mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
baad22eed3
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.9.y - Remove led1 from diag.sh for RPi3 since it causes boot issues. - Fix modules.mk typos. Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
91 lines
2.9 KiB
Diff
91 lines
2.9 KiB
Diff
From 89b466914a0d49f08d00be25556ba22497b9a284 Mon Sep 17 00:00:00 2001
|
|
From: =?UTF-8?q?Noralf=20Tr=C3=B8nnes?= <noralf@tronnes.org>
|
|
Date: Sat, 17 Sep 2016 15:07:10 +0200
|
|
Subject: [PATCH] i2c: bcm2835: Fix hang for writing messages larger than 16
|
|
bytes
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Writing messages larger than the FIFO size results in a hang, rendering
|
|
the machine unusable. This is because the RXD status flag is set on the
|
|
first interrupt which results in bcm2835_drain_rxfifo() stealing bytes
|
|
from the buffer. The controller continues to trigger interrupts waiting
|
|
for the missing bytes, but bcm2835_fill_txfifo() has none to give.
|
|
In this situation wait_for_completion_timeout() apparently is unable to
|
|
stop the madness.
|
|
|
|
The BCM2835 ARM Peripherals datasheet has this to say about the flags:
|
|
TXD: is set when the FIFO has space for at least one byte of data.
|
|
RXD: is set when the FIFO contains at least one byte of data.
|
|
TXW: is set during a write transfer and the FIFO is less than full.
|
|
RXR: is set during a read transfer and the FIFO is or more full.
|
|
|
|
Implementing the logic from the downstream i2c-bcm2708 driver solved
|
|
the hang problem.
|
|
|
|
Signed-off-by: Noralf Trønnes <noralf@tronnes.org>
|
|
Reviewed-by: Eric Anholt <eric@anholt.net>
|
|
Reviewed-by: Martin Sperl <kernel@martin.sperl.org>
|
|
---
|
|
drivers/i2c/busses/i2c-bcm2835.c | 22 ++++++++++++++--------
|
|
1 file changed, 14 insertions(+), 8 deletions(-)
|
|
|
|
--- a/drivers/i2c/busses/i2c-bcm2835.c
|
|
+++ b/drivers/i2c/busses/i2c-bcm2835.c
|
|
@@ -64,6 +64,7 @@ struct bcm2835_i2c_dev {
|
|
int irq;
|
|
struct i2c_adapter adapter;
|
|
struct completion completion;
|
|
+ struct i2c_msg *curr_msg;
|
|
u32 msg_err;
|
|
u8 *msg_buf;
|
|
size_t msg_buf_remaining;
|
|
@@ -126,14 +127,13 @@ static irqreturn_t bcm2835_i2c_isr(int t
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
- if (val & BCM2835_I2C_S_RXD) {
|
|
- bcm2835_drain_rxfifo(i2c_dev);
|
|
- if (!(val & BCM2835_I2C_S_DONE))
|
|
- return IRQ_HANDLED;
|
|
- }
|
|
-
|
|
if (val & BCM2835_I2C_S_DONE) {
|
|
- if (i2c_dev->msg_buf_remaining)
|
|
+ if (i2c_dev->curr_msg->flags & I2C_M_RD) {
|
|
+ bcm2835_drain_rxfifo(i2c_dev);
|
|
+ val = bcm2835_i2c_readl(i2c_dev, BCM2835_I2C_S);
|
|
+ }
|
|
+
|
|
+ if ((val & BCM2835_I2C_S_RXD) || i2c_dev->msg_buf_remaining)
|
|
i2c_dev->msg_err = BCM2835_I2C_S_LEN;
|
|
else
|
|
i2c_dev->msg_err = 0;
|
|
@@ -141,11 +141,16 @@ static irqreturn_t bcm2835_i2c_isr(int t
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
- if (val & BCM2835_I2C_S_TXD) {
|
|
+ if (val & BCM2835_I2C_S_TXW) {
|
|
bcm2835_fill_txfifo(i2c_dev);
|
|
return IRQ_HANDLED;
|
|
}
|
|
|
|
+ if (val & BCM2835_I2C_S_RXR) {
|
|
+ bcm2835_drain_rxfifo(i2c_dev);
|
|
+ return IRQ_HANDLED;
|
|
+ }
|
|
+
|
|
return IRQ_NONE;
|
|
}
|
|
|
|
@@ -155,6 +160,7 @@ static int bcm2835_i2c_xfer_msg(struct b
|
|
u32 c;
|
|
unsigned long time_left;
|
|
|
|
+ i2c_dev->curr_msg = msg;
|
|
i2c_dev->msg_buf = msg->buf;
|
|
i2c_dev->msg_buf_remaining = msg->len;
|
|
reinit_completion(&i2c_dev->completion);
|