mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 18:47:06 +00:00
51abaf722c
It doesn't change any bevahior just cleanes up the code. Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
178 lines
5.9 KiB
Diff
178 lines
5.9 KiB
Diff
From fff3364a637796611c06f59a6f2be61685d99bfe Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Rafa=C5=82=20Mi=C5=82ecki?= <rafal@milecki.pl>
|
|
Date: Sun, 2 Apr 2017 18:55:22 +0200
|
|
Subject: [PATCH] phy: bcm-ns-usb3: split all writes into reg & val pairs
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
So far all the PHY initialization was implemented using some totally
|
|
magic values. There was some pattern there but it wasn't clear what is
|
|
it about.
|
|
|
|
Thanks to the patch submitted by Broadcom:
|
|
[PATCH 5/6] phy: Add USB3 PHY support for Broadcom NSP SoC
|
|
and the upstream "iproc-mdio" driver we now know there is a MDIO bus
|
|
underneath with PHY(s) and their registers.
|
|
|
|
It allows us to clean the driver a bit by making all these values less
|
|
magical. The next step is switching to using a proper MDIO layer.
|
|
|
|
Signed-off-by: Rafał Miłecki <rafal@milecki.pl>
|
|
Acked-by: Jon Mason <jon.mason@broadcom.com>
|
|
Signed-off-by: Kishon Vijay Abraham I <kishon@ti.com>
|
|
---
|
|
drivers/phy/phy-bcm-ns-usb3.c | 69 ++++++++++++++++++++++++++++++-------------
|
|
1 file changed, 49 insertions(+), 20 deletions(-)
|
|
|
|
--- a/drivers/phy/phy-bcm-ns-usb3.c
|
|
+++ b/drivers/phy/phy-bcm-ns-usb3.c
|
|
@@ -2,6 +2,7 @@
|
|
* Broadcom Northstar USB 3.0 PHY Driver
|
|
*
|
|
* Copyright (C) 2016 Rafał Miłecki <rafal@milecki.pl>
|
|
+ * Copyright (C) 2016 Broadcom
|
|
*
|
|
* All magic values used for initialization (and related comments) were obtained
|
|
* from Broadcom's SDK:
|
|
@@ -23,6 +24,23 @@
|
|
|
|
#define BCM_NS_USB3_MII_MNG_TIMEOUT_US 1000 /* usecs */
|
|
|
|
+#define BCM_NS_USB3_PHY_BASE_ADDR_REG 0x1f
|
|
+#define BCM_NS_USB3_PHY_PLL30_BLOCK 0x8000
|
|
+#define BCM_NS_USB3_PHY_TX_PMD_BLOCK 0x8040
|
|
+#define BCM_NS_USB3_PHY_PIPE_BLOCK 0x8060
|
|
+
|
|
+/* Registers of PLL30 block */
|
|
+#define BCM_NS_USB3_PLL_CONTROL 0x01
|
|
+#define BCM_NS_USB3_PLLA_CONTROL0 0x0a
|
|
+#define BCM_NS_USB3_PLLA_CONTROL1 0x0b
|
|
+
|
|
+/* Registers of TX PMD block */
|
|
+#define BCM_NS_USB3_TX_PMD_CONTROL1 0x01
|
|
+
|
|
+/* Registers of PIPE block */
|
|
+#define BCM_NS_USB3_LFPS_CMP 0x02
|
|
+#define BCM_NS_USB3_LFPS_DEGLITCH 0x03
|
|
+
|
|
enum bcm_ns_family {
|
|
BCM_NS_UNKNOWN,
|
|
BCM_NS_AX,
|
|
@@ -76,8 +94,10 @@ static inline int bcm_ns_usb3_mii_mng_wa
|
|
usecs_to_jiffies(BCM_NS_USB3_MII_MNG_TIMEOUT_US));
|
|
}
|
|
|
|
-static int bcm_ns_usb3_mii_mng_write32(struct bcm_ns_usb3 *usb3, u32 value)
|
|
+static int bcm_ns_usb3_mdio_phy_write(struct bcm_ns_usb3 *usb3, u16 reg,
|
|
+ u16 value)
|
|
{
|
|
+ u32 tmp = 0;
|
|
int err;
|
|
|
|
err = bcm_ns_usb3_mii_mng_wait_idle(usb3);
|
|
@@ -86,7 +106,11 @@ static int bcm_ns_usb3_mii_mng_write32(s
|
|
return err;
|
|
}
|
|
|
|
- writel(value, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
|
|
+ /* TODO: Use a proper MDIO bus layer */
|
|
+ tmp |= 0x58020000; /* Magic value for MDIO PHY write */
|
|
+ tmp |= reg << 18;
|
|
+ tmp |= value;
|
|
+ writel(tmp, usb3->ccb_mii + BCMA_CCB_MII_MNG_CMD_DATA);
|
|
|
|
return 0;
|
|
}
|
|
@@ -102,21 +126,22 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
|
|
udelay(2);
|
|
|
|
/* USB3 PLL Block */
|
|
- err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
|
|
+ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
|
|
+ BCM_NS_USB3_PHY_PLL30_BLOCK);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
/* Assert Ana_Pllseq start */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061000);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x1000);
|
|
|
|
/* Assert CML Divider ratio to 26 */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
|
|
|
|
/* Asserting PLL Reset */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x582ec000);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0xc000);
|
|
|
|
/* Deaaserting PLL Reset */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x582e8000);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL1, 0x8000);
|
|
|
|
/* Waiting MII Mgt interface idle */
|
|
bcm_ns_usb3_mii_mng_wait_idle(usb3);
|
|
@@ -125,22 +150,24 @@ static int bcm_ns_usb3_phy_init_ns_bx(st
|
|
writel(0, usb3->dmp + BCMA_RESET_CTL);
|
|
|
|
/* PLL frequency monitor enable */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x58069000);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLL_CONTROL, 0x9000);
|
|
|
|
/* PIPE Block */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8060);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
|
|
+ BCM_NS_USB3_PHY_PIPE_BLOCK);
|
|
|
|
/* CMPMAX & CMPMINTH setting */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x580af30d);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_CMP, 0xf30d);
|
|
|
|
/* DEGLITCH MIN & MAX setting */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x580e6302);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_LFPS_DEGLITCH, 0x6302);
|
|
|
|
/* TXPMD block */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
|
|
+ BCM_NS_USB3_PHY_TX_PMD_BLOCK);
|
|
|
|
/* Enabling SSC */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
|
|
|
|
/* Waiting MII Mgt interface idle */
|
|
bcm_ns_usb3_mii_mng_wait_idle(usb3);
|
|
@@ -159,22 +186,24 @@ static int bcm_ns_usb3_phy_init_ns_ax(st
|
|
udelay(2);
|
|
|
|
/* PLL30 block */
|
|
- err = bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8000);
|
|
+ err = bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
|
|
+ BCM_NS_USB3_PHY_PLL30_BLOCK);
|
|
if (err < 0)
|
|
return err;
|
|
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x582a6400);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PLLA_CONTROL0, 0x6400);
|
|
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e80e0);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG, 0x80e0);
|
|
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x580a009c);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x009c);
|
|
|
|
/* Enable SSC */
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x587e8040);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_PHY_BASE_ADDR_REG,
|
|
+ BCM_NS_USB3_PHY_TX_PMD_BLOCK);
|
|
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x580a21d3);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, 0x02, 0x21d3);
|
|
|
|
- bcm_ns_usb3_mii_mng_write32(usb3, 0x58061003);
|
|
+ bcm_ns_usb3_mdio_phy_write(usb3, BCM_NS_USB3_TX_PMD_CONTROL1, 0x1003);
|
|
|
|
/* Waiting MII Mgt interface idle */
|
|
bcm_ns_usb3_mii_mng_wait_idle(usb3);
|