mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
fce21ae4cc
Right now all brcm2708 patches are extracted from the non-mainline raspberrypi/linux git tree. Many of them are hacks and/or are unneeded in LEDE. Raspberry Pi is getting better and better mainline support so it would be nice to finally start maintaining patches in a cleaner way: 1) Backport patches accepted in upstream tree 2) Start using upstream drivers 3) Pick only these patches that are needed for more complete support Handling above tasks requires grouping patches - ideally using the same prefixes as generic ones. It means we should rename existing patches to use some high prefix. This will allow e.g. use 0xx for backported code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl> Acked-by: Florian Fainelli <f.fainelli@gmail.com> Acked-by: Stijn Tintel <stijn@linux-ipv6.be>
84 lines
2.3 KiB
Diff
84 lines
2.3 KiB
Diff
From 48eea36959fb8d854b4cf1ee4284646be5a279e0 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 16 Jan 2017 14:53:12 +0000
|
|
Subject: [PATCH] BCM270X_DT: Add spi0-cs overlay
|
|
|
|
The spi0-cs overlay allows the software chip selectts to be modified
|
|
using the cs0_pin and cs1_pin parameters.
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.org>
|
|
---
|
|
arch/arm/boot/dts/overlays/Makefile | 1 +
|
|
arch/arm/boot/dts/overlays/README | 9 +++++++-
|
|
arch/arm/boot/dts/overlays/spi0-cs-overlay.dts | 29 ++++++++++++++++++++++++++
|
|
3 files changed, 38 insertions(+), 1 deletion(-)
|
|
create mode 100644 arch/arm/boot/dts/overlays/spi0-cs-overlay.dts
|
|
|
|
--- a/arch/arm/boot/dts/overlays/Makefile
|
|
+++ b/arch/arm/boot/dts/overlays/Makefile
|
|
@@ -83,6 +83,7 @@ dtbo-$(CONFIG_ARCH_BCM2835) += \
|
|
smi-nand.dtbo \
|
|
spi-gpio35-39.dtbo \
|
|
spi-rtc.dtbo \
|
|
+ spi0-cs.dtbo \
|
|
spi0-hw-cs.dtbo \
|
|
spi1-1cs.dtbo \
|
|
spi1-2cs.dtbo \
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -1138,7 +1138,7 @@ Params: <None>
|
|
|
|
|
|
Name: spi-gpio35-39
|
|
-Info: move SPI function block to GPIO 35 to 39
|
|
+Info: Move SPI function block to GPIO 35 to 39
|
|
Load: dtoverlay=spi-gpio35-39
|
|
Params: <None>
|
|
|
|
@@ -1149,6 +1149,13 @@ Load: dtoverlay=spi-rtc,<param>=<val>
|
|
Params: pcf2123 Select the PCF2123 device
|
|
|
|
|
|
+Name: spi0-cs
|
|
+Info: Allows the (software) CS pins for SPI0 to be changed
|
|
+Load: dtoverlay=spi0-cs,<param>=<val>
|
|
+Params: cs0_pin GPIO pin for CS0 (default 8)
|
|
+ cs1_pin GPIO pin for CS1 (default 7)
|
|
+
|
|
+
|
|
Name: spi0-hw-cs
|
|
Info: Re-enables hardware CS/CE (chip selects) for SPI0
|
|
Load: dtoverlay=spi0-hw-cs
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/overlays/spi0-cs-overlay.dts
|
|
@@ -0,0 +1,29 @@
|
|
+/dts-v1/;
|
|
+/plugin/;
|
|
+
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm2835", "brcm,bcm2708", "brcm,bcm2709";
|
|
+
|
|
+ fragment@0 {
|
|
+ target = <&spi0_cs_pins>;
|
|
+ frag0: __overlay__ {
|
|
+ brcm,pins = <8 7>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ fragment@1 {
|
|
+ target = <&spi0>;
|
|
+ frag1: __overlay__ {
|
|
+ cs-gpios = <&gpio 8 1>, <&gpio 7 1>;
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ __overrides__ {
|
|
+ cs0_pin = <&frag0>,"brcm,pins:0",
|
|
+ <&frag1>,"cs-gpios:4";
|
|
+ cs1_pin = <&frag0>,"brcm,pins:4",
|
|
+ <&frag1>,"cs-gpios:16";
|
|
+ };
|
|
+};
|