and program firmware to bank4 with below commands.
Switch to bank4 to start up OpenWrt.
=> tftp a0000000 <firmware_name>-firmware.bin
=> protect off all
=> erase 584000000 +$filesize
=> cp.b a0000000 584000000 $filesize
=> qix altbank
* LS1012FRDM/LS1046AFRWY
Board has only one bank. Those commands will replace stock bootloader
and firmware.
=> tftp a0000000 <firmware_name>-firmware.bin
=> sf probe 0:0
=> sf erase 0 +$filesize
=> sf write a0000000 0 $filesize
=> reset
* LS1088ARDB/LX2160ARDB Rev2.0
Start up from bank0, and program firmware to bank1 with below commands.
Switch to bank1 to start up OpenWrt.
=> tftp a0000000 <firmware_name>-firmware.bin
=> sf probe 0:1
=> sf erase 0 +$filesize
=> sf write a0000000 0 $filesize
=> qix altbank
Note: old version u-boot of ls1088ardb may use below commands to switch to
bank1 instead of 'qix altbank'.
=> i2c mw 66 50 20;i2c mw 66 10 20;i2c mw 66 10 21
* LS1021ATWR
Start up from bank0, and program firmware to bank4 with below commands.
Switch to bank4 to start up OpenWrt.
=> tftp a0000000 <firmware_name>-firmware.bin
=> protect off all
=> erase 64000000 +$filesize
=> cp.b a0000000 64000000 $filesize
=> boot_bank 1
3.3 Program LS1012AFRWY
-----------------------
* LS1012AFRWY (QSPI flash + SD card)
LS1012AFRWY only supports 2MB QSPI flash. We have to put u-boot, and
some firmwares on QSPI flash, and kernel/dtb/rootfs on SD card.
So both firmware.bin and sdcard.img are needed for OpenWrt starting up.
To program sdcard.img, please use linux command described in 3.1 on a
linux machine.
To program firmware.bin, start up board from QSPI flash, and program
firmware with below commands. Reset to start up OpenWrt. (LS1012AFRWY
supports only one bank.)
=> tftp 96000000 <firmware_name>-firmware.bin
=> sf probe 0:0
=> sf erase 0 +$filesize
=> sf write 96000000 0 $filesize
=> reset
4. Known issues and limitation
------------------------------
* U-boot may fail to read MAC addresses from EEPROM on some boards and there
won't be MAC addresses set in environment. This may cause kernel fails to
probe these network interfaces. The workaround is to set MAC addresses
manually, for example,
=> setenv ethaddr 00:04:9F:04:65:4b
=> setenv eth1addr 00:04:9F:04:65:4c
=> saveenv
* In case users want to refer Layerscape SDK doc for network configuration,
like TSN (Time-Sensitive Networking) on LS1028A, the OpenWrt LAN/WAN router
setting should be removed before that.
# ubus call network.interface.lan remove
# ubus call network.interface.wan remove
# ubus call network.interface.wan6 remove
And firewall may be needed to stop.
# /etc/init.d/firewall stop
5. Other references
-------------------
- NXP LSDK source: https://lsdk.github.io/
- NXP LSDK site: https://www.nxp.com/design/software/embedded-software/linux-software-and-development-tools/layerscape-software-development-kit:LAYERSCAPE-SDK
- OpenWrt documentation: https://openwrt.org/docs/start
Reference in New Issue View Git Blame Copy Permalink