mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
62ede4f783
Refreshed all patches. Removed upstreamed parts. Compile-tested: cns3xxx, imx6, mvebu, layerscape Run-tested: cns3xxx, imx6 Signed-off-by: Koen Vandeputte <koen.vandeputte@ncentric.com>
215 lines
6.2 KiB
Diff
215 lines
6.2 KiB
Diff
mtd: spi-nor: add support for switching between 3-byte and 4-byte addressing on w25q256 flash
|
|
|
|
On some devices the flash chip needs to be in 3-byte addressing mode during
|
|
reboot, otherwise the boot loader will fail to start.
|
|
This mode however does not allow regular reads/writes onto the upper 16M
|
|
half. W25Q256 has separate read commands for reading from >16M, however
|
|
it does not have any separate write commands.
|
|
This patch changes the code to leave the chip in 3-byte mode most of the
|
|
time and only switch during erase/write cycles that go to >16M
|
|
addresses.
|
|
|
|
Signed-off-by: Felix Fietkau <nbd@nbd.name>
|
|
---
|
|
--- a/drivers/mtd/spi-nor/spi-nor.c
|
|
+++ b/drivers/mtd/spi-nor/spi-nor.c
|
|
@@ -85,6 +85,10 @@ struct flash_info {
|
|
* Use dedicated 4byte address op codes
|
|
* to support memory size above 128Mib.
|
|
*/
|
|
+#define SPI_NOR_4B_READ_OP BIT(12) /*
|
|
+ * Like SPI_NOR_4B_OPCODES, but for read
|
|
+ * op code only.
|
|
+ */
|
|
};
|
|
|
|
#define JEDEC_MFR(info) ((info)->id[0])
|
|
@@ -250,6 +254,15 @@ static inline u8 spi_nor_convert_3to4_er
|
|
ARRAY_SIZE(spi_nor_3to4_erase));
|
|
}
|
|
|
|
+static void spi_nor_set_4byte_read(struct spi_nor *nor,
|
|
+ const struct flash_info *info)
|
|
+{
|
|
+ nor->addr_width = 3;
|
|
+ nor->ext_addr = 0;
|
|
+ nor->read_opcode = spi_nor_convert_3to4_read(nor->read_opcode);
|
|
+ nor->flags |= SNOR_F_4B_EXT_ADDR;
|
|
+}
|
|
+
|
|
static void spi_nor_set_4byte_opcodes(struct spi_nor *nor,
|
|
const struct flash_info *info)
|
|
{
|
|
@@ -467,6 +480,36 @@ static int spi_nor_erase_sector(struct s
|
|
return nor->write_reg(nor, nor->erase_opcode, buf, nor->addr_width);
|
|
}
|
|
|
|
+static int spi_nor_check_ext_addr(struct spi_nor *nor, u32 addr)
|
|
+{
|
|
+ bool ext_addr;
|
|
+ int ret;
|
|
+ u8 cmd;
|
|
+
|
|
+ if (!(nor->flags & SNOR_F_4B_EXT_ADDR))
|
|
+ return 0;
|
|
+
|
|
+ ext_addr = !!(addr & 0xff000000);
|
|
+ if (nor->ext_addr == ext_addr)
|
|
+ return 0;
|
|
+
|
|
+ cmd = ext_addr ? SPINOR_OP_EN4B : SPINOR_OP_EX4B;
|
|
+ write_enable(nor);
|
|
+ ret = nor->write_reg(nor, cmd, NULL, 0);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ cmd = 0;
|
|
+ ret = nor->write_reg(nor, SPINOR_OP_WREAR, &cmd, 1);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
+ nor->addr_width = 3 + ext_addr;
|
|
+ nor->ext_addr = ext_addr;
|
|
+ write_disable(nor);
|
|
+ return 0;
|
|
+}
|
|
+
|
|
/*
|
|
* Erase an address range on the nor chip. The address range may extend
|
|
* one or more erase sectors. Return an error is there is a problem erasing.
|
|
@@ -492,6 +535,10 @@ static int spi_nor_erase(struct mtd_info
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ ret = spi_nor_check_ext_addr(nor, addr + len);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+
|
|
/* whole-chip erase? */
|
|
if (len == mtd->size && !(nor->flags & SNOR_F_NO_OP_CHIP_ERASE)) {
|
|
unsigned long timeout;
|
|
@@ -542,6 +589,7 @@ static int spi_nor_erase(struct mtd_info
|
|
write_disable(nor);
|
|
|
|
erase_err:
|
|
+ spi_nor_check_ext_addr(nor, 0);
|
|
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_ERASE);
|
|
|
|
instr->state = ret ? MTD_ERASE_FAILED : MTD_ERASE_DONE;
|
|
@@ -834,7 +882,9 @@ static int spi_nor_lock(struct mtd_info
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ spi_nor_check_ext_addr(nor, ofs + len);
|
|
ret = nor->flash_lock(nor, ofs, len);
|
|
+ spi_nor_check_ext_addr(nor, 0);
|
|
|
|
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_UNLOCK);
|
|
return ret;
|
|
@@ -849,7 +899,9 @@ static int spi_nor_unlock(struct mtd_inf
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ spi_nor_check_ext_addr(nor, ofs + len);
|
|
ret = nor->flash_unlock(nor, ofs, len);
|
|
+ spi_nor_check_ext_addr(nor, 0);
|
|
|
|
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_LOCK);
|
|
return ret;
|
|
@@ -1151,7 +1203,7 @@ static const struct flash_info spi_nor_i
|
|
{ "w25q80", INFO(0xef5014, 0, 64 * 1024, 16, SECT_4K) },
|
|
{ "w25q80bl", INFO(0xef4014, 0, 64 * 1024, 16, SECT_4K) },
|
|
{ "w25q128", INFO(0xef4018, 0, 64 * 1024, 256, SECT_4K) },
|
|
- { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K) },
|
|
+ { "w25q256", INFO(0xef4019, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_READ_OP) },
|
|
|
|
/* Catalyst / On Semiconductor -- non-JEDEC */
|
|
{ "cat25c11", CAT25_INFO( 16, 8, 16, 1, SPI_NOR_NO_ERASE | SPI_NOR_NO_FR) },
|
|
@@ -1205,6 +1257,9 @@ static int spi_nor_read(struct mtd_info
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ if (nor->flags & SNOR_F_4B_EXT_ADDR)
|
|
+ nor->addr_width = 4;
|
|
+
|
|
while (len) {
|
|
loff_t addr = from;
|
|
|
|
@@ -1229,6 +1284,18 @@ static int spi_nor_read(struct mtd_info
|
|
ret = 0;
|
|
|
|
read_err:
|
|
+ if (nor->flags & SNOR_F_4B_EXT_ADDR) {
|
|
+ u8 val = 0;
|
|
+
|
|
+ if ((from + len) & 0xff000000) {
|
|
+ write_enable(nor);
|
|
+ nor->write_reg(nor, SPINOR_OP_WREAR, &val, 1);
|
|
+ write_disable(nor);
|
|
+ }
|
|
+
|
|
+ nor->addr_width = 3;
|
|
+ }
|
|
+
|
|
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_READ);
|
|
return ret;
|
|
}
|
|
@@ -1330,6 +1397,10 @@ static int spi_nor_write(struct mtd_info
|
|
if (ret)
|
|
return ret;
|
|
|
|
+ ret = spi_nor_check_ext_addr(nor, to + len);
|
|
+ if (ret < 0)
|
|
+ return ret;
|
|
+
|
|
for (i = 0; i < len; ) {
|
|
ssize_t written;
|
|
loff_t addr = to + i;
|
|
@@ -1377,6 +1448,7 @@ static int spi_nor_write(struct mtd_info
|
|
}
|
|
|
|
write_err:
|
|
+ spi_nor_check_ext_addr(nor, 0);
|
|
spi_nor_unlock_and_unprep(nor, SPI_NOR_OPS_WRITE);
|
|
return ret;
|
|
}
|
|
@@ -1717,8 +1789,10 @@ int spi_nor_scan(struct spi_nor *nor, co
|
|
else if (mtd->size > 0x1000000) {
|
|
/* enable 4-byte addressing if the device exceeds 16MiB */
|
|
nor->addr_width = 4;
|
|
- if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
|
|
- info->flags & SPI_NOR_4B_OPCODES)
|
|
+ if (info->flags & SPI_NOR_4B_READ_OP)
|
|
+ spi_nor_set_4byte_read(nor, info);
|
|
+ else if (JEDEC_MFR(info) == SNOR_MFR_SPANSION ||
|
|
+ info->flags & SPI_NOR_4B_OPCODES)
|
|
spi_nor_set_4byte_opcodes(nor, info);
|
|
else
|
|
set_4byte(nor, info, 1);
|
|
--- a/include/linux/mtd/spi-nor.h
|
|
+++ b/include/linux/mtd/spi-nor.h
|
|
@@ -90,6 +90,7 @@
|
|
/* Used for Macronix and Winbond flashes. */
|
|
#define SPINOR_OP_EN4B 0xb7 /* Enter 4-byte mode */
|
|
#define SPINOR_OP_EX4B 0xe9 /* Exit 4-byte mode */
|
|
+#define SPINOR_OP_WREAR 0xc5 /* Write extended address register */
|
|
|
|
/* Used for Spansion flashes only. */
|
|
#define SPINOR_OP_BRWR 0x17 /* Bank register write */
|
|
@@ -141,6 +142,7 @@ enum spi_nor_option_flags {
|
|
SNOR_F_NO_OP_CHIP_ERASE = BIT(2),
|
|
SNOR_F_S3AN_ADDR_DEFAULT = BIT(3),
|
|
SNOR_F_READY_XSR_RDY = BIT(4),
|
|
+ SNOR_F_4B_EXT_ADDR = BIT(5),
|
|
};
|
|
|
|
/**
|
|
@@ -188,6 +190,7 @@ struct spi_nor {
|
|
enum read_mode flash_read;
|
|
bool sst_write_second;
|
|
u32 flags;
|
|
+ u8 ext_addr;
|
|
u8 cmd_buf[SPI_NOR_MAX_CMD_SIZE];
|
|
|
|
int (*prepare)(struct spi_nor *nor, enum spi_nor_ops ops);
|