openwrt/target/linux/ar71xx/patches-4.4/930-chipidea-pullup.patch
Stijn Segers 20996edd68 Kernel: bump to 4.4.44
Bump kernel to 4.4.44. Compile-tested on ar71xx, ramips/mt7621 and x86/64.

.44 has been run-tested on the 17.01 branch here on ar71xx and mt7621.

Signed-off-by: Stijn Segers <francesco.borromini@inventati.org>
2017-01-27 11:18:27 +01:00

73 lines
2.2 KiB
Diff

--- a/drivers/usb/chipidea/ci.h
+++ b/drivers/usb/chipidea/ci.h
@@ -199,6 +199,7 @@ struct hw_bank {
* @in_lpm: if the core in low power mode
* @wakeup_int: if wakeup interrupt occur
* @rev: The revision number for controller
+ * @dp_always_pullup: keep dp always pullup at device mode
*/
struct ci_hdrc {
struct device *dev;
@@ -248,6 +249,7 @@ struct ci_hdrc {
bool in_lpm;
bool wakeup_int;
enum ci_revision rev;
+ bool dp_always_pullup;
};
static inline struct ci_role_driver *ci_role(struct ci_hdrc *ci)
--- a/drivers/usb/chipidea/core.c
+++ b/drivers/usb/chipidea/core.c
@@ -883,7 +883,7 @@ static inline void ci_role_destroy(struc
{
ci_hdrc_gadget_destroy(ci);
ci_hdrc_host_destroy(ci);
- if (ci->is_otg)
+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET])
ci_hdrc_otg_destroy(ci);
}
@@ -934,6 +934,9 @@ static int ci_hdrc_probe(struct platform
ci->supports_runtime_pm = !!(ci->platdata->flags &
CI_HDRC_SUPPORTS_RUNTIME_PM);
+ ci->dp_always_pullup = !!(ci->platdata->flags &
+ CI_HDRC_DP_ALWAYS_PULLUP);
+
ret = hw_device_init(ci, base);
if (ret < 0) {
dev_err(dev, "can't initialize hardware\n");
@@ -999,7 +1002,7 @@ static int ci_hdrc_probe(struct platform
goto deinit_phy;
}
- if (ci->is_otg && ci->roles[CI_ROLE_GADGET]) {
+ if (!ci->dp_always_pullup && ci->roles[CI_ROLE_GADGET]) {
ret = ci_hdrc_otg_init(ci);
if (ret) {
dev_err(dev, "init otg fails, ret = %d\n", ret);
--- a/drivers/usb/chipidea/otg.c
+++ b/drivers/usb/chipidea/otg.c
@@ -95,8 +95,10 @@ enum ci_role ci_otg_role(struct ci_hdrc
void ci_handle_vbus_change(struct ci_hdrc *ci)
{
- if (!ci->is_otg)
+ if (ci->dp_always_pullup) {
+ usb_gadget_vbus_connect(&ci->gadget);
return;
+ }
if (hw_read_otgsc(ci, OTGSC_BSV))
usb_gadget_vbus_connect(&ci->gadget);
--- a/include/linux/usb/chipidea.h
+++ b/include/linux/usb/chipidea.h
@@ -55,6 +55,7 @@ struct ci_hdrc_platform_data {
#define CI_HDRC_OVERRIDE_AHB_BURST BIT(9)
#define CI_HDRC_OVERRIDE_TX_BURST BIT(10)
#define CI_HDRC_OVERRIDE_RX_BURST BIT(11)
+#define CI_HDRC_DP_ALWAYS_PULLUP BIT(12)
enum usb_dr_mode dr_mode;
#define CI_HDRC_CONTROLLER_RESET_EVENT 0
#define CI_HDRC_CONTROLLER_STOPPED_EVENT 1