mirror of
https://github.com/openwrt/openwrt.git
synced 2025-01-19 03:06:35 +00:00
a00ff9f6d1
Some checks are pending
Build Kernel / Build all affected Kernels (push) Waiting to run
Build all core packages / Build all core packages for selected target (push) Waiting to run
Build and Push prebuilt tools container / Build and Push all prebuilt containers (push) Waiting to run
Build host tools / Build host tools for linux and macos based systems (push) Waiting to run
TP-Link EAP610-Outdoor is a 802.11ax AP claiming AX1800 support. It is
wall or pole mountable, and rated for outdoor use. It can only be
powered via PoE.
Specifications:
---------------
* CPU: Qualcomm IPQ6018 Quad core Cortex-A53
* RAM: 512 MB
* Storage: ESMT PSR1GA30DT 128MB NAND
* Ethernet:
* Gigabit RJ45 port with PoE input
* WLAN:
* 2.4GHz/5GHz
* LEDs:
* Multi-color System LED (Green/Amber)
* Buttons:
* 1x Reset
* UART: 4-pin unpopulated header
* 1.8 V level, Pinout 1 - TX, 2 - RX, 3 - GND, 4 - 1.8V
Installation:
=============
Web UI method
-------------
Set up the device using the vendor's web UI. After that go to
Management->SSH and enable the "SSH Login" checkbox. Select "Save".
The connect to the machine via SSH:
ssh -o hostkeyalgorithms=ssh-rsa <ip_of_device>
Disable signature verification:
cliclientd stopcs
Rename the "-web-ui-factory" image to something less than 63
characters, maintaining the ".bin" suffix.
* Go to System -> Firmware Update.
* Under "New Firmware File", click "Browse" and select the image
* Select "Update" and confirm by clicking "OK".
If the update fails, the web UI should show an error message.
Otherwise, the device should reboot into OpenWRT.
TFTP method
-----------
To flash via tftp, first place the initramfs image on the TFTP server.
setenv serverip <ip of tftp server>
setenv ipaddr <ip in same subnet as tftp server>
tftpboot tplink_eap610-outdoor-initramfs-uImage.itb
bootm
This should boot OpenWRT. Once booted, flash the sysupgrade.bin image
using either luci or the commandline.
The tplink2022 image format
============================
The vendor images of this device are packaged in a format that does
not match any previous tplink formats. In order for flashing to work
from the vendor's web UI, firmware updates need to be packaged in
this format. The `tplink-mkimage-2022.py` is provided for this
purpose.
This script can also analyze vendor images, and extract the required
"support" string. This string is checked by the vendor firmware, and
images with a missing or incorrect string are rejected.
Signed-off-by: Alexandru Gagniuc <mr.nuke.me@gmail.com>
Link: https://github.com/openwrt/openwrt/pull/14922
Signed-off-by: Robert Marko <robimarko@gmail.com>
|
||
|---|---|---|
| .. | ||
| config | ||
| flashing | ||
| belkin-header.py | ||
| brcmImage.pl | ||
| bundle-libraries.sh | ||
| cameo-imghdr.py | ||
| cameo-tag.py | ||
| cfe-bin-header.py | ||
| cfe-partition-tag.py | ||
| cfe-wfi-tag.py | ||
| check-toolchain-clean.sh | ||
| checkpatch.pl | ||
| clean-package.sh | ||
| cleanfile | ||
| cleanpatch | ||
| combined-ext-image.sh | ||
| combined-image.sh | ||
| command_all.sh | ||
| config.guess | ||
| config.rpath | ||
| config.sub | ||
| const_structs.checkpatch | ||
| deptest.sh | ||
| diffconfig.sh | ||
| dl_cleanup.py | ||
| dl_github_archive.py | ||
| download-check-artifact.sh | ||
| download.pl | ||
| dump-target-info.pl | ||
| env | ||
| ext-toolchain.sh | ||
| ext-tools.sh | ||
| feeds | ||
| fixup-makefile.pl | ||
| functions.sh | ||
| gen_image_generic.sh | ||
| gen-dependencies.sh | ||
| get_source_date_epoch.sh | ||
| getver.sh | ||
| ipkg-build | ||
| ipkg-make-index.sh | ||
| ipkg-remove | ||
| json_add_image_info.py | ||
| json_overview_image_info.py | ||
| kconfig-reorder.sh | ||
| kconfig.pl | ||
| kernel_bump.sh | ||
| linksys-image.sh | ||
| make-ipkg-dir.sh | ||
| md5sum | ||
| metadata.pm | ||
| mkhash.c | ||
| mkits-qsdk-ipq-image.sh | ||
| mkits-zyxel-fit-filogic.sh | ||
| mkits-zyxel-fit.sh | ||
| mkits.sh | ||
| moxa-encode-fw.py | ||
| netgear-encrypted-factory.py | ||
| noop.sh | ||
| om-fwupgradecfg-gen.sh | ||
| package-metadata.pl | ||
| pad_image | ||
| patch-kernel.sh | ||
| patch-specs.sh | ||
| portable_date.sh | ||
| projectsmirrors.json | ||
| qemustart | ||
| redboot-script.pl | ||
| relink-lib.sh | ||
| remote-gdb | ||
| rstrip.sh | ||
| sercomm-crypto.py | ||
| sercomm-kernel-header.py | ||
| sercomm-partition-tag.py | ||
| sercomm-payload.py | ||
| sercomm-pid.py | ||
| sign_images.sh | ||
| size_compare.sh | ||
| slugimage.pl | ||
| spelling.txt | ||
| srecimage.pl | ||
| strip-kmod.sh | ||
| symlink-tree.sh | ||
| sysupgrade-tar.sh | ||
| target-metadata.pl | ||
| time.pl | ||
| timestamp.pl | ||
| tplink-mkimage-2022.py | ||
| ubinize-image.sh | ||
| xxdi.pl | ||