mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-24 07:46:48 +00:00
76d079204d
Changelogs: * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.12 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.13 * https://www.kernel.org/pub/linux/kernel/v3.x/ChangeLog-3.18.14 Build tested on brcm63xx and ipq806x, runtested on brcm63xx. Signed-off-by: Jonas Gorski <jogo@openwrt.org> SVN-Revision: 45711
244 lines
7.9 KiB
Diff
244 lines
7.9 KiB
Diff
--- a/arch/arm/mach-gemini/time.c
|
|
+++ b/arch/arm/mach-gemini/time.c
|
|
@@ -15,15 +15,18 @@
|
|
#include <asm/mach/time.h>
|
|
#include <linux/clockchips.h>
|
|
#include <linux/clocksource.h>
|
|
+#include <linux/sched_clock.h>
|
|
|
|
/*
|
|
* Register definitions for the timers
|
|
*/
|
|
-#define TIMER_COUNT(BASE_ADDR) (BASE_ADDR + 0x00)
|
|
-#define TIMER_LOAD(BASE_ADDR) (BASE_ADDR + 0x04)
|
|
-#define TIMER_MATCH1(BASE_ADDR) (BASE_ADDR + 0x08)
|
|
-#define TIMER_MATCH2(BASE_ADDR) (BASE_ADDR + 0x0C)
|
|
-#define TIMER_CR(BASE_ADDR) (BASE_ADDR + 0x30)
|
|
+#define TIMER_COUNT(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x00)
|
|
+#define TIMER_LOAD(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x04)
|
|
+#define TIMER_MATCH1(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x08)
|
|
+#define TIMER_MATCH2(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x0C)
|
|
+#define TIMER_CR(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x30)
|
|
+#define TIMER_INTR_STATE(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x34)
|
|
+#define TIMER_INTR_MASK(BASE_ADDR) (IO_ADDRESS(BASE_ADDR) + 0x38)
|
|
|
|
#define TIMER_1_CR_ENABLE (1 << 0)
|
|
#define TIMER_1_CR_CLOCK (1 << 1)
|
|
@@ -34,27 +37,38 @@
|
|
#define TIMER_3_CR_ENABLE (1 << 6)
|
|
#define TIMER_3_CR_CLOCK (1 << 7)
|
|
#define TIMER_3_CR_INT (1 << 8)
|
|
+#define TIMER_1_CR_UPDOWN (1 << 9)
|
|
+#define TIMER_2_CR_UPDOWN (1 << 10)
|
|
+#define TIMER_3_CR_UPDOWN (1 << 11)
|
|
+
|
|
+#define TIMER_1_INT_MATCH1 (1 << 0)
|
|
+#define TIMER_1_INT_MATCH2 (1 << 1)
|
|
+#define TIMER_1_INT_OVERFLOW (1 << 2)
|
|
+#define TIMER_2_INT_MATCH1 (1 << 3)
|
|
+#define TIMER_2_INT_MATCH2 (1 << 4)
|
|
+#define TIMER_2_INT_OVERFLOW (1 << 5)
|
|
+#define TIMER_3_INT_MATCH1 (1 << 6)
|
|
+#define TIMER_3_INT_MATCH2 (1 << 7)
|
|
+#define TIMER_3_INT_OVERFLOW (1 << 8)
|
|
+#define TIMER_INT_ALL_MASK 0x1ff
|
|
|
|
static unsigned int tick_rate;
|
|
|
|
+static u64 notrace gemini_read_sched_clock(void)
|
|
+{
|
|
+ return readl(TIMER_COUNT(GEMINI_TIMER3_BASE));
|
|
+}
|
|
+
|
|
static int gemini_timer_set_next_event(unsigned long cycles,
|
|
struct clock_event_device *evt)
|
|
{
|
|
u32 cr;
|
|
|
|
- cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
-
|
|
- /* This may be overdoing it, feel free to test without this */
|
|
- cr &= ~TIMER_2_CR_ENABLE;
|
|
- cr &= ~TIMER_2_CR_INT;
|
|
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
-
|
|
- /* Set next event */
|
|
- writel(cycles, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
|
- writel(cycles, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
|
- cr |= TIMER_2_CR_ENABLE;
|
|
- cr |= TIMER_2_CR_INT;
|
|
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
+ /* Setup the match register */
|
|
+ cr = readl(TIMER_COUNT(GEMINI_TIMER1_BASE));
|
|
+ writel(cr + cycles, TIMER_MATCH1(GEMINI_TIMER1_BASE));
|
|
+ if (readl(TIMER_COUNT(GEMINI_TIMER1_BASE)) - cr > cycles)
|
|
+ return -ETIME;
|
|
|
|
return 0;
|
|
}
|
|
@@ -66,48 +80,68 @@ static void gemini_timer_set_mode(enum c
|
|
u32 cr;
|
|
|
|
switch (mode) {
|
|
- case CLOCK_EVT_MODE_PERIODIC:
|
|
- /* Start the timer */
|
|
- writel(period,
|
|
- TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
|
- writel(period,
|
|
- TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER2_BASE)));
|
|
- cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
- cr |= TIMER_2_CR_ENABLE;
|
|
- cr |= TIMER_2_CR_INT;
|
|
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
+ case CLOCK_EVT_MODE_PERIODIC:
|
|
+ /* Stop timer and interrupt. */
|
|
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
|
+ cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
|
|
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
|
+
|
|
+ /* Setup timer to fire at 1/HZ intervals. */
|
|
+ cr = 0xffffffff - (period - 1);
|
|
+ writel(cr, TIMER_COUNT(GEMINI_TIMER1_BASE));
|
|
+ writel(cr, TIMER_LOAD(GEMINI_TIMER1_BASE));
|
|
+
|
|
+ /* enable interrupt on overflaw */
|
|
+ cr = readl(TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
|
+ cr &= ~(TIMER_1_INT_MATCH1 | TIMER_1_INT_MATCH2);
|
|
+ cr |= TIMER_1_INT_OVERFLOW;
|
|
+ writel(cr, TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
|
+
|
|
+ /* start the timer */
|
|
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
|
+ cr |= TIMER_1_CR_ENABLE | TIMER_1_CR_INT;
|
|
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
|
break;
|
|
+
|
|
case CLOCK_EVT_MODE_ONESHOT:
|
|
case CLOCK_EVT_MODE_UNUSED:
|
|
- case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ case CLOCK_EVT_MODE_SHUTDOWN:
|
|
+ /* Stop timer and interrupt. */
|
|
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
|
+ cr &= ~(TIMER_1_CR_ENABLE | TIMER_1_CR_INT);
|
|
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
|
+
|
|
+ /* Setup counter start from 0 */
|
|
+ writel(0, TIMER_COUNT(GEMINI_TIMER1_BASE));
|
|
+ writel(0, TIMER_LOAD(GEMINI_TIMER1_BASE));
|
|
+
|
|
+ /* enable interrupt */
|
|
+ cr = readl(TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
|
+ cr &= ~(TIMER_1_INT_OVERFLOW | TIMER_1_INT_MATCH2);
|
|
+ cr |= TIMER_1_INT_MATCH1;
|
|
+ writel(cr, TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
|
+
|
|
+ /* start the timer */
|
|
+ cr = readl(TIMER_CR(GEMINI_TIMER_BASE));
|
|
+ cr |= TIMER_1_CR_ENABLE;
|
|
+ writel(cr, TIMER_CR(GEMINI_TIMER_BASE));
|
|
+ break;
|
|
+
|
|
case CLOCK_EVT_MODE_RESUME:
|
|
- /*
|
|
- * Disable also for oneshot: the set_next() call will
|
|
- * arm the timer instead.
|
|
- */
|
|
- cr = readl(TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
- cr &= ~TIMER_2_CR_ENABLE;
|
|
- cr &= ~TIMER_2_CR_INT;
|
|
- writel(cr, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
break;
|
|
- default:
|
|
- break;
|
|
}
|
|
}
|
|
|
|
-/* Use TIMER2 as clock event */
|
|
static struct clock_event_device gemini_clockevent = {
|
|
- .name = "TIMER2",
|
|
- .rating = 300, /* Reasonably fast and accurate clock event */
|
|
- .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
|
- .set_next_event = gemini_timer_set_next_event,
|
|
- .set_mode = gemini_timer_set_mode,
|
|
+ .name = "gemini_timer_1",
|
|
+ .features = CLOCK_EVT_FEAT_PERIODIC | CLOCK_EVT_FEAT_ONESHOT,
|
|
+ .shift = 32,
|
|
+ .rating = 300,
|
|
+ .set_next_event = gemini_timer_set_next_event,
|
|
+ .set_mode = gemini_timer_set_mode,
|
|
};
|
|
|
|
-/*
|
|
- * IRQ handler for the timer
|
|
- */
|
|
-static irqreturn_t gemini_timer_interrupt(int irq, void *dev_id)
|
|
+static irqreturn_t gemini_timer_intr(int irq, void *dev_id)
|
|
{
|
|
struct clock_event_device *evt = &gemini_clockevent;
|
|
|
|
@@ -116,14 +150,11 @@ static irqreturn_t gemini_timer_interrup
|
|
}
|
|
|
|
static struct irqaction gemini_timer_irq = {
|
|
- .name = "Gemini Timer Tick",
|
|
- .flags = IRQF_TIMER,
|
|
- .handler = gemini_timer_interrupt,
|
|
+ .name = "gemini timer 1",
|
|
+ .flags = IRQF_DISABLED | IRQF_TIMER,
|
|
+ .handler = gemini_timer_intr,
|
|
};
|
|
|
|
-/*
|
|
- * Set up timer interrupt, and return the current time in seconds.
|
|
- */
|
|
void __init gemini_timer_init(void)
|
|
{
|
|
u32 reg_v;
|
|
@@ -151,20 +182,35 @@ void __init gemini_timer_init(void)
|
|
}
|
|
|
|
/*
|
|
- * Make irqs happen for the system timer
|
|
+ * Reset the interrupt mask and status
|
|
*/
|
|
- setup_irq(IRQ_TIMER2, &gemini_timer_irq);
|
|
+ writel(TIMER_INT_ALL_MASK, TIMER_INTR_MASK(GEMINI_TIMER_BASE));
|
|
+ writel(0, TIMER_INTR_STATE(GEMINI_TIMER_BASE));
|
|
+ writel(TIMER_1_CR_UPDOWN | TIMER_3_CR_ENABLE | TIMER_3_CR_UPDOWN,
|
|
+ TIMER_CR(GEMINI_TIMER_BASE));
|
|
|
|
- /* Enable and use TIMER1 as clock source */
|
|
- writel(0xffffffff, TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)));
|
|
- writel(0xffffffff, TIMER_LOAD(IO_ADDRESS(GEMINI_TIMER1_BASE)));
|
|
- writel(TIMER_1_CR_ENABLE, TIMER_CR(IO_ADDRESS(GEMINI_TIMER_BASE)));
|
|
- if (clocksource_mmio_init(TIMER_COUNT(IO_ADDRESS(GEMINI_TIMER1_BASE)),
|
|
- "TIMER1", tick_rate, 300, 32,
|
|
- clocksource_mmio_readl_up))
|
|
- pr_err("timer: failed to initialize gemini clock source\n");
|
|
+ /*
|
|
+ * Setup free-running clocksource timer (interrupts
|
|
+ * disabled.)
|
|
+ */
|
|
+ writel(0, TIMER_COUNT(GEMINI_TIMER3_BASE));
|
|
+ writel(0, TIMER_LOAD(GEMINI_TIMER3_BASE));
|
|
+ writel(0, TIMER_MATCH1(GEMINI_TIMER3_BASE));
|
|
+ writel(0, TIMER_MATCH2(GEMINI_TIMER3_BASE));
|
|
+ clocksource_mmio_init(TIMER_COUNT(GEMINI_TIMER3_BASE),
|
|
+ "gemini_clocksource", tick_rate,
|
|
+ 300, 32, clocksource_mmio_readl_up);
|
|
+ sched_clock_register(gemini_read_sched_clock, 32, tick_rate);
|
|
|
|
- /* Configure and register the clockevent */
|
|
+ /*
|
|
+ * Setup clockevent timer (interrupt-driven.)
|
|
+ */
|
|
+ writel(0, TIMER_COUNT(GEMINI_TIMER1_BASE));
|
|
+ writel(0, TIMER_LOAD(GEMINI_TIMER1_BASE));
|
|
+ writel(0, TIMER_MATCH1(GEMINI_TIMER1_BASE));
|
|
+ writel(0, TIMER_MATCH2(GEMINI_TIMER1_BASE));
|
|
+ setup_irq(IRQ_TIMER1, &gemini_timer_irq);
|
|
+ gemini_clockevent.cpumask = cpumask_of(0);
|
|
clockevents_config_and_register(&gemini_clockevent, tick_rate,
|
|
1, 0xffffffff);
|
|
}
|