openwrt/target/linux/mediatek/patches-6.6/733-01-net-phy-mediatek-Re-organize-MediaTek-ethernet-phy-d.patch
Daniel Golle 7d256aff7b mediatek: update MediaTek PHY patchset
The previous iteration of MediaTek's PHY patches caused various weird bugs.
Drop culprit patch 733-10-net-phy-mediatek-Extend-1G-TX-RX-link-pulse-time.patch
and use the most recent iteration of the patchset which has been posted to the
netdev mailing list.

Link: https://patchwork.kernel.org/project/netdevbpf/list/?series=895513&state=*
Fixes: #16448
Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2024-10-09 01:37:02 +01:00

3515 lines
106 KiB
Diff

From 656f5fdeb6ee6fa95c28cab3b535e2e09ef59c57 Mon Sep 17 00:00:00 2001
From: "SkyLake.Huang" <skylake.huang@mediatek.com>
Date: Fri, 4 Oct 2024 18:24:05 +0800
Subject: [PATCH 1/9] net: phy: mediatek: Re-organize MediaTek ethernet phy
drivers
Re-organize MediaTek ethernet phy driver files and get ready to integrate
some common functions (and add new 2.5G phy driver).
mtk-ge.c: MT7530 Gphy on MT7621 & MT7531 Gphy
mtk-ge-soc.c: Built-in Gphy on MT7981 & Built-in switch Gphy on MT7988
(mtk-2p5ge.c: Planned for built-in 2.5G phy on MT7988
--> in another patchset)
Signed-off-by: SkyLake.Huang <skylake.huang@mediatek.com>
---
drivers/net/phy/Kconfig | 17 +-------------
drivers/net/phy/Makefile | 3 +--
drivers/net/phy/mediatek/Kconfig | 22 +++++++++++++++++++
drivers/net/phy/mediatek/Makefile | 3 +++
.../mtk-ge-soc.c} | 0
.../phy/{mediatek-ge.c => mediatek/mtk-ge.c} | 0
6 files changed, 27 insertions(+), 18 deletions(-)
create mode 100644 drivers/net/phy/mediatek/Kconfig
create mode 100644 drivers/net/phy/mediatek/Makefile
rename drivers/net/phy/{mediatek-ge-soc.c => mediatek/mtk-ge-soc.c} (100%)
rename drivers/net/phy/{mediatek-ge.c => mediatek/mtk-ge.c} (100%)
--- a/drivers/net/phy/Kconfig
+++ b/drivers/net/phy/Kconfig
@@ -313,22 +313,7 @@ config MAXLINEAR_GPHY
Support for the Maxlinear GPY115, GPY211, GPY212, GPY215,
GPY241, GPY245 PHYs.
-config MEDIATEK_GE_PHY
- tristate "MediaTek Gigabit Ethernet PHYs"
- help
- Supports the MediaTek Gigabit Ethernet PHYs.
-
-config MEDIATEK_GE_SOC_PHY
- tristate "MediaTek SoC Ethernet PHYs"
- depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
- depends on NVMEM_MTK_EFUSE
- help
- Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
-
- Include support for built-in Ethernet PHYs which are present in
- the MT7981 and MT7988 SoCs. These PHYs need calibration data
- present in the SoCs efuse and will dynamically calibrate VCM
- (common-mode voltage) during startup.
+source "drivers/net/phy/mediatek/Kconfig"
config MICREL_PHY
tristate "Micrel PHYs"
--- a/drivers/net/phy/Makefile
+++ b/drivers/net/phy/Makefile
@@ -82,8 +82,7 @@ obj-$(CONFIG_MARVELL_PHY) += marvell.o
obj-$(CONFIG_MARVELL_88Q2XXX_PHY) += marvell-88q2xxx.o
obj-$(CONFIG_MARVELL_88X2222_PHY) += marvell-88x2222.o
obj-$(CONFIG_MAXLINEAR_GPHY) += mxl-gpy.o
-obj-$(CONFIG_MEDIATEK_GE_PHY) += mediatek-ge.o
-obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mediatek-ge-soc.o
+obj-y += mediatek/
obj-$(CONFIG_MESON_GXL_PHY) += meson-gxl.o
obj-$(CONFIG_MICREL_KS8995MA) += spi_ks8995.o
obj-$(CONFIG_MICREL_PHY) += micrel.o
--- /dev/null
+++ b/drivers/net/phy/mediatek/Kconfig
@@ -0,0 +1,22 @@
+# SPDX-License-Identifier: GPL-2.0-only
+config MEDIATEK_GE_PHY
+ tristate "MediaTek Gigabit Ethernet PHYs"
+ help
+ Supports the MediaTek non-built-in Gigabit Ethernet PHYs.
+
+ Non-built-in Gigabit Ethernet PHYs include mt7530/mt7531.
+ You may find mt7530 inside mt7621. This driver shares some
+ common operations with MediaTek SoC built-in Gigabit
+ Ethernet PHYs.
+
+config MEDIATEK_GE_SOC_PHY
+ tristate "MediaTek SoC Ethernet PHYs"
+ depends on (ARM64 && ARCH_MEDIATEK) || COMPILE_TEST
+ select NVMEM_MTK_EFUSE
+ help
+ Supports MediaTek SoC built-in Gigabit Ethernet PHYs.
+
+ Include support for built-in Ethernet PHYs which are present in
+ the MT7981 and MT7988 SoCs. These PHYs need calibration data
+ present in the SoCs efuse and will dynamically calibrate VCM
+ (common-mode voltage) during startup.
--- /dev/null
+++ b/drivers/net/phy/mediatek/Makefile
@@ -0,0 +1,3 @@
+# SPDX-License-Identifier: GPL-2.0
+obj-$(CONFIG_MEDIATEK_GE_PHY) += mtk-ge.o
+obj-$(CONFIG_MEDIATEK_GE_SOC_PHY) += mtk-ge-soc.o
--- a/drivers/net/phy/mediatek-ge-soc.c
+++ /dev/null
@@ -1,1555 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-#include <linux/bitfield.h>
-#include <linux/bitmap.h>
-#include <linux/mfd/syscon.h>
-#include <linux/module.h>
-#include <linux/nvmem-consumer.h>
-#include <linux/pinctrl/consumer.h>
-#include <linux/phy.h>
-#include <linux/regmap.h>
-
-#define MTK_GPHY_ID_MT7981 0x03a29461
-#define MTK_GPHY_ID_MT7988 0x03a29481
-
-#define MTK_EXT_PAGE_ACCESS 0x1f
-#define MTK_PHY_PAGE_STANDARD 0x0000
-#define MTK_PHY_PAGE_EXTENDED_3 0x0003
-
-#define MTK_PHY_LPI_REG_14 0x14
-#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
-
-#define MTK_PHY_LPI_REG_1c 0x1c
-#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
-
-#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
-
-#define ANALOG_INTERNAL_OPERATION_MAX_US 20
-#define TXRESERVE_MIN 0
-#define TXRESERVE_MAX 7
-
-#define MTK_PHY_ANARG_RG 0x10
-#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8)
-
-/* Registers on MDIO_MMD_VEND1 */
-#define MTK_PHY_TXVLD_DA_RG 0x12
-#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10)
-#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16
-#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10)
-#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17
-#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18
-#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19
-#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20
-#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21
-#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0)
-
-#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22
-#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8)
-#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0)
-
-#define MTK_PHY_RXADC_CTRL_RG7 0xc6
-#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
-
-#define MTK_PHY_RXADC_CTRL_RG9 0xc8
-#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12)
-#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8)
-#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4)
-#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0)
-
-#define MTK_PHY_LDO_OUTPUT_V 0xd7
-
-#define MTK_PHY_RG_ANA_CAL_RG0 0xdb
-#define MTK_PHY_RG_CAL_CKINV BIT(12)
-#define MTK_PHY_RG_ANA_CALEN BIT(8)
-#define MTK_PHY_RG_ZCALEN_A BIT(0)
-
-#define MTK_PHY_RG_ANA_CAL_RG1 0xdc
-#define MTK_PHY_RG_ZCALEN_B BIT(12)
-#define MTK_PHY_RG_ZCALEN_C BIT(8)
-#define MTK_PHY_RG_ZCALEN_D BIT(4)
-#define MTK_PHY_RG_TXVOS_CALEN BIT(0)
-
-#define MTK_PHY_RG_ANA_CAL_RG5 0xe0
-#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8)
-
-#define MTK_PHY_RG_TX_FILTER 0xfe
-
-#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120
-#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8)
-#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0)
-
-#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122
-#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0)
-
-#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144
-#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5)
-
-#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172
-#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8)
-#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0)
-
-#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173
-#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8)
-#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0)
-
-#define MTK_PHY_RG_AD_CAL_COMP 0x17a
-#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8)
-
-#define MTK_PHY_RG_AD_CAL_CLK 0x17b
-#define MTK_PHY_DA_CAL_CLK BIT(0)
-
-#define MTK_PHY_RG_AD_CALIN 0x17c
-#define MTK_PHY_DA_CALIN_FLAG BIT(0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d
-#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e
-#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f
-#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180
-#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181
-#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182
-#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183
-#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184
-#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0)
-
-#define MTK_PHY_RG_DEV1E_REG19b 0x19b
-#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8)
-
-#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a
-#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b
-#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c
-#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d
-#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e
-#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f
-#define MTK_PHY_RG_LP_IIR2_K4_L 0x230
-#define MTK_PHY_RG_LP_IIR2_K4_U 0x231
-#define MTK_PHY_RG_LP_IIR2_K5_L 0x232
-#define MTK_PHY_RG_LP_IIR2_K5_U 0x233
-
-#define MTK_PHY_RG_DEV1E_REG234 0x234
-#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0)
-#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4)
-#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12)
-
-#define MTK_PHY_RG_LPF_CNT_VAL 0x235
-
-#define MTK_PHY_RG_DEV1E_REG238 0x238
-#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0)
-#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12)
-
-#define MTK_PHY_RG_DEV1E_REG239 0x239
-#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0)
-#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12)
-
-#define MTK_PHY_RG_DEV1E_REG27C 0x27c
-#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8)
-#define MTK_PHY_RG_DEV1E_REG27D 0x27d
-#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0)
-
-#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7
-#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0)
-#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8)
-
-#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1
-#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0)
-#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8)
-#define MTK_PHY_LPI_TR_READY BIT(9)
-#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10)
-
-#define MTK_PHY_RG_DEV1E_REG323 0x323
-#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0)
-#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4)
-
-#define MTK_PHY_RG_DEV1E_REG324 0x324
-#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0)
-#define MTK_PHY_SMI_DET_MAX_EN BIT(8)
-
-#define MTK_PHY_RG_DEV1E_REG326 0x326
-#define MTK_PHY_LPI_MODE_SD_ON BIT(0)
-#define MTK_PHY_RESET_RANDUPD_CNT BIT(1)
-#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2)
-#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4)
-#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5)
-
-#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502
-#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503
-
-#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d
-#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e
-#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
-#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
-
-/* Registers on MDIO_MMD_VEND2 */
-#define MTK_PHY_LED0_ON_CTRL 0x24
-#define MTK_PHY_LED1_ON_CTRL 0x26
-#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
-#define MTK_PHY_LED_ON_LINK1000 BIT(0)
-#define MTK_PHY_LED_ON_LINK100 BIT(1)
-#define MTK_PHY_LED_ON_LINK10 BIT(2)
-#define MTK_PHY_LED_ON_LINK (MTK_PHY_LED_ON_LINK10 |\
- MTK_PHY_LED_ON_LINK100 |\
- MTK_PHY_LED_ON_LINK1000)
-#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
-#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
-#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
-#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
-#define MTK_PHY_LED_ON_POLARITY BIT(14)
-#define MTK_PHY_LED_ON_ENABLE BIT(15)
-
-#define MTK_PHY_LED0_BLINK_CTRL 0x25
-#define MTK_PHY_LED1_BLINK_CTRL 0x27
-#define MTK_PHY_LED_BLINK_1000TX BIT(0)
-#define MTK_PHY_LED_BLINK_1000RX BIT(1)
-#define MTK_PHY_LED_BLINK_100TX BIT(2)
-#define MTK_PHY_LED_BLINK_100RX BIT(3)
-#define MTK_PHY_LED_BLINK_10TX BIT(4)
-#define MTK_PHY_LED_BLINK_10RX BIT(5)
-#define MTK_PHY_LED_BLINK_RX (MTK_PHY_LED_BLINK_10RX |\
- MTK_PHY_LED_BLINK_100RX |\
- MTK_PHY_LED_BLINK_1000RX)
-#define MTK_PHY_LED_BLINK_TX (MTK_PHY_LED_BLINK_10TX |\
- MTK_PHY_LED_BLINK_100TX |\
- MTK_PHY_LED_BLINK_1000TX)
-#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
-#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
-#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
-#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
-
-#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1)
-
-#define MTK_PHY_RG_BG_RASEL 0x115
-#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
-
-/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */
-#define RG_GPIO_MISC_TPBANK0 0x6f0
-#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8)
-
-/* These macro privides efuse parsing for internal phy. */
-#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
-#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
-#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0))
-#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0))
-#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0))
-
-#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0))
-#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0))
-#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0))
-#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0))
-#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0))
-
-#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0))
-#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0))
-
-#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0))
-#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0))
-
-enum {
- NO_PAIR,
- PAIR_A,
- PAIR_B,
- PAIR_C,
- PAIR_D,
-};
-
-enum calibration_mode {
- EFUSE_K,
- SW_K
-};
-
-enum CAL_ITEM {
- REXT,
- TX_OFFSET,
- TX_AMP,
- TX_R50,
- TX_VCM
-};
-
-enum CAL_MODE {
- EFUSE_M,
- SW_M
-};
-
-#define MTK_PHY_LED_STATE_FORCE_ON 0
-#define MTK_PHY_LED_STATE_FORCE_BLINK 1
-#define MTK_PHY_LED_STATE_NETDEV 2
-
-struct mtk_socphy_priv {
- unsigned long led_state;
-};
-
-struct mtk_socphy_shared {
- u32 boottrap;
- struct mtk_socphy_priv priv[4];
-};
-
-static int mtk_socphy_read_page(struct phy_device *phydev)
-{
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-}
-
-static int mtk_socphy_write_page(struct phy_device *phydev, int page)
-{
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-}
-
-/* One calibration cycle consists of:
- * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
- * until AD_CAL_COMP is ready to output calibration result.
- * 2.Wait until DA_CAL_CLK is available.
- * 3.Fetch AD_CAL_COMP_OUT.
- */
-static int cal_cycle(struct phy_device *phydev, int devad,
- u32 regnum, u16 mask, u16 cal_val)
-{
- int reg_val;
- int ret;
-
- phy_modify_mmd(phydev, devad, regnum,
- mask, cal_val);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
- MTK_PHY_DA_CALIN_FLAG);
-
- ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_AD_CAL_CLK, reg_val,
- reg_val & MTK_PHY_DA_CAL_CLK, 500,
- ANALOG_INTERNAL_OPERATION_MAX_US, false);
- if (ret) {
- phydev_err(phydev, "Calibration cycle timeout\n");
- return ret;
- }
-
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
- MTK_PHY_DA_CALIN_FLAG);
- ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
- MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
- phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
-
- return ret;
-}
-
-static int rext_fill_result(struct phy_device *phydev, u16 *buf)
-{
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
- MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
- MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
-
- return 0;
-}
-
-static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
-{
- u16 rext_cal_val[2];
-
- rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
- rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
- rext_fill_result(phydev, rext_cal_val);
-
- return 0;
-}
-
-static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
-{
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
- MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
- MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
- MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
- MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
-
- return 0;
-}
-
-static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
-{
- u16 tx_offset_cal_val[4];
-
- tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
- tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
- tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
- tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
-
- tx_offset_fill_result(phydev, tx_offset_cal_val);
-
- return 0;
-}
-
-static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
-{
- int i;
- int bias[16] = {};
- const int vals_9461[16] = { 7, 1, 4, 7,
- 7, 1, 4, 7,
- 7, 1, 4, 7,
- 7, 1, 4, 7 };
- const int vals_9481[16] = { 10, 6, 6, 10,
- 10, 6, 6, 10,
- 10, 6, 6, 10,
- 10, 6, 6, 10 };
- switch (phydev->drv->phy_id) {
- case MTK_GPHY_ID_MT7981:
- /* We add some calibration to efuse values
- * due to board level influence.
- * GBE: +7, TBT: +1, HBT: +4, TST: +7
- */
- memcpy(bias, (const void *)vals_9461, sizeof(bias));
- break;
- case MTK_GPHY_ID_MT7988:
- memcpy(bias, (const void *)vals_9481, sizeof(bias));
- break;
- }
-
- /* Prevent overflow */
- for (i = 0; i < 12; i++) {
- if (buf[i >> 2] + bias[i] > 63) {
- buf[i >> 2] = 63;
- bias[i] = 0;
- }
- }
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
- MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
- MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
- MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
- MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
- MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
- MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
- MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
- MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
- MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
- MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
- MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
- MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
- MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
- MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
- MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
- MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
-
- return 0;
-}
-
-static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
-{
- u16 tx_amp_cal_val[4];
-
- tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
- tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
- tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
- tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
- tx_amp_fill_result(phydev, tx_amp_cal_val);
-
- return 0;
-}
-
-static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
- u8 txg_calen_x)
-{
- int bias = 0;
- u16 reg, val;
-
- if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
- bias = -1;
-
- val = clamp_val(bias + tx_r50_cal_val, 0, 63);
-
- switch (txg_calen_x) {
- case PAIR_A:
- reg = MTK_PHY_DA_TX_R50_PAIR_A;
- break;
- case PAIR_B:
- reg = MTK_PHY_DA_TX_R50_PAIR_B;
- break;
- case PAIR_C:
- reg = MTK_PHY_DA_TX_R50_PAIR_C;
- break;
- case PAIR_D:
- reg = MTK_PHY_DA_TX_R50_PAIR_D;
- break;
- default:
- return -EINVAL;
- }
-
- phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
-
- return 0;
-}
-
-static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
- u8 txg_calen_x)
-{
- u16 tx_r50_cal_val;
-
- switch (txg_calen_x) {
- case PAIR_A:
- tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
- break;
- case PAIR_B:
- tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
- break;
- case PAIR_C:
- tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
- break;
- case PAIR_D:
- tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
- break;
- default:
- return -EINVAL;
- }
- tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
-
- return 0;
-}
-
-static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
-{
- u8 lower_idx, upper_idx, txreserve_val;
- u8 lower_ret, upper_ret;
- int ret;
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ANA_CALEN);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_CAL_CKINV);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_TXVOS_CALEN);
-
- switch (rg_txreserve_x) {
- case PAIR_A:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_A,
- MTK_PHY_DASN_DAC_IN0_A_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_A,
- MTK_PHY_DASN_DAC_IN1_A_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ZCALEN_A);
- break;
- case PAIR_B:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_B,
- MTK_PHY_DASN_DAC_IN0_B_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_B,
- MTK_PHY_DASN_DAC_IN1_B_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_B);
- break;
- case PAIR_C:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_C,
- MTK_PHY_DASN_DAC_IN0_C_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_C,
- MTK_PHY_DASN_DAC_IN1_C_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_C);
- break;
- case PAIR_D:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN0_D,
- MTK_PHY_DASN_DAC_IN0_D_MASK);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DASN_DAC_IN1_D,
- MTK_PHY_DASN_DAC_IN1_D_MASK);
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_D);
- break;
- default:
- ret = -EINVAL;
- goto restore;
- }
-
- lower_idx = TXRESERVE_MIN;
- upper_idx = TXRESERVE_MAX;
-
- phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
- while ((upper_idx - lower_idx) > 1) {
- txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
- ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- txreserve_val << 12 | txreserve_val << 8 |
- txreserve_val << 4 | txreserve_val);
- if (ret == 1) {
- upper_idx = txreserve_val;
- upper_ret = ret;
- } else if (ret == 0) {
- lower_idx = txreserve_val;
- lower_ret = ret;
- } else {
- goto restore;
- }
- }
-
- if (lower_idx == TXRESERVE_MIN) {
- lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- lower_idx << 12 | lower_idx << 8 |
- lower_idx << 4 | lower_idx);
- ret = lower_ret;
- } else if (upper_idx == TXRESERVE_MAX) {
- upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- upper_idx << 12 | upper_idx << 8 |
- upper_idx << 4 | upper_idx);
- ret = upper_ret;
- }
- if (ret < 0)
- goto restore;
-
- /* We calibrate TX-VCM in different logic. Check upper index and then
- * lower index. If this calibration is valid, apply lower index's result.
- */
- ret = upper_ret - lower_ret;
- if (ret == 1) {
- ret = 0;
- /* Make sure we use upper_idx in our calibration system */
- cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- upper_idx << 12 | upper_idx << 8 |
- upper_idx << 4 | upper_idx);
- phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
- } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
- lower_ret == 1) {
- ret = 0;
- cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
- MTK_PHY_DA_RX_PSBN_TBT_MASK |
- MTK_PHY_DA_RX_PSBN_HBT_MASK |
- MTK_PHY_DA_RX_PSBN_GBE_MASK |
- MTK_PHY_DA_RX_PSBN_LP_MASK,
- lower_idx << 12 | lower_idx << 8 |
- lower_idx << 4 | lower_idx);
- phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
- lower_idx);
- } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
- lower_ret == 0) {
- ret = 0;
- phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
- upper_idx);
- } else {
- ret = -EINVAL;
- }
-
-restore:
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ANA_CALEN);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_TXVOS_CALEN);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
- MTK_PHY_RG_ZCALEN_A);
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
- MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
- MTK_PHY_RG_ZCALEN_D);
-
- return ret;
-}
-
-static void mt798x_phy_common_finetune(struct phy_device *phydev)
-{
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
- __phy_write(phydev, 0x11, 0xc71);
- __phy_write(phydev, 0x12, 0xc);
- __phy_write(phydev, 0x10, 0x8fae);
-
- /* EnabRandUpdTrig = 1 */
- __phy_write(phydev, 0x11, 0x2f00);
- __phy_write(phydev, 0x12, 0xe);
- __phy_write(phydev, 0x10, 0x8fb0);
-
- /* NormMseLoThresh = 85 */
- __phy_write(phydev, 0x11, 0x55a0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x83aa);
-
- /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */
- __phy_write(phydev, 0x11, 0x240);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9680);
-
- /* TrFreeze = 0 (mt7988 default) */
- __phy_write(phydev, 0x11, 0x0);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9686);
-
- /* SSTrKp100 = 5 */
- /* SSTrKf100 = 6 */
- /* SSTrKp1000Mas = 5 */
- /* SSTrKf1000Mas = 6 */
- /* SSTrKp1000Slv = 5 */
- /* SSTrKf1000Slv = 6 */
- __phy_write(phydev, 0x11, 0xbaef);
- __phy_write(phydev, 0x12, 0x2e);
- __phy_write(phydev, 0x10, 0x968c);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-}
-
-static void mt7981_phy_finetune(struct phy_device *phydev)
-{
- u16 val[8] = { 0x01ce, 0x01c1,
- 0x020f, 0x0202,
- 0x03d0, 0x03c0,
- 0x0013, 0x0005 };
- int i, k;
-
- /* 100M eye finetune:
- * Keep middle level of TX MLT3 shapper as default.
- * Only change TX MLT3 overshoot level here.
- */
- for (k = 0, i = 1; i < 12; i++) {
- if (i % 3 == 0)
- continue;
- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
- }
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* ResetSyncOffset = 6 */
- __phy_write(phydev, 0x11, 0x600);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
-
- /* VgaDecRate = 1 */
- __phy_write(phydev, 0x11, 0x4c2a);
- __phy_write(phydev, 0x12, 0x3e);
- __phy_write(phydev, 0x10, 0x8fa4);
-
- /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
- * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
- */
- __phy_write(phydev, 0x11, 0xd10a);
- __phy_write(phydev, 0x12, 0x34);
- __phy_write(phydev, 0x10, 0x8f82);
-
- /* VcoSlicerThreshBitsHigh */
- __phy_write(phydev, 0x11, 0x5555);
- __phy_write(phydev, 0x12, 0x55);
- __phy_write(phydev, 0x10, 0x8ec0);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
- BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
-
- /* rg_tr_lpf_cnt_val = 512 */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
-
- /* IIR2 related */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
-
- /* FFE peaking */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
- MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
- MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
-
- /* Disable LDO pump */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
- /* Adjust LDO output voltage */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
-}
-
-static void mt7988_phy_finetune(struct phy_device *phydev)
-{
- u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
- 0x020d, 0x0206, 0x0384, 0x03d0,
- 0x03c6, 0x030a, 0x0011, 0x0005 };
- int i;
-
- /* Set default MLT3 shaper first */
- for (i = 0; i < 12; i++)
- phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
-
- /* TCT finetune */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* ResetSyncOffset = 5 */
- __phy_write(phydev, 0x11, 0x500);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8fc0);
-
- /* VgaDecRate is 1 at default on mt7988 */
-
- /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7,
- * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7
- */
- __phy_write(phydev, 0x11, 0xb90a);
- __phy_write(phydev, 0x12, 0x6f);
- __phy_write(phydev, 0x10, 0x8f82);
-
- /* RemAckCntLimitCtrl = 1 */
- __phy_write(phydev, 0x11, 0xfbba);
- __phy_write(phydev, 0x12, 0xc3);
- __phy_write(phydev, 0x10, 0x87f8);
-
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
- MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
- BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa));
-
- /* rg_tr_lpf_cnt_val = 1023 */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x3ff);
-}
-
-static void mt798x_phy_eee(struct phy_device *phydev)
-{
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
- MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
- MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
- FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
- MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
- 0xff));
-
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_TESTMUX_ADC_CTRL,
- MTK_PHY_RG_TXEN_DIG_MASK);
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
-
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
- MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
- MTK_PHY_LPI_SLV_SEND_TX_EN,
- FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
-
- /* Keep MTK_PHY_LPI_SEND_LOC_TIMER as 375 */
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
- MTK_PHY_LPI_TXPCS_LOC_RCV);
-
- /* This also fixes some IoT issues, such as CH340 */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
- MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
- FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
- FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
- MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
- FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
- 0x33) |
- MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
- MTK_PHY_LPI_VCO_EEE_STG0_EN);
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
- MTK_PHY_EEE_WAKE_MAS_INT_DC |
- MTK_PHY_EEE_WAKE_SLV_INT_DC);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
- MTK_PHY_SMI_DETCNT_MAX_MASK,
- FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
- MTK_PHY_SMI_DET_MAX_EN);
-
- phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
- MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
- MTK_PHY_TREC_UPDATE_ENAB_CLR |
- MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
- MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- /* Regsigdet_sel_1000 = 0 */
- __phy_write(phydev, 0x11, 0xb);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x9690);
-
- /* REG_EEE_st2TrKf1000 = 2 */
- __phy_write(phydev, 0x11, 0x114f);
- __phy_write(phydev, 0x12, 0x2);
- __phy_write(phydev, 0x10, 0x969a);
-
- /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
- __phy_write(phydev, 0x11, 0x3028);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x969e);
-
- /* RegEEE_slv_wake_int_timer_tar = 8 */
- __phy_write(phydev, 0x11, 0x5010);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a0);
-
- /* RegEEE_trfreeze_timer2 = 586 */
- __phy_write(phydev, 0x11, 0x24a);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96a8);
-
- /* RegEEE100Stg1_tar = 16 */
- __phy_write(phydev, 0x11, 0x3210);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96b8);
-
- /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */
- __phy_write(phydev, 0x11, 0x1463);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x96ca);
-
- /* DfeTailEnableVgaThresh1000 = 27 */
- __phy_write(phydev, 0x11, 0x36);
- __phy_write(phydev, 0x12, 0x0);
- __phy_write(phydev, 0x10, 0x8f80);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
- __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
-
- __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
- FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- phy_modify_mmd(phydev, MDIO_MMD_VEND1,
- MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
- MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
- FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
-}
-
-static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
- u8 start_pair, u8 end_pair)
-{
- u8 pair_n;
- int ret;
-
- for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
- /* TX_OFFSET & TX_AMP have no SW calibration. */
- switch (cal_item) {
- case TX_VCM:
- ret = tx_vcm_cal_sw(phydev, pair_n);
- break;
- default:
- return -EINVAL;
- }
- if (ret)
- return ret;
- }
- return 0;
-}
-
-static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
- u8 start_pair, u8 end_pair, u32 *buf)
-{
- u8 pair_n;
- int ret;
-
- for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
- /* TX_VCM has no efuse calibration. */
- switch (cal_item) {
- case REXT:
- ret = rext_cal_efuse(phydev, buf);
- break;
- case TX_OFFSET:
- ret = tx_offset_cal_efuse(phydev, buf);
- break;
- case TX_AMP:
- ret = tx_amp_cal_efuse(phydev, buf);
- break;
- case TX_R50:
- ret = tx_r50_cal_efuse(phydev, buf, pair_n);
- break;
- default:
- return -EINVAL;
- }
- if (ret)
- return ret;
- }
-
- return 0;
-}
-
-static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
- enum CAL_MODE cal_mode, u8 start_pair,
- u8 end_pair, u32 *buf)
-{
- int ret;
-
- switch (cal_mode) {
- case EFUSE_M:
- ret = cal_efuse(phydev, cal_item, start_pair,
- end_pair, buf);
- break;
- case SW_M:
- ret = cal_sw(phydev, cal_item, start_pair, end_pair);
- break;
- default:
- return -EINVAL;
- }
-
- if (ret) {
- phydev_err(phydev, "cal %d failed\n", cal_item);
- return -EIO;
- }
-
- return 0;
-}
-
-static int mt798x_phy_calibration(struct phy_device *phydev)
-{
- int ret = 0;
- u32 *buf;
- size_t len;
- struct nvmem_cell *cell;
-
- cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
- if (IS_ERR(cell)) {
- if (PTR_ERR(cell) == -EPROBE_DEFER)
- return PTR_ERR(cell);
- return 0;
- }
-
- buf = (u32 *)nvmem_cell_read(cell, &len);
- if (IS_ERR(buf))
- return PTR_ERR(buf);
- nvmem_cell_put(cell);
-
- if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
- phydev_err(phydev, "invalid efuse data\n");
- ret = -EINVAL;
- goto out;
- }
-
- ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
- if (ret)
- goto out;
- ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
- if (ret)
- goto out;
-
-out:
- kfree(buf);
- return ret;
-}
-
-static int mt798x_phy_config_init(struct phy_device *phydev)
-{
- switch (phydev->drv->phy_id) {
- case MTK_GPHY_ID_MT7981:
- mt7981_phy_finetune(phydev);
- break;
- case MTK_GPHY_ID_MT7988:
- mt7988_phy_finetune(phydev);
- break;
- }
-
- mt798x_phy_common_finetune(phydev);
- mt798x_phy_eee(phydev);
-
- return mt798x_phy_calibration(phydev);
-}
-
-static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
- bool on)
-{
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- bool changed;
-
- if (on)
- changed = !test_and_set_bit(bit_on, &priv->led_state);
- else
- changed = !!test_and_clear_bit(bit_on, &priv->led_state);
-
- changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
- (index ? 16 : 0), &priv->led_state);
- if (changed)
- return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED_ON_MASK,
- on ? MTK_PHY_LED_ON_FORCE_ON : 0);
- else
- return 0;
-}
-
-static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
- bool blinking)
-{
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- bool changed;
-
- if (blinking)
- changed = !test_and_set_bit(bit_blink, &priv->led_state);
- else
- changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
-
- changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
- (index ? 16 : 0), &priv->led_state);
- if (changed)
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
- blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
- else
- return 0;
-}
-
-static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
- unsigned long *delay_on,
- unsigned long *delay_off)
-{
- bool blinking = false;
- int err = 0;
-
- if (index > 1)
- return -EINVAL;
-
- if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
- blinking = true;
- *delay_on = 50;
- *delay_off = 50;
- }
-
- err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
- if (err)
- return err;
-
- return mt798x_phy_hw_led_on_set(phydev, index, false);
-}
-
-static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
- u8 index, enum led_brightness value)
-{
- int err;
-
- err = mt798x_phy_hw_led_blink_set(phydev, index, false);
- if (err)
- return err;
-
- return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
-}
-
-static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
- BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
- BIT(TRIGGER_NETDEV_LINK) |
- BIT(TRIGGER_NETDEV_LINK_10) |
- BIT(TRIGGER_NETDEV_LINK_100) |
- BIT(TRIGGER_NETDEV_LINK_1000) |
- BIT(TRIGGER_NETDEV_RX) |
- BIT(TRIGGER_NETDEV_TX));
-
-static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
- unsigned long rules)
-{
- if (index > 1)
- return -EINVAL;
-
- /* All combinations of the supported triggers are allowed */
- if (rules & ~supported_triggers)
- return -EOPNOTSUPP;
-
- return 0;
-};
-
-static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
- unsigned long *rules)
-{
- unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
- unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- int on, blink;
-
- if (index > 1)
- return -EINVAL;
-
- on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
- index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
-
- if (on < 0)
- return -EIO;
-
- blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
- index ? MTK_PHY_LED1_BLINK_CTRL :
- MTK_PHY_LED0_BLINK_CTRL);
- if (blink < 0)
- return -EIO;
-
- if ((on & (MTK_PHY_LED_ON_LINK | MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX |
- MTK_PHY_LED_ON_LINKDOWN)) ||
- (blink & (MTK_PHY_LED_BLINK_RX | MTK_PHY_LED_BLINK_TX)))
- set_bit(bit_netdev, &priv->led_state);
- else
- clear_bit(bit_netdev, &priv->led_state);
-
- if (on & MTK_PHY_LED_ON_FORCE_ON)
- set_bit(bit_on, &priv->led_state);
- else
- clear_bit(bit_on, &priv->led_state);
-
- if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
- set_bit(bit_blink, &priv->led_state);
- else
- clear_bit(bit_blink, &priv->led_state);
-
- if (!rules)
- return 0;
-
- if (on & MTK_PHY_LED_ON_LINK)
- *rules |= BIT(TRIGGER_NETDEV_LINK);
-
- if (on & MTK_PHY_LED_ON_LINK10)
- *rules |= BIT(TRIGGER_NETDEV_LINK_10);
-
- if (on & MTK_PHY_LED_ON_LINK100)
- *rules |= BIT(TRIGGER_NETDEV_LINK_100);
-
- if (on & MTK_PHY_LED_ON_LINK1000)
- *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
-
- if (on & MTK_PHY_LED_ON_FDX)
- *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
-
- if (on & MTK_PHY_LED_ON_HDX)
- *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
-
- if (blink & MTK_PHY_LED_BLINK_RX)
- *rules |= BIT(TRIGGER_NETDEV_RX);
-
- if (blink & MTK_PHY_LED_BLINK_TX)
- *rules |= BIT(TRIGGER_NETDEV_TX);
-
- return 0;
-};
-
-static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
- unsigned long rules)
-{
- unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
- struct mtk_socphy_priv *priv = phydev->priv;
- u16 on = 0, blink = 0;
- int ret;
-
- if (index > 1)
- return -EINVAL;
-
- if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
- on |= MTK_PHY_LED_ON_FDX;
-
- if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
- on |= MTK_PHY_LED_ON_HDX;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK10;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK100;
-
- if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
- on |= MTK_PHY_LED_ON_LINK1000;
-
- if (rules & BIT(TRIGGER_NETDEV_RX)) {
- blink |= (on & MTK_PHY_LED_ON_LINK) ?
- (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100RX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000RX : 0)) :
- MTK_PHY_LED_BLINK_RX;
- }
-
- if (rules & BIT(TRIGGER_NETDEV_TX)) {
- blink |= (on & MTK_PHY_LED_ON_LINK) ?
- (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100TX : 0) |
- ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000TX : 0)) :
- MTK_PHY_LED_BLINK_TX;
- }
-
- if (blink || on)
- set_bit(bit_netdev, &priv->led_state);
- else
- clear_bit(bit_netdev, &priv->led_state);
-
- ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_ON_CTRL :
- MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED_ON_FDX |
- MTK_PHY_LED_ON_HDX |
- MTK_PHY_LED_ON_LINK,
- on);
-
- if (ret)
- return ret;
-
- return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_BLINK_CTRL :
- MTK_PHY_LED0_BLINK_CTRL, blink);
-};
-
-static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
-{
- struct mtk_socphy_shared *priv = phydev->shared->priv;
- u32 polarities;
-
- if (led_num == 0)
- polarities = ~(priv->boottrap);
- else
- polarities = MTK_PHY_LED1_DEFAULT_POLARITIES;
-
- if (polarities & BIT(phydev->mdio.addr))
- return true;
-
- return false;
-}
-
-static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev)
-{
- struct pinctrl *pinctrl;
- int index;
-
- /* Setup LED polarity according to bootstrap use of LED pins */
- for (index = 0; index < 2; ++index)
- phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
- MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
- MTK_PHY_LED_ON_POLARITY,
- mt7988_phy_led_get_polarity(phydev, index) ?
- MTK_PHY_LED_ON_POLARITY : 0);
-
- /* Only now setup pinctrl to avoid bogus blinking */
- pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
- if (IS_ERR(pinctrl))
- dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
-
- return 0;
-}
-
-static int mt7988_phy_probe_shared(struct phy_device *phydev)
-{
- struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
- struct mtk_socphy_shared *shared = phydev->shared->priv;
- struct regmap *regmap;
- u32 reg;
- int ret;
-
- /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
- * LED_C and LED_D respectively. At the same time those pins are used to
- * bootstrap configuration of the reference clock source (LED_A),
- * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
- * In practise this is done using a LED and a resistor pulling the pin
- * either to GND or to VIO.
- * The detected value at boot time is accessible at run-time using the
- * TPBANK0 register located in the gpio base of the pinctrl, in order
- * to read it here it needs to be referenced by a phandle called
- * 'mediatek,pio' in the MDIO bus hosting the PHY.
- * The 4 bits in TPBANK0 are kept as package shared data and are used to
- * set LED polarity for each of the LED0.
- */
- regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
- if (IS_ERR(regmap))
- return PTR_ERR(regmap);
-
- ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, &reg);
- if (ret)
- return ret;
-
- shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
-
- return 0;
-}
-
-static void mt798x_phy_leds_state_init(struct phy_device *phydev)
-{
- int i;
-
- for (i = 0; i < 2; ++i)
- mt798x_phy_led_hw_control_get(phydev, i, NULL);
-}
-
-static int mt7988_phy_probe(struct phy_device *phydev)
-{
- struct mtk_socphy_shared *shared;
- struct mtk_socphy_priv *priv;
- int err;
-
- if (phydev->mdio.addr > 3)
- return -EINVAL;
-
- err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
- sizeof(struct mtk_socphy_shared));
- if (err)
- return err;
-
- if (phy_package_probe_once(phydev)) {
- err = mt7988_phy_probe_shared(phydev);
- if (err)
- return err;
- }
-
- shared = phydev->shared->priv;
- priv = &shared->priv[phydev->mdio.addr];
-
- phydev->priv = priv;
-
- mt798x_phy_leds_state_init(phydev);
-
- err = mt7988_phy_fix_leds_polarities(phydev);
- if (err)
- return err;
-
- /* Disable TX power saving at probing to:
- * 1. Meet common mode compliance test criteria
- * 2. Make sure that TX-VCM calibration works fine
- */
- phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
- MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
-
- return mt798x_phy_calibration(phydev);
-}
-
-static int mt7981_phy_probe(struct phy_device *phydev)
-{
- struct mtk_socphy_priv *priv;
-
- priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv),
- GFP_KERNEL);
- if (!priv)
- return -ENOMEM;
-
- phydev->priv = priv;
-
- mt798x_phy_leds_state_init(phydev);
-
- return mt798x_phy_calibration(phydev);
-}
-
-static struct phy_driver mtk_socphy_driver[] = {
- {
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
- .name = "MediaTek MT7981 PHY",
- .config_init = mt798x_phy_config_init,
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
- .probe = mt7981_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
- .led_blink_set = mt798x_phy_led_blink_set,
- .led_brightness_set = mt798x_phy_led_brightness_set,
- .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
- .led_hw_control_set = mt798x_phy_led_hw_control_set,
- .led_hw_control_get = mt798x_phy_led_hw_control_get,
- },
- {
- PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
- .name = "MediaTek MT7988 PHY",
- .config_init = mt798x_phy_config_init,
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
- .probe = mt7988_phy_probe,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_socphy_read_page,
- .write_page = mtk_socphy_write_page,
- .led_blink_set = mt798x_phy_led_blink_set,
- .led_brightness_set = mt798x_phy_led_brightness_set,
- .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
- .led_hw_control_set = mt798x_phy_led_hw_control_set,
- .led_hw_control_get = mt798x_phy_led_hw_control_get,
- },
-};
-
-module_phy_driver(mtk_socphy_driver);
-
-static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
- { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
- { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
- { }
-};
-
-MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
-MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
-MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
-MODULE_LICENSE("GPL");
-
-MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
--- a/drivers/net/phy/mediatek-ge.c
+++ /dev/null
@@ -1,148 +0,0 @@
-// SPDX-License-Identifier: GPL-2.0+
-#include <linux/of.h>
-#include <linux/bitfield.h>
-#include <linux/module.h>
-#include <linux/phy.h>
-
-#define MTK_EXT_PAGE_ACCESS 0x1f
-#define MTK_PHY_PAGE_STANDARD 0x0000
-#define MTK_PHY_PAGE_EXTENDED 0x0001
-#define MTK_PHY_PAGE_EXTENDED_2 0x0002
-#define MTK_PHY_PAGE_EXTENDED_3 0x0003
-#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
-#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
-
-static int mtk_gephy_read_page(struct phy_device *phydev)
-{
- return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
-}
-
-static int mtk_gephy_write_page(struct phy_device *phydev, int page)
-{
- return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
-}
-
-static void mtk_gephy_config_init(struct phy_device *phydev)
-{
- /* Disable EEE */
- phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
-
- /* Enable HW auto downshift */
- phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
-
- /* Increase SlvDPSready time */
- phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
- __phy_write(phydev, 0x10, 0xafae);
- __phy_write(phydev, 0x12, 0x2f);
- __phy_write(phydev, 0x10, 0x8fae);
- phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
-
- /* Adjust 100_mse_threshold */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
-
- /* Disable mcc */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
-}
-
-static int mt7530_phy_config_init(struct phy_device *phydev)
-{
- mtk_gephy_config_init(phydev);
-
- /* Increase post_update_timer */
- phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
-
- return 0;
-}
-
-static int mt7530_led_config_of(struct phy_device *phydev)
-{
- struct device_node *np = phydev->mdio.dev.of_node;
- const __be32 *paddr;
- int len;
- int i;
-
- paddr = of_get_property(np, "mediatek,led-config", &len);
- if (!paddr)
- return 0;
-
- if (len < (2 * sizeof(*paddr)))
- return -EINVAL;
-
- len /= sizeof(*paddr);
-
- phydev_warn(phydev, "Configure LED registers (num=%d)\n", len);
- for (i = 0; i < len - 1; i += 2) {
- u32 reg;
- u32 val;
-
- reg = be32_to_cpup(paddr + i);
- val = be32_to_cpup(paddr + i + 1);
-
- phy_write_mmd(phydev, MDIO_MMD_VEND2, reg, val);
- }
-
- return 0;
-}
-
-static int mt7531_phy_config_init(struct phy_device *phydev)
-{
- mtk_gephy_config_init(phydev);
-
- /* PHY link down power saving enable */
- phy_set_bits(phydev, 0x17, BIT(4));
- phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
-
- /* Set TX Pair delay selection */
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
- phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
-
- /* LED Config*/
- mt7530_led_config_of(phydev);
-
- return 0;
-}
-
-static struct phy_driver mtk_gephy_driver[] = {
- {
- PHY_ID_MATCH_EXACT(0x03a29412),
- .name = "MediaTek MT7530 PHY",
- .config_init = mt7530_phy_config_init,
- /* Interrupts are handled by the switch, not the PHY
- * itself.
- */
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_gephy_read_page,
- .write_page = mtk_gephy_write_page,
- },
- {
- PHY_ID_MATCH_EXACT(0x03a29441),
- .name = "MediaTek MT7531 PHY",
- .config_init = mt7531_phy_config_init,
- /* Interrupts are handled by the switch, not the PHY
- * itself.
- */
- .config_intr = genphy_no_config_intr,
- .handle_interrupt = genphy_handle_interrupt_no_ack,
- .suspend = genphy_suspend,
- .resume = genphy_resume,
- .read_page = mtk_gephy_read_page,
- .write_page = mtk_gephy_write_page,
- },
-};
-
-module_phy_driver(mtk_gephy_driver);
-
-static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
- { PHY_ID_MATCH_EXACT(0x03a29441) },
- { PHY_ID_MATCH_EXACT(0x03a29412) },
- { }
-};
-
-MODULE_DESCRIPTION("MediaTek Gigabit Ethernet PHY driver");
-MODULE_AUTHOR("DENG, Qingfang <dqfext@gmail.com>");
-MODULE_LICENSE("GPL");
-
-MODULE_DEVICE_TABLE(mdio, mtk_gephy_tbl);
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk-ge-soc.c
@@ -0,0 +1,1555 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/bitfield.h>
+#include <linux/bitmap.h>
+#include <linux/mfd/syscon.h>
+#include <linux/module.h>
+#include <linux/nvmem-consumer.h>
+#include <linux/pinctrl/consumer.h>
+#include <linux/phy.h>
+#include <linux/regmap.h>
+
+#define MTK_GPHY_ID_MT7981 0x03a29461
+#define MTK_GPHY_ID_MT7988 0x03a29481
+
+#define MTK_EXT_PAGE_ACCESS 0x1f
+#define MTK_PHY_PAGE_STANDARD 0x0000
+#define MTK_PHY_PAGE_EXTENDED_3 0x0003
+
+#define MTK_PHY_LPI_REG_14 0x14
+#define MTK_PHY_LPI_WAKE_TIMER_1000_MASK GENMASK(8, 0)
+
+#define MTK_PHY_LPI_REG_1c 0x1c
+#define MTK_PHY_SMI_DET_ON_THRESH_MASK GENMASK(13, 8)
+
+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+
+#define ANALOG_INTERNAL_OPERATION_MAX_US 20
+#define TXRESERVE_MIN 0
+#define TXRESERVE_MAX 7
+
+#define MTK_PHY_ANARG_RG 0x10
+#define MTK_PHY_TCLKOFFSET_MASK GENMASK(12, 8)
+
+/* Registers on MDIO_MMD_VEND1 */
+#define MTK_PHY_TXVLD_DA_RG 0x12
+#define MTK_PHY_DA_TX_I2MPB_A_GBE_MASK GENMASK(15, 10)
+#define MTK_PHY_DA_TX_I2MPB_A_TBT_MASK GENMASK(5, 0)
+
+#define MTK_PHY_TX_I2MPB_TEST_MODE_A2 0x16
+#define MTK_PHY_DA_TX_I2MPB_A_HBT_MASK GENMASK(15, 10)
+#define MTK_PHY_DA_TX_I2MPB_A_TST_MASK GENMASK(5, 0)
+
+#define MTK_PHY_TX_I2MPB_TEST_MODE_B1 0x17
+#define MTK_PHY_DA_TX_I2MPB_B_GBE_MASK GENMASK(13, 8)
+#define MTK_PHY_DA_TX_I2MPB_B_TBT_MASK GENMASK(5, 0)
+
+#define MTK_PHY_TX_I2MPB_TEST_MODE_B2 0x18
+#define MTK_PHY_DA_TX_I2MPB_B_HBT_MASK GENMASK(13, 8)
+#define MTK_PHY_DA_TX_I2MPB_B_TST_MASK GENMASK(5, 0)
+
+#define MTK_PHY_TX_I2MPB_TEST_MODE_C1 0x19
+#define MTK_PHY_DA_TX_I2MPB_C_GBE_MASK GENMASK(13, 8)
+#define MTK_PHY_DA_TX_I2MPB_C_TBT_MASK GENMASK(5, 0)
+
+#define MTK_PHY_TX_I2MPB_TEST_MODE_C2 0x20
+#define MTK_PHY_DA_TX_I2MPB_C_HBT_MASK GENMASK(13, 8)
+#define MTK_PHY_DA_TX_I2MPB_C_TST_MASK GENMASK(5, 0)
+
+#define MTK_PHY_TX_I2MPB_TEST_MODE_D1 0x21
+#define MTK_PHY_DA_TX_I2MPB_D_GBE_MASK GENMASK(13, 8)
+#define MTK_PHY_DA_TX_I2MPB_D_TBT_MASK GENMASK(5, 0)
+
+#define MTK_PHY_TX_I2MPB_TEST_MODE_D2 0x22
+#define MTK_PHY_DA_TX_I2MPB_D_HBT_MASK GENMASK(13, 8)
+#define MTK_PHY_DA_TX_I2MPB_D_TST_MASK GENMASK(5, 0)
+
+#define MTK_PHY_RXADC_CTRL_RG7 0xc6
+#define MTK_PHY_DA_AD_BUF_BIAS_LP_MASK GENMASK(9, 8)
+
+#define MTK_PHY_RXADC_CTRL_RG9 0xc8
+#define MTK_PHY_DA_RX_PSBN_TBT_MASK GENMASK(14, 12)
+#define MTK_PHY_DA_RX_PSBN_HBT_MASK GENMASK(10, 8)
+#define MTK_PHY_DA_RX_PSBN_GBE_MASK GENMASK(6, 4)
+#define MTK_PHY_DA_RX_PSBN_LP_MASK GENMASK(2, 0)
+
+#define MTK_PHY_LDO_OUTPUT_V 0xd7
+
+#define MTK_PHY_RG_ANA_CAL_RG0 0xdb
+#define MTK_PHY_RG_CAL_CKINV BIT(12)
+#define MTK_PHY_RG_ANA_CALEN BIT(8)
+#define MTK_PHY_RG_ZCALEN_A BIT(0)
+
+#define MTK_PHY_RG_ANA_CAL_RG1 0xdc
+#define MTK_PHY_RG_ZCALEN_B BIT(12)
+#define MTK_PHY_RG_ZCALEN_C BIT(8)
+#define MTK_PHY_RG_ZCALEN_D BIT(4)
+#define MTK_PHY_RG_TXVOS_CALEN BIT(0)
+
+#define MTK_PHY_RG_ANA_CAL_RG5 0xe0
+#define MTK_PHY_RG_REXT_TRIM_MASK GENMASK(13, 8)
+
+#define MTK_PHY_RG_TX_FILTER 0xfe
+
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120 0x120
+#define MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK GENMASK(12, 8)
+#define MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK GENMASK(4, 0)
+
+#define MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122 0x122
+#define MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK GENMASK(7, 0)
+
+#define MTK_PHY_RG_TESTMUX_ADC_CTRL 0x144
+#define MTK_PHY_RG_TXEN_DIG_MASK GENMASK(5, 5)
+
+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B 0x172
+#define MTK_PHY_CR_TX_AMP_OFFSET_A_MASK GENMASK(13, 8)
+#define MTK_PHY_CR_TX_AMP_OFFSET_B_MASK GENMASK(6, 0)
+
+#define MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D 0x173
+#define MTK_PHY_CR_TX_AMP_OFFSET_C_MASK GENMASK(13, 8)
+#define MTK_PHY_CR_TX_AMP_OFFSET_D_MASK GENMASK(6, 0)
+
+#define MTK_PHY_RG_AD_CAL_COMP 0x17a
+#define MTK_PHY_AD_CAL_COMP_OUT_SHIFT (8)
+
+#define MTK_PHY_RG_AD_CAL_CLK 0x17b
+#define MTK_PHY_DA_CAL_CLK BIT(0)
+
+#define MTK_PHY_RG_AD_CALIN 0x17c
+#define MTK_PHY_DA_CALIN_FLAG BIT(0)
+
+#define MTK_PHY_RG_DASN_DAC_IN0_A 0x17d
+#define MTK_PHY_DASN_DAC_IN0_A_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DASN_DAC_IN0_B 0x17e
+#define MTK_PHY_DASN_DAC_IN0_B_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DASN_DAC_IN0_C 0x17f
+#define MTK_PHY_DASN_DAC_IN0_C_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DASN_DAC_IN0_D 0x180
+#define MTK_PHY_DASN_DAC_IN0_D_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DASN_DAC_IN1_A 0x181
+#define MTK_PHY_DASN_DAC_IN1_A_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DASN_DAC_IN1_B 0x182
+#define MTK_PHY_DASN_DAC_IN1_B_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DASN_DAC_IN1_C 0x183
+#define MTK_PHY_DASN_DAC_IN1_C_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DASN_DAC_IN1_D 0x184
+#define MTK_PHY_DASN_DAC_IN1_D_MASK GENMASK(9, 0)
+
+#define MTK_PHY_RG_DEV1E_REG19b 0x19b
+#define MTK_PHY_BYPASS_DSP_LPI_READY BIT(8)
+
+#define MTK_PHY_RG_LP_IIR2_K1_L 0x22a
+#define MTK_PHY_RG_LP_IIR2_K1_U 0x22b
+#define MTK_PHY_RG_LP_IIR2_K2_L 0x22c
+#define MTK_PHY_RG_LP_IIR2_K2_U 0x22d
+#define MTK_PHY_RG_LP_IIR2_K3_L 0x22e
+#define MTK_PHY_RG_LP_IIR2_K3_U 0x22f
+#define MTK_PHY_RG_LP_IIR2_K4_L 0x230
+#define MTK_PHY_RG_LP_IIR2_K4_U 0x231
+#define MTK_PHY_RG_LP_IIR2_K5_L 0x232
+#define MTK_PHY_RG_LP_IIR2_K5_U 0x233
+
+#define MTK_PHY_RG_DEV1E_REG234 0x234
+#define MTK_PHY_TR_OPEN_LOOP_EN_MASK GENMASK(0, 0)
+#define MTK_PHY_LPF_X_AVERAGE_MASK GENMASK(7, 4)
+#define MTK_PHY_TR_LP_IIR_EEE_EN BIT(12)
+
+#define MTK_PHY_RG_LPF_CNT_VAL 0x235
+
+#define MTK_PHY_RG_DEV1E_REG238 0x238
+#define MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK GENMASK(8, 0)
+#define MTK_PHY_LPI_SLV_SEND_TX_EN BIT(12)
+
+#define MTK_PHY_RG_DEV1E_REG239 0x239
+#define MTK_PHY_LPI_SEND_LOC_TIMER_MASK GENMASK(8, 0)
+#define MTK_PHY_LPI_TXPCS_LOC_RCV BIT(12)
+
+#define MTK_PHY_RG_DEV1E_REG27C 0x27c
+#define MTK_PHY_VGASTATE_FFE_THR_ST1_MASK GENMASK(12, 8)
+#define MTK_PHY_RG_DEV1E_REG27D 0x27d
+#define MTK_PHY_VGASTATE_FFE_THR_ST2_MASK GENMASK(4, 0)
+
+#define MTK_PHY_RG_DEV1E_REG2C7 0x2c7
+#define MTK_PHY_MAX_GAIN_MASK GENMASK(4, 0)
+#define MTK_PHY_MIN_GAIN_MASK GENMASK(12, 8)
+
+#define MTK_PHY_RG_DEV1E_REG2D1 0x2d1
+#define MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK GENMASK(7, 0)
+#define MTK_PHY_LPI_SKIP_SD_SLV_TR BIT(8)
+#define MTK_PHY_LPI_TR_READY BIT(9)
+#define MTK_PHY_LPI_VCO_EEE_STG0_EN BIT(10)
+
+#define MTK_PHY_RG_DEV1E_REG323 0x323
+#define MTK_PHY_EEE_WAKE_MAS_INT_DC BIT(0)
+#define MTK_PHY_EEE_WAKE_SLV_INT_DC BIT(4)
+
+#define MTK_PHY_RG_DEV1E_REG324 0x324
+#define MTK_PHY_SMI_DETCNT_MAX_MASK GENMASK(5, 0)
+#define MTK_PHY_SMI_DET_MAX_EN BIT(8)
+
+#define MTK_PHY_RG_DEV1E_REG326 0x326
+#define MTK_PHY_LPI_MODE_SD_ON BIT(0)
+#define MTK_PHY_RESET_RANDUPD_CNT BIT(1)
+#define MTK_PHY_TREC_UPDATE_ENAB_CLR BIT(2)
+#define MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF BIT(4)
+#define MTK_PHY_TR_READY_SKIP_AFE_WAKEUP BIT(5)
+
+#define MTK_PHY_LDO_PUMP_EN_PAIRAB 0x502
+#define MTK_PHY_LDO_PUMP_EN_PAIRCD 0x503
+
+#define MTK_PHY_DA_TX_R50_PAIR_A 0x53d
+#define MTK_PHY_DA_TX_R50_PAIR_B 0x53e
+#define MTK_PHY_DA_TX_R50_PAIR_C 0x53f
+#define MTK_PHY_DA_TX_R50_PAIR_D 0x540
+
+/* Registers on MDIO_MMD_VEND2 */
+#define MTK_PHY_LED0_ON_CTRL 0x24
+#define MTK_PHY_LED1_ON_CTRL 0x26
+#define MTK_PHY_LED_ON_MASK GENMASK(6, 0)
+#define MTK_PHY_LED_ON_LINK1000 BIT(0)
+#define MTK_PHY_LED_ON_LINK100 BIT(1)
+#define MTK_PHY_LED_ON_LINK10 BIT(2)
+#define MTK_PHY_LED_ON_LINK (MTK_PHY_LED_ON_LINK10 |\
+ MTK_PHY_LED_ON_LINK100 |\
+ MTK_PHY_LED_ON_LINK1000)
+#define MTK_PHY_LED_ON_LINKDOWN BIT(3)
+#define MTK_PHY_LED_ON_FDX BIT(4) /* Full duplex */
+#define MTK_PHY_LED_ON_HDX BIT(5) /* Half duplex */
+#define MTK_PHY_LED_ON_FORCE_ON BIT(6)
+#define MTK_PHY_LED_ON_POLARITY BIT(14)
+#define MTK_PHY_LED_ON_ENABLE BIT(15)
+
+#define MTK_PHY_LED0_BLINK_CTRL 0x25
+#define MTK_PHY_LED1_BLINK_CTRL 0x27
+#define MTK_PHY_LED_BLINK_1000TX BIT(0)
+#define MTK_PHY_LED_BLINK_1000RX BIT(1)
+#define MTK_PHY_LED_BLINK_100TX BIT(2)
+#define MTK_PHY_LED_BLINK_100RX BIT(3)
+#define MTK_PHY_LED_BLINK_10TX BIT(4)
+#define MTK_PHY_LED_BLINK_10RX BIT(5)
+#define MTK_PHY_LED_BLINK_RX (MTK_PHY_LED_BLINK_10RX |\
+ MTK_PHY_LED_BLINK_100RX |\
+ MTK_PHY_LED_BLINK_1000RX)
+#define MTK_PHY_LED_BLINK_TX (MTK_PHY_LED_BLINK_10TX |\
+ MTK_PHY_LED_BLINK_100TX |\
+ MTK_PHY_LED_BLINK_1000TX)
+#define MTK_PHY_LED_BLINK_COLLISION BIT(6)
+#define MTK_PHY_LED_BLINK_RX_CRC_ERR BIT(7)
+#define MTK_PHY_LED_BLINK_RX_IDLE_ERR BIT(8)
+#define MTK_PHY_LED_BLINK_FORCE_BLINK BIT(9)
+
+#define MTK_PHY_LED1_DEFAULT_POLARITIES BIT(1)
+
+#define MTK_PHY_RG_BG_RASEL 0x115
+#define MTK_PHY_RG_BG_RASEL_MASK GENMASK(2, 0)
+
+/* 'boottrap' register reflecting the configuration of the 4 PHY LEDs */
+#define RG_GPIO_MISC_TPBANK0 0x6f0
+#define RG_GPIO_MISC_TPBANK0_BOOTMODE GENMASK(11, 8)
+
+/* These macro privides efuse parsing for internal phy. */
+#define EFS_DA_TX_I2MPB_A(x) (((x) >> 0) & GENMASK(5, 0))
+#define EFS_DA_TX_I2MPB_B(x) (((x) >> 6) & GENMASK(5, 0))
+#define EFS_DA_TX_I2MPB_C(x) (((x) >> 12) & GENMASK(5, 0))
+#define EFS_DA_TX_I2MPB_D(x) (((x) >> 18) & GENMASK(5, 0))
+#define EFS_DA_TX_AMP_OFFSET_A(x) (((x) >> 24) & GENMASK(5, 0))
+
+#define EFS_DA_TX_AMP_OFFSET_B(x) (((x) >> 0) & GENMASK(5, 0))
+#define EFS_DA_TX_AMP_OFFSET_C(x) (((x) >> 6) & GENMASK(5, 0))
+#define EFS_DA_TX_AMP_OFFSET_D(x) (((x) >> 12) & GENMASK(5, 0))
+#define EFS_DA_TX_R50_A(x) (((x) >> 18) & GENMASK(5, 0))
+#define EFS_DA_TX_R50_B(x) (((x) >> 24) & GENMASK(5, 0))
+
+#define EFS_DA_TX_R50_C(x) (((x) >> 0) & GENMASK(5, 0))
+#define EFS_DA_TX_R50_D(x) (((x) >> 6) & GENMASK(5, 0))
+
+#define EFS_RG_BG_RASEL(x) (((x) >> 4) & GENMASK(2, 0))
+#define EFS_RG_REXT_TRIM(x) (((x) >> 7) & GENMASK(5, 0))
+
+enum {
+ NO_PAIR,
+ PAIR_A,
+ PAIR_B,
+ PAIR_C,
+ PAIR_D,
+};
+
+enum calibration_mode {
+ EFUSE_K,
+ SW_K
+};
+
+enum CAL_ITEM {
+ REXT,
+ TX_OFFSET,
+ TX_AMP,
+ TX_R50,
+ TX_VCM
+};
+
+enum CAL_MODE {
+ EFUSE_M,
+ SW_M
+};
+
+#define MTK_PHY_LED_STATE_FORCE_ON 0
+#define MTK_PHY_LED_STATE_FORCE_BLINK 1
+#define MTK_PHY_LED_STATE_NETDEV 2
+
+struct mtk_socphy_priv {
+ unsigned long led_state;
+};
+
+struct mtk_socphy_shared {
+ u32 boottrap;
+ struct mtk_socphy_priv priv[4];
+};
+
+static int mtk_socphy_read_page(struct phy_device *phydev)
+{
+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+}
+
+static int mtk_socphy_write_page(struct phy_device *phydev, int page)
+{
+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
+}
+
+/* One calibration cycle consists of:
+ * 1.Set DA_CALIN_FLAG high to start calibration. Keep it high
+ * until AD_CAL_COMP is ready to output calibration result.
+ * 2.Wait until DA_CAL_CLK is available.
+ * 3.Fetch AD_CAL_COMP_OUT.
+ */
+static int cal_cycle(struct phy_device *phydev, int devad,
+ u32 regnum, u16 mask, u16 cal_val)
+{
+ int reg_val;
+ int ret;
+
+ phy_modify_mmd(phydev, devad, regnum,
+ mask, cal_val);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
+ MTK_PHY_DA_CALIN_FLAG);
+
+ ret = phy_read_mmd_poll_timeout(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_AD_CAL_CLK, reg_val,
+ reg_val & MTK_PHY_DA_CAL_CLK, 500,
+ ANALOG_INTERNAL_OPERATION_MAX_US, false);
+ if (ret) {
+ phydev_err(phydev, "Calibration cycle timeout\n");
+ return ret;
+ }
+
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CALIN,
+ MTK_PHY_DA_CALIN_FLAG);
+ ret = phy_read_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_AD_CAL_COMP) >>
+ MTK_PHY_AD_CAL_COMP_OUT_SHIFT;
+ phydev_dbg(phydev, "cal_val: 0x%x, ret: %d\n", cal_val, ret);
+
+ return ret;
+}
+
+static int rext_fill_result(struct phy_device *phydev, u16 *buf)
+{
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG5,
+ MTK_PHY_RG_REXT_TRIM_MASK, buf[0] << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, MTK_PHY_RG_BG_RASEL,
+ MTK_PHY_RG_BG_RASEL_MASK, buf[1]);
+
+ return 0;
+}
+
+static int rext_cal_efuse(struct phy_device *phydev, u32 *buf)
+{
+ u16 rext_cal_val[2];
+
+ rext_cal_val[0] = EFS_RG_REXT_TRIM(buf[3]);
+ rext_cal_val[1] = EFS_RG_BG_RASEL(buf[3]);
+ rext_fill_result(phydev, rext_cal_val);
+
+ return 0;
+}
+
+static int tx_offset_fill_result(struct phy_device *phydev, u16 *buf)
+{
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
+ MTK_PHY_CR_TX_AMP_OFFSET_A_MASK, buf[0] << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_A_B,
+ MTK_PHY_CR_TX_AMP_OFFSET_B_MASK, buf[1]);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
+ MTK_PHY_CR_TX_AMP_OFFSET_C_MASK, buf[2] << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_CR_TX_AMP_OFFSET_C_D,
+ MTK_PHY_CR_TX_AMP_OFFSET_D_MASK, buf[3]);
+
+ return 0;
+}
+
+static int tx_offset_cal_efuse(struct phy_device *phydev, u32 *buf)
+{
+ u16 tx_offset_cal_val[4];
+
+ tx_offset_cal_val[0] = EFS_DA_TX_AMP_OFFSET_A(buf[0]);
+ tx_offset_cal_val[1] = EFS_DA_TX_AMP_OFFSET_B(buf[1]);
+ tx_offset_cal_val[2] = EFS_DA_TX_AMP_OFFSET_C(buf[1]);
+ tx_offset_cal_val[3] = EFS_DA_TX_AMP_OFFSET_D(buf[1]);
+
+ tx_offset_fill_result(phydev, tx_offset_cal_val);
+
+ return 0;
+}
+
+static int tx_amp_fill_result(struct phy_device *phydev, u16 *buf)
+{
+ int i;
+ int bias[16] = {};
+ const int vals_9461[16] = { 7, 1, 4, 7,
+ 7, 1, 4, 7,
+ 7, 1, 4, 7,
+ 7, 1, 4, 7 };
+ const int vals_9481[16] = { 10, 6, 6, 10,
+ 10, 6, 6, 10,
+ 10, 6, 6, 10,
+ 10, 6, 6, 10 };
+ switch (phydev->drv->phy_id) {
+ case MTK_GPHY_ID_MT7981:
+ /* We add some calibration to efuse values
+ * due to board level influence.
+ * GBE: +7, TBT: +1, HBT: +4, TST: +7
+ */
+ memcpy(bias, (const void *)vals_9461, sizeof(bias));
+ break;
+ case MTK_GPHY_ID_MT7988:
+ memcpy(bias, (const void *)vals_9481, sizeof(bias));
+ break;
+ }
+
+ /* Prevent overflow */
+ for (i = 0; i < 12; i++) {
+ if (buf[i >> 2] + bias[i] > 63) {
+ buf[i >> 2] = 63;
+ bias[i] = 0;
+ }
+ }
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
+ MTK_PHY_DA_TX_I2MPB_A_GBE_MASK, (buf[0] + bias[0]) << 10);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TXVLD_DA_RG,
+ MTK_PHY_DA_TX_I2MPB_A_TBT_MASK, buf[0] + bias[1]);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
+ MTK_PHY_DA_TX_I2MPB_A_HBT_MASK, (buf[0] + bias[2]) << 10);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_A2,
+ MTK_PHY_DA_TX_I2MPB_A_TST_MASK, buf[0] + bias[3]);
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
+ MTK_PHY_DA_TX_I2MPB_B_GBE_MASK, (buf[1] + bias[4]) << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B1,
+ MTK_PHY_DA_TX_I2MPB_B_TBT_MASK, buf[1] + bias[5]);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
+ MTK_PHY_DA_TX_I2MPB_B_HBT_MASK, (buf[1] + bias[6]) << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_B2,
+ MTK_PHY_DA_TX_I2MPB_B_TST_MASK, buf[1] + bias[7]);
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
+ MTK_PHY_DA_TX_I2MPB_C_GBE_MASK, (buf[2] + bias[8]) << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C1,
+ MTK_PHY_DA_TX_I2MPB_C_TBT_MASK, buf[2] + bias[9]);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
+ MTK_PHY_DA_TX_I2MPB_C_HBT_MASK, (buf[2] + bias[10]) << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_C2,
+ MTK_PHY_DA_TX_I2MPB_C_TST_MASK, buf[2] + bias[11]);
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
+ MTK_PHY_DA_TX_I2MPB_D_GBE_MASK, (buf[3] + bias[12]) << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D1,
+ MTK_PHY_DA_TX_I2MPB_D_TBT_MASK, buf[3] + bias[13]);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
+ MTK_PHY_DA_TX_I2MPB_D_HBT_MASK, (buf[3] + bias[14]) << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_TX_I2MPB_TEST_MODE_D2,
+ MTK_PHY_DA_TX_I2MPB_D_TST_MASK, buf[3] + bias[15]);
+
+ return 0;
+}
+
+static int tx_amp_cal_efuse(struct phy_device *phydev, u32 *buf)
+{
+ u16 tx_amp_cal_val[4];
+
+ tx_amp_cal_val[0] = EFS_DA_TX_I2MPB_A(buf[0]);
+ tx_amp_cal_val[1] = EFS_DA_TX_I2MPB_B(buf[0]);
+ tx_amp_cal_val[2] = EFS_DA_TX_I2MPB_C(buf[0]);
+ tx_amp_cal_val[3] = EFS_DA_TX_I2MPB_D(buf[0]);
+ tx_amp_fill_result(phydev, tx_amp_cal_val);
+
+ return 0;
+}
+
+static int tx_r50_fill_result(struct phy_device *phydev, u16 tx_r50_cal_val,
+ u8 txg_calen_x)
+{
+ int bias = 0;
+ u16 reg, val;
+
+ if (phydev->drv->phy_id == MTK_GPHY_ID_MT7988)
+ bias = -1;
+
+ val = clamp_val(bias + tx_r50_cal_val, 0, 63);
+
+ switch (txg_calen_x) {
+ case PAIR_A:
+ reg = MTK_PHY_DA_TX_R50_PAIR_A;
+ break;
+ case PAIR_B:
+ reg = MTK_PHY_DA_TX_R50_PAIR_B;
+ break;
+ case PAIR_C:
+ reg = MTK_PHY_DA_TX_R50_PAIR_C;
+ break;
+ case PAIR_D:
+ reg = MTK_PHY_DA_TX_R50_PAIR_D;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, reg, val | val << 8);
+
+ return 0;
+}
+
+static int tx_r50_cal_efuse(struct phy_device *phydev, u32 *buf,
+ u8 txg_calen_x)
+{
+ u16 tx_r50_cal_val;
+
+ switch (txg_calen_x) {
+ case PAIR_A:
+ tx_r50_cal_val = EFS_DA_TX_R50_A(buf[1]);
+ break;
+ case PAIR_B:
+ tx_r50_cal_val = EFS_DA_TX_R50_B(buf[1]);
+ break;
+ case PAIR_C:
+ tx_r50_cal_val = EFS_DA_TX_R50_C(buf[2]);
+ break;
+ case PAIR_D:
+ tx_r50_cal_val = EFS_DA_TX_R50_D(buf[2]);
+ break;
+ default:
+ return -EINVAL;
+ }
+ tx_r50_fill_result(phydev, tx_r50_cal_val, txg_calen_x);
+
+ return 0;
+}
+
+static int tx_vcm_cal_sw(struct phy_device *phydev, u8 rg_txreserve_x)
+{
+ u8 lower_idx, upper_idx, txreserve_val;
+ u8 lower_ret, upper_ret;
+ int ret;
+
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
+ MTK_PHY_RG_ANA_CALEN);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
+ MTK_PHY_RG_CAL_CKINV);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
+ MTK_PHY_RG_TXVOS_CALEN);
+
+ switch (rg_txreserve_x) {
+ case PAIR_A:
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN0_A,
+ MTK_PHY_DASN_DAC_IN0_A_MASK);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN1_A,
+ MTK_PHY_DASN_DAC_IN1_A_MASK);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_ANA_CAL_RG0,
+ MTK_PHY_RG_ZCALEN_A);
+ break;
+ case PAIR_B:
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN0_B,
+ MTK_PHY_DASN_DAC_IN0_B_MASK);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN1_B,
+ MTK_PHY_DASN_DAC_IN1_B_MASK);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_ANA_CAL_RG1,
+ MTK_PHY_RG_ZCALEN_B);
+ break;
+ case PAIR_C:
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN0_C,
+ MTK_PHY_DASN_DAC_IN0_C_MASK);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN1_C,
+ MTK_PHY_DASN_DAC_IN1_C_MASK);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_ANA_CAL_RG1,
+ MTK_PHY_RG_ZCALEN_C);
+ break;
+ case PAIR_D:
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN0_D,
+ MTK_PHY_DASN_DAC_IN0_D_MASK);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DASN_DAC_IN1_D,
+ MTK_PHY_DASN_DAC_IN1_D_MASK);
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_ANA_CAL_RG1,
+ MTK_PHY_RG_ZCALEN_D);
+ break;
+ default:
+ ret = -EINVAL;
+ goto restore;
+ }
+
+ lower_idx = TXRESERVE_MIN;
+ upper_idx = TXRESERVE_MAX;
+
+ phydev_dbg(phydev, "Start TX-VCM SW cal.\n");
+ while ((upper_idx - lower_idx) > 1) {
+ txreserve_val = DIV_ROUND_CLOSEST(lower_idx + upper_idx, 2);
+ ret = cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
+ txreserve_val << 12 | txreserve_val << 8 |
+ txreserve_val << 4 | txreserve_val);
+ if (ret == 1) {
+ upper_idx = txreserve_val;
+ upper_ret = ret;
+ } else if (ret == 0) {
+ lower_idx = txreserve_val;
+ lower_ret = ret;
+ } else {
+ goto restore;
+ }
+ }
+
+ if (lower_idx == TXRESERVE_MIN) {
+ lower_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RXADC_CTRL_RG9,
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
+ lower_idx << 12 | lower_idx << 8 |
+ lower_idx << 4 | lower_idx);
+ ret = lower_ret;
+ } else if (upper_idx == TXRESERVE_MAX) {
+ upper_ret = cal_cycle(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RXADC_CTRL_RG9,
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
+ upper_idx << 12 | upper_idx << 8 |
+ upper_idx << 4 | upper_idx);
+ ret = upper_ret;
+ }
+ if (ret < 0)
+ goto restore;
+
+ /* We calibrate TX-VCM in different logic. Check upper index and then
+ * lower index. If this calibration is valid, apply lower index's result.
+ */
+ ret = upper_ret - lower_ret;
+ if (ret == 1) {
+ ret = 0;
+ /* Make sure we use upper_idx in our calibration system */
+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
+ upper_idx << 12 | upper_idx << 8 |
+ upper_idx << 4 | upper_idx);
+ phydev_dbg(phydev, "TX-VCM SW cal result: 0x%x\n", upper_idx);
+ } else if (lower_idx == TXRESERVE_MIN && upper_ret == 1 &&
+ lower_ret == 1) {
+ ret = 0;
+ cal_cycle(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG9,
+ MTK_PHY_DA_RX_PSBN_TBT_MASK |
+ MTK_PHY_DA_RX_PSBN_HBT_MASK |
+ MTK_PHY_DA_RX_PSBN_GBE_MASK |
+ MTK_PHY_DA_RX_PSBN_LP_MASK,
+ lower_idx << 12 | lower_idx << 8 |
+ lower_idx << 4 | lower_idx);
+ phydev_warn(phydev, "TX-VCM SW cal result at low margin 0x%x\n",
+ lower_idx);
+ } else if (upper_idx == TXRESERVE_MAX && upper_ret == 0 &&
+ lower_ret == 0) {
+ ret = 0;
+ phydev_warn(phydev, "TX-VCM SW cal result at high margin 0x%x\n",
+ upper_idx);
+ } else {
+ ret = -EINVAL;
+ }
+
+restore:
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
+ MTK_PHY_RG_ANA_CALEN);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
+ MTK_PHY_RG_TXVOS_CALEN);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG0,
+ MTK_PHY_RG_ZCALEN_A);
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_ANA_CAL_RG1,
+ MTK_PHY_RG_ZCALEN_B | MTK_PHY_RG_ZCALEN_C |
+ MTK_PHY_RG_ZCALEN_D);
+
+ return ret;
+}
+
+static void mt798x_phy_common_finetune(struct phy_device *phydev)
+{
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ /* SlvDSPreadyTime = 24, MasDSPreadyTime = 24 */
+ __phy_write(phydev, 0x11, 0xc71);
+ __phy_write(phydev, 0x12, 0xc);
+ __phy_write(phydev, 0x10, 0x8fae);
+
+ /* EnabRandUpdTrig = 1 */
+ __phy_write(phydev, 0x11, 0x2f00);
+ __phy_write(phydev, 0x12, 0xe);
+ __phy_write(phydev, 0x10, 0x8fb0);
+
+ /* NormMseLoThresh = 85 */
+ __phy_write(phydev, 0x11, 0x55a0);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x83aa);
+
+ /* FfeUpdGainForce = 1(Enable), FfeUpdGainForceVal = 4 */
+ __phy_write(phydev, 0x11, 0x240);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x9680);
+
+ /* TrFreeze = 0 (mt7988 default) */
+ __phy_write(phydev, 0x11, 0x0);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x9686);
+
+ /* SSTrKp100 = 5 */
+ /* SSTrKf100 = 6 */
+ /* SSTrKp1000Mas = 5 */
+ /* SSTrKf1000Mas = 6 */
+ /* SSTrKp1000Slv = 5 */
+ /* SSTrKf1000Slv = 6 */
+ __phy_write(phydev, 0x11, 0xbaef);
+ __phy_write(phydev, 0x12, 0x2e);
+ __phy_write(phydev, 0x10, 0x968c);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+}
+
+static void mt7981_phy_finetune(struct phy_device *phydev)
+{
+ u16 val[8] = { 0x01ce, 0x01c1,
+ 0x020f, 0x0202,
+ 0x03d0, 0x03c0,
+ 0x0013, 0x0005 };
+ int i, k;
+
+ /* 100M eye finetune:
+ * Keep middle level of TX MLT3 shapper as default.
+ * Only change TX MLT3 overshoot level here.
+ */
+ for (k = 0, i = 1; i < 12; i++) {
+ if (i % 3 == 0)
+ continue;
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[k++]);
+ }
+
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ /* ResetSyncOffset = 6 */
+ __phy_write(phydev, 0x11, 0x600);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x8fc0);
+
+ /* VgaDecRate = 1 */
+ __phy_write(phydev, 0x11, 0x4c2a);
+ __phy_write(phydev, 0x12, 0x3e);
+ __phy_write(phydev, 0x10, 0x8fa4);
+
+ /* MrvlTrFix100Kp = 3, MrvlTrFix100Kf = 2,
+ * MrvlTrFix1000Kp = 3, MrvlTrFix1000Kf = 2
+ */
+ __phy_write(phydev, 0x11, 0xd10a);
+ __phy_write(phydev, 0x12, 0x34);
+ __phy_write(phydev, 0x10, 0x8f82);
+
+ /* VcoSlicerThreshBitsHigh */
+ __phy_write(phydev, 0x11, 0x5555);
+ __phy_write(phydev, 0x12, 0x55);
+ __phy_write(phydev, 0x10, 0x8ec0);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 9 */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0x9));
+
+ /* rg_tr_lpf_cnt_val = 512 */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x200);
+
+ /* IIR2 related */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_L, 0x82);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K1_U, 0x0);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_L, 0x103);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K2_U, 0x0);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_L, 0x82);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K3_U, 0x0);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_L, 0xd177);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K4_U, 0x3);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_L, 0x2c82);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LP_IIR2_K5_U, 0xe);
+
+ /* FFE peaking */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27C,
+ MTK_PHY_VGASTATE_FFE_THR_ST1_MASK, 0x1b << 8);
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG27D,
+ MTK_PHY_VGASTATE_FFE_THR_ST2_MASK, 0x1e);
+
+ /* Disable LDO pump */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRAB, 0x0);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_PUMP_EN_PAIRCD, 0x0);
+ /* Adjust LDO output voltage */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_LDO_OUTPUT_V, 0x2222);
+}
+
+static void mt7988_phy_finetune(struct phy_device *phydev)
+{
+ u16 val[12] = { 0x0187, 0x01cd, 0x01c8, 0x0182,
+ 0x020d, 0x0206, 0x0384, 0x03d0,
+ 0x03c6, 0x030a, 0x0011, 0x0005 };
+ int i;
+
+ /* Set default MLT3 shaper first */
+ for (i = 0; i < 12; i++)
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, i, val[i]);
+
+ /* TCT finetune */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_TX_FILTER, 0x5);
+
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ /* ResetSyncOffset = 5 */
+ __phy_write(phydev, 0x11, 0x500);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x8fc0);
+
+ /* VgaDecRate is 1 at default on mt7988 */
+
+ /* MrvlTrFix100Kp = 6, MrvlTrFix100Kf = 7,
+ * MrvlTrFix1000Kp = 6, MrvlTrFix1000Kf = 7
+ */
+ __phy_write(phydev, 0x11, 0xb90a);
+ __phy_write(phydev, 0x12, 0x6f);
+ __phy_write(phydev, 0x10, 0x8f82);
+
+ /* RemAckCntLimitCtrl = 1 */
+ __phy_write(phydev, 0x11, 0xfbba);
+ __phy_write(phydev, 0x12, 0xc3);
+ __phy_write(phydev, 0x10, 0x87f8);
+
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+ /* TR_OPEN_LOOP_EN = 1, lpf_x_average = 10 */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG234,
+ MTK_PHY_TR_OPEN_LOOP_EN_MASK | MTK_PHY_LPF_X_AVERAGE_MASK,
+ BIT(0) | FIELD_PREP(MTK_PHY_LPF_X_AVERAGE_MASK, 0xa));
+
+ /* rg_tr_lpf_cnt_val = 1023 */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_LPF_CNT_VAL, 0x3ff);
+}
+
+static void mt798x_phy_eee(struct phy_device *phydev)
+{
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG120,
+ MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK |
+ MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK,
+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_LO_THRESH1000_MASK, 0x0) |
+ FIELD_PREP(MTK_PHY_LPI_SIG_EN_HI_THRESH1000_MASK, 0x14));
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
+ 0xff));
+
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_TESTMUX_ADC_CTRL,
+ MTK_PHY_RG_TXEN_DIG_MASK);
+
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DEV1E_REG19b, MTK_PHY_BYPASS_DSP_LPI_READY);
+
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_DEV1E_REG234, MTK_PHY_TR_LP_IIR_EEE_EN);
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG238,
+ MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK |
+ MTK_PHY_LPI_SLV_SEND_TX_EN,
+ FIELD_PREP(MTK_PHY_LPI_SLV_SEND_TX_TIMER_MASK, 0x120));
+
+ /* Keep MTK_PHY_LPI_SEND_LOC_TIMER as 375 */
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG239,
+ MTK_PHY_LPI_TXPCS_LOC_RCV);
+
+ /* This also fixes some IoT issues, such as CH340 */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2C7,
+ MTK_PHY_MAX_GAIN_MASK | MTK_PHY_MIN_GAIN_MASK,
+ FIELD_PREP(MTK_PHY_MAX_GAIN_MASK, 0x8) |
+ FIELD_PREP(MTK_PHY_MIN_GAIN_MASK, 0x13));
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG2D1,
+ MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
+ FIELD_PREP(MTK_PHY_VCO_SLICER_THRESH_BITS_HIGH_EEE_MASK,
+ 0x33) |
+ MTK_PHY_LPI_SKIP_SD_SLV_TR | MTK_PHY_LPI_TR_READY |
+ MTK_PHY_LPI_VCO_EEE_STG0_EN);
+
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG323,
+ MTK_PHY_EEE_WAKE_MAS_INT_DC |
+ MTK_PHY_EEE_WAKE_SLV_INT_DC);
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG324,
+ MTK_PHY_SMI_DETCNT_MAX_MASK,
+ FIELD_PREP(MTK_PHY_SMI_DETCNT_MAX_MASK, 0x3f) |
+ MTK_PHY_SMI_DET_MAX_EN);
+
+ phy_set_bits_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RG_DEV1E_REG326,
+ MTK_PHY_LPI_MODE_SD_ON | MTK_PHY_RESET_RANDUPD_CNT |
+ MTK_PHY_TREC_UPDATE_ENAB_CLR |
+ MTK_PHY_LPI_QUIT_WAIT_DFE_SIG_DET_OFF |
+ MTK_PHY_TR_READY_SKIP_AFE_WAKEUP);
+
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ /* Regsigdet_sel_1000 = 0 */
+ __phy_write(phydev, 0x11, 0xb);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x9690);
+
+ /* REG_EEE_st2TrKf1000 = 2 */
+ __phy_write(phydev, 0x11, 0x114f);
+ __phy_write(phydev, 0x12, 0x2);
+ __phy_write(phydev, 0x10, 0x969a);
+
+ /* RegEEE_slv_wake_tr_timer_tar = 6, RegEEE_slv_remtx_timer_tar = 20 */
+ __phy_write(phydev, 0x11, 0x3028);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x969e);
+
+ /* RegEEE_slv_wake_int_timer_tar = 8 */
+ __phy_write(phydev, 0x11, 0x5010);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x96a0);
+
+ /* RegEEE_trfreeze_timer2 = 586 */
+ __phy_write(phydev, 0x11, 0x24a);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x96a8);
+
+ /* RegEEE100Stg1_tar = 16 */
+ __phy_write(phydev, 0x11, 0x3210);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x96b8);
+
+ /* REGEEE_wake_slv_tr_wait_dfesigdet_en = 0 */
+ __phy_write(phydev, 0x11, 0x1463);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x96ca);
+
+ /* DfeTailEnableVgaThresh1000 = 27 */
+ __phy_write(phydev, 0x11, 0x36);
+ __phy_write(phydev, 0x12, 0x0);
+ __phy_write(phydev, 0x10, 0x8f80);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_3);
+ __phy_modify(phydev, MTK_PHY_LPI_REG_14, MTK_PHY_LPI_WAKE_TIMER_1000_MASK,
+ FIELD_PREP(MTK_PHY_LPI_WAKE_TIMER_1000_MASK, 0x19c));
+
+ __phy_modify(phydev, MTK_PHY_LPI_REG_1c, MTK_PHY_SMI_DET_ON_THRESH_MASK,
+ FIELD_PREP(MTK_PHY_SMI_DET_ON_THRESH_MASK, 0xc));
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1,
+ MTK_PHY_RG_LPI_PCS_DSP_CTRL_REG122,
+ MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK,
+ FIELD_PREP(MTK_PHY_LPI_NORM_MSE_HI_THRESH1000_MASK, 0xff));
+}
+
+static int cal_sw(struct phy_device *phydev, enum CAL_ITEM cal_item,
+ u8 start_pair, u8 end_pair)
+{
+ u8 pair_n;
+ int ret;
+
+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
+ /* TX_OFFSET & TX_AMP have no SW calibration. */
+ switch (cal_item) {
+ case TX_VCM:
+ ret = tx_vcm_cal_sw(phydev, pair_n);
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (ret)
+ return ret;
+ }
+ return 0;
+}
+
+static int cal_efuse(struct phy_device *phydev, enum CAL_ITEM cal_item,
+ u8 start_pair, u8 end_pair, u32 *buf)
+{
+ u8 pair_n;
+ int ret;
+
+ for (pair_n = start_pair; pair_n <= end_pair; pair_n++) {
+ /* TX_VCM has no efuse calibration. */
+ switch (cal_item) {
+ case REXT:
+ ret = rext_cal_efuse(phydev, buf);
+ break;
+ case TX_OFFSET:
+ ret = tx_offset_cal_efuse(phydev, buf);
+ break;
+ case TX_AMP:
+ ret = tx_amp_cal_efuse(phydev, buf);
+ break;
+ case TX_R50:
+ ret = tx_r50_cal_efuse(phydev, buf, pair_n);
+ break;
+ default:
+ return -EINVAL;
+ }
+ if (ret)
+ return ret;
+ }
+
+ return 0;
+}
+
+static int start_cal(struct phy_device *phydev, enum CAL_ITEM cal_item,
+ enum CAL_MODE cal_mode, u8 start_pair,
+ u8 end_pair, u32 *buf)
+{
+ int ret;
+
+ switch (cal_mode) {
+ case EFUSE_M:
+ ret = cal_efuse(phydev, cal_item, start_pair,
+ end_pair, buf);
+ break;
+ case SW_M:
+ ret = cal_sw(phydev, cal_item, start_pair, end_pair);
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ if (ret) {
+ phydev_err(phydev, "cal %d failed\n", cal_item);
+ return -EIO;
+ }
+
+ return 0;
+}
+
+static int mt798x_phy_calibration(struct phy_device *phydev)
+{
+ int ret = 0;
+ u32 *buf;
+ size_t len;
+ struct nvmem_cell *cell;
+
+ cell = nvmem_cell_get(&phydev->mdio.dev, "phy-cal-data");
+ if (IS_ERR(cell)) {
+ if (PTR_ERR(cell) == -EPROBE_DEFER)
+ return PTR_ERR(cell);
+ return 0;
+ }
+
+ buf = (u32 *)nvmem_cell_read(cell, &len);
+ if (IS_ERR(buf))
+ return PTR_ERR(buf);
+ nvmem_cell_put(cell);
+
+ if (!buf[0] || !buf[1] || !buf[2] || !buf[3] || len < 4 * sizeof(u32)) {
+ phydev_err(phydev, "invalid efuse data\n");
+ ret = -EINVAL;
+ goto out;
+ }
+
+ ret = start_cal(phydev, REXT, EFUSE_M, NO_PAIR, NO_PAIR, buf);
+ if (ret)
+ goto out;
+ ret = start_cal(phydev, TX_OFFSET, EFUSE_M, NO_PAIR, NO_PAIR, buf);
+ if (ret)
+ goto out;
+ ret = start_cal(phydev, TX_AMP, EFUSE_M, NO_PAIR, NO_PAIR, buf);
+ if (ret)
+ goto out;
+ ret = start_cal(phydev, TX_R50, EFUSE_M, PAIR_A, PAIR_D, buf);
+ if (ret)
+ goto out;
+ ret = start_cal(phydev, TX_VCM, SW_M, PAIR_A, PAIR_A, buf);
+ if (ret)
+ goto out;
+
+out:
+ kfree(buf);
+ return ret;
+}
+
+static int mt798x_phy_config_init(struct phy_device *phydev)
+{
+ switch (phydev->drv->phy_id) {
+ case MTK_GPHY_ID_MT7981:
+ mt7981_phy_finetune(phydev);
+ break;
+ case MTK_GPHY_ID_MT7988:
+ mt7988_phy_finetune(phydev);
+ break;
+ }
+
+ mt798x_phy_common_finetune(phydev);
+ mt798x_phy_eee(phydev);
+
+ return mt798x_phy_calibration(phydev);
+}
+
+static int mt798x_phy_hw_led_on_set(struct phy_device *phydev, u8 index,
+ bool on)
+{
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
+ struct mtk_socphy_priv *priv = phydev->priv;
+ bool changed;
+
+ if (on)
+ changed = !test_and_set_bit(bit_on, &priv->led_state);
+ else
+ changed = !!test_and_clear_bit(bit_on, &priv->led_state);
+
+ changed |= !!test_and_clear_bit(MTK_PHY_LED_STATE_NETDEV +
+ (index ? 16 : 0), &priv->led_state);
+ if (changed)
+ return phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_MASK,
+ on ? MTK_PHY_LED_ON_FORCE_ON : 0);
+ else
+ return 0;
+}
+
+static int mt798x_phy_hw_led_blink_set(struct phy_device *phydev, u8 index,
+ bool blinking)
+{
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
+ struct mtk_socphy_priv *priv = phydev->priv;
+ bool changed;
+
+ if (blinking)
+ changed = !test_and_set_bit(bit_blink, &priv->led_state);
+ else
+ changed = !!test_and_clear_bit(bit_blink, &priv->led_state);
+
+ changed |= !!test_bit(MTK_PHY_LED_STATE_NETDEV +
+ (index ? 16 : 0), &priv->led_state);
+ if (changed)
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_BLINK_CTRL : MTK_PHY_LED0_BLINK_CTRL,
+ blinking ? MTK_PHY_LED_BLINK_FORCE_BLINK : 0);
+ else
+ return 0;
+}
+
+static int mt798x_phy_led_blink_set(struct phy_device *phydev, u8 index,
+ unsigned long *delay_on,
+ unsigned long *delay_off)
+{
+ bool blinking = false;
+ int err = 0;
+
+ if (index > 1)
+ return -EINVAL;
+
+ if (delay_on && delay_off && (*delay_on > 0) && (*delay_off > 0)) {
+ blinking = true;
+ *delay_on = 50;
+ *delay_off = 50;
+ }
+
+ err = mt798x_phy_hw_led_blink_set(phydev, index, blinking);
+ if (err)
+ return err;
+
+ return mt798x_phy_hw_led_on_set(phydev, index, false);
+}
+
+static int mt798x_phy_led_brightness_set(struct phy_device *phydev,
+ u8 index, enum led_brightness value)
+{
+ int err;
+
+ err = mt798x_phy_hw_led_blink_set(phydev, index, false);
+ if (err)
+ return err;
+
+ return mt798x_phy_hw_led_on_set(phydev, index, (value != LED_OFF));
+}
+
+static const unsigned long supported_triggers = (BIT(TRIGGER_NETDEV_FULL_DUPLEX) |
+ BIT(TRIGGER_NETDEV_HALF_DUPLEX) |
+ BIT(TRIGGER_NETDEV_LINK) |
+ BIT(TRIGGER_NETDEV_LINK_10) |
+ BIT(TRIGGER_NETDEV_LINK_100) |
+ BIT(TRIGGER_NETDEV_LINK_1000) |
+ BIT(TRIGGER_NETDEV_RX) |
+ BIT(TRIGGER_NETDEV_TX));
+
+static int mt798x_phy_led_hw_is_supported(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ if (index > 1)
+ return -EINVAL;
+
+ /* All combinations of the supported triggers are allowed */
+ if (rules & ~supported_triggers)
+ return -EOPNOTSUPP;
+
+ return 0;
+};
+
+static int mt798x_phy_led_hw_control_get(struct phy_device *phydev, u8 index,
+ unsigned long *rules)
+{
+ unsigned int bit_blink = MTK_PHY_LED_STATE_FORCE_BLINK + (index ? 16 : 0);
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
+ unsigned int bit_on = MTK_PHY_LED_STATE_FORCE_ON + (index ? 16 : 0);
+ struct mtk_socphy_priv *priv = phydev->priv;
+ int on, blink;
+
+ if (index > 1)
+ return -EINVAL;
+
+ on = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ index ? MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL);
+
+ if (on < 0)
+ return -EIO;
+
+ blink = phy_read_mmd(phydev, MDIO_MMD_VEND2,
+ index ? MTK_PHY_LED1_BLINK_CTRL :
+ MTK_PHY_LED0_BLINK_CTRL);
+ if (blink < 0)
+ return -EIO;
+
+ if ((on & (MTK_PHY_LED_ON_LINK | MTK_PHY_LED_ON_FDX | MTK_PHY_LED_ON_HDX |
+ MTK_PHY_LED_ON_LINKDOWN)) ||
+ (blink & (MTK_PHY_LED_BLINK_RX | MTK_PHY_LED_BLINK_TX)))
+ set_bit(bit_netdev, &priv->led_state);
+ else
+ clear_bit(bit_netdev, &priv->led_state);
+
+ if (on & MTK_PHY_LED_ON_FORCE_ON)
+ set_bit(bit_on, &priv->led_state);
+ else
+ clear_bit(bit_on, &priv->led_state);
+
+ if (blink & MTK_PHY_LED_BLINK_FORCE_BLINK)
+ set_bit(bit_blink, &priv->led_state);
+ else
+ clear_bit(bit_blink, &priv->led_state);
+
+ if (!rules)
+ return 0;
+
+ if (on & MTK_PHY_LED_ON_LINK)
+ *rules |= BIT(TRIGGER_NETDEV_LINK);
+
+ if (on & MTK_PHY_LED_ON_LINK10)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_10);
+
+ if (on & MTK_PHY_LED_ON_LINK100)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_100);
+
+ if (on & MTK_PHY_LED_ON_LINK1000)
+ *rules |= BIT(TRIGGER_NETDEV_LINK_1000);
+
+ if (on & MTK_PHY_LED_ON_FDX)
+ *rules |= BIT(TRIGGER_NETDEV_FULL_DUPLEX);
+
+ if (on & MTK_PHY_LED_ON_HDX)
+ *rules |= BIT(TRIGGER_NETDEV_HALF_DUPLEX);
+
+ if (blink & MTK_PHY_LED_BLINK_RX)
+ *rules |= BIT(TRIGGER_NETDEV_RX);
+
+ if (blink & MTK_PHY_LED_BLINK_TX)
+ *rules |= BIT(TRIGGER_NETDEV_TX);
+
+ return 0;
+};
+
+static int mt798x_phy_led_hw_control_set(struct phy_device *phydev, u8 index,
+ unsigned long rules)
+{
+ unsigned int bit_netdev = MTK_PHY_LED_STATE_NETDEV + (index ? 16 : 0);
+ struct mtk_socphy_priv *priv = phydev->priv;
+ u16 on = 0, blink = 0;
+ int ret;
+
+ if (index > 1)
+ return -EINVAL;
+
+ if (rules & BIT(TRIGGER_NETDEV_FULL_DUPLEX))
+ on |= MTK_PHY_LED_ON_FDX;
+
+ if (rules & BIT(TRIGGER_NETDEV_HALF_DUPLEX))
+ on |= MTK_PHY_LED_ON_HDX;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_10) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK10;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_100) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK100;
+
+ if (rules & (BIT(TRIGGER_NETDEV_LINK_1000) | BIT(TRIGGER_NETDEV_LINK)))
+ on |= MTK_PHY_LED_ON_LINK1000;
+
+ if (rules & BIT(TRIGGER_NETDEV_RX)) {
+ blink |= (on & MTK_PHY_LED_ON_LINK) ?
+ (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100RX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000RX : 0)) :
+ MTK_PHY_LED_BLINK_RX;
+ }
+
+ if (rules & BIT(TRIGGER_NETDEV_TX)) {
+ blink |= (on & MTK_PHY_LED_ON_LINK) ?
+ (((on & MTK_PHY_LED_ON_LINK10) ? MTK_PHY_LED_BLINK_10TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK100) ? MTK_PHY_LED_BLINK_100TX : 0) |
+ ((on & MTK_PHY_LED_ON_LINK1000) ? MTK_PHY_LED_BLINK_1000TX : 0)) :
+ MTK_PHY_LED_BLINK_TX;
+ }
+
+ if (blink || on)
+ set_bit(bit_netdev, &priv->led_state);
+ else
+ clear_bit(bit_netdev, &priv->led_state);
+
+ ret = phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_ON_CTRL :
+ MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_FDX |
+ MTK_PHY_LED_ON_HDX |
+ MTK_PHY_LED_ON_LINK,
+ on);
+
+ if (ret)
+ return ret;
+
+ return phy_write_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_BLINK_CTRL :
+ MTK_PHY_LED0_BLINK_CTRL, blink);
+};
+
+static bool mt7988_phy_led_get_polarity(struct phy_device *phydev, int led_num)
+{
+ struct mtk_socphy_shared *priv = phydev->shared->priv;
+ u32 polarities;
+
+ if (led_num == 0)
+ polarities = ~(priv->boottrap);
+ else
+ polarities = MTK_PHY_LED1_DEFAULT_POLARITIES;
+
+ if (polarities & BIT(phydev->mdio.addr))
+ return true;
+
+ return false;
+}
+
+static int mt7988_phy_fix_leds_polarities(struct phy_device *phydev)
+{
+ struct pinctrl *pinctrl;
+ int index;
+
+ /* Setup LED polarity according to bootstrap use of LED pins */
+ for (index = 0; index < 2; ++index)
+ phy_modify_mmd(phydev, MDIO_MMD_VEND2, index ?
+ MTK_PHY_LED1_ON_CTRL : MTK_PHY_LED0_ON_CTRL,
+ MTK_PHY_LED_ON_POLARITY,
+ mt7988_phy_led_get_polarity(phydev, index) ?
+ MTK_PHY_LED_ON_POLARITY : 0);
+
+ /* Only now setup pinctrl to avoid bogus blinking */
+ pinctrl = devm_pinctrl_get_select(&phydev->mdio.dev, "gbe-led");
+ if (IS_ERR(pinctrl))
+ dev_err(&phydev->mdio.bus->dev, "Failed to setup PHY LED pinctrl\n");
+
+ return 0;
+}
+
+static int mt7988_phy_probe_shared(struct phy_device *phydev)
+{
+ struct device_node *np = dev_of_node(&phydev->mdio.bus->dev);
+ struct mtk_socphy_shared *shared = phydev->shared->priv;
+ struct regmap *regmap;
+ u32 reg;
+ int ret;
+
+ /* The LED0 of the 4 PHYs in MT7988 are wired to SoC pins LED_A, LED_B,
+ * LED_C and LED_D respectively. At the same time those pins are used to
+ * bootstrap configuration of the reference clock source (LED_A),
+ * DRAM DDRx16b x2/x1 (LED_B) and boot device (LED_C, LED_D).
+ * In practise this is done using a LED and a resistor pulling the pin
+ * either to GND or to VIO.
+ * The detected value at boot time is accessible at run-time using the
+ * TPBANK0 register located in the gpio base of the pinctrl, in order
+ * to read it here it needs to be referenced by a phandle called
+ * 'mediatek,pio' in the MDIO bus hosting the PHY.
+ * The 4 bits in TPBANK0 are kept as package shared data and are used to
+ * set LED polarity for each of the LED0.
+ */
+ regmap = syscon_regmap_lookup_by_phandle(np, "mediatek,pio");
+ if (IS_ERR(regmap))
+ return PTR_ERR(regmap);
+
+ ret = regmap_read(regmap, RG_GPIO_MISC_TPBANK0, &reg);
+ if (ret)
+ return ret;
+
+ shared->boottrap = FIELD_GET(RG_GPIO_MISC_TPBANK0_BOOTMODE, reg);
+
+ return 0;
+}
+
+static void mt798x_phy_leds_state_init(struct phy_device *phydev)
+{
+ int i;
+
+ for (i = 0; i < 2; ++i)
+ mt798x_phy_led_hw_control_get(phydev, i, NULL);
+}
+
+static int mt7988_phy_probe(struct phy_device *phydev)
+{
+ struct mtk_socphy_shared *shared;
+ struct mtk_socphy_priv *priv;
+ int err;
+
+ if (phydev->mdio.addr > 3)
+ return -EINVAL;
+
+ err = devm_phy_package_join(&phydev->mdio.dev, phydev, 0,
+ sizeof(struct mtk_socphy_shared));
+ if (err)
+ return err;
+
+ if (phy_package_probe_once(phydev)) {
+ err = mt7988_phy_probe_shared(phydev);
+ if (err)
+ return err;
+ }
+
+ shared = phydev->shared->priv;
+ priv = &shared->priv[phydev->mdio.addr];
+
+ phydev->priv = priv;
+
+ mt798x_phy_leds_state_init(phydev);
+
+ err = mt7988_phy_fix_leds_polarities(phydev);
+ if (err)
+ return err;
+
+ /* Disable TX power saving at probing to:
+ * 1. Meet common mode compliance test criteria
+ * 2. Make sure that TX-VCM calibration works fine
+ */
+ phy_modify_mmd(phydev, MDIO_MMD_VEND1, MTK_PHY_RXADC_CTRL_RG7,
+ MTK_PHY_DA_AD_BUF_BIAS_LP_MASK, 0x3 << 8);
+
+ return mt798x_phy_calibration(phydev);
+}
+
+static int mt7981_phy_probe(struct phy_device *phydev)
+{
+ struct mtk_socphy_priv *priv;
+
+ priv = devm_kzalloc(&phydev->mdio.dev, sizeof(struct mtk_socphy_priv),
+ GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ phydev->priv = priv;
+
+ mt798x_phy_leds_state_init(phydev);
+
+ return mt798x_phy_calibration(phydev);
+}
+
+static struct phy_driver mtk_socphy_driver[] = {
+ {
+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981),
+ .name = "MediaTek MT7981 PHY",
+ .config_init = mt798x_phy_config_init,
+ .config_intr = genphy_no_config_intr,
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
+ .probe = mt7981_phy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_socphy_read_page,
+ .write_page = mtk_socphy_write_page,
+ .led_blink_set = mt798x_phy_led_blink_set,
+ .led_brightness_set = mt798x_phy_led_brightness_set,
+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
+ .led_hw_control_set = mt798x_phy_led_hw_control_set,
+ .led_hw_control_get = mt798x_phy_led_hw_control_get,
+ },
+ {
+ PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988),
+ .name = "MediaTek MT7988 PHY",
+ .config_init = mt798x_phy_config_init,
+ .config_intr = genphy_no_config_intr,
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
+ .probe = mt7988_phy_probe,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_socphy_read_page,
+ .write_page = mtk_socphy_write_page,
+ .led_blink_set = mt798x_phy_led_blink_set,
+ .led_brightness_set = mt798x_phy_led_brightness_set,
+ .led_hw_is_supported = mt798x_phy_led_hw_is_supported,
+ .led_hw_control_set = mt798x_phy_led_hw_control_set,
+ .led_hw_control_get = mt798x_phy_led_hw_control_get,
+ },
+};
+
+module_phy_driver(mtk_socphy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_socphy_tbl[] = {
+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7981) },
+ { PHY_ID_MATCH_EXACT(MTK_GPHY_ID_MT7988) },
+ { }
+};
+
+MODULE_DESCRIPTION("MediaTek SoC Gigabit Ethernet PHY driver");
+MODULE_AUTHOR("Daniel Golle <daniel@makrotopia.org>");
+MODULE_AUTHOR("SkyLake Huang <SkyLake.Huang@mediatek.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_socphy_tbl);
--- /dev/null
+++ b/drivers/net/phy/mediatek/mtk-ge.c
@@ -0,0 +1,148 @@
+// SPDX-License-Identifier: GPL-2.0+
+#include <linux/of.h>
+#include <linux/bitfield.h>
+#include <linux/module.h>
+#include <linux/phy.h>
+
+#define MTK_EXT_PAGE_ACCESS 0x1f
+#define MTK_PHY_PAGE_STANDARD 0x0000
+#define MTK_PHY_PAGE_EXTENDED 0x0001
+#define MTK_PHY_PAGE_EXTENDED_2 0x0002
+#define MTK_PHY_PAGE_EXTENDED_3 0x0003
+#define MTK_PHY_PAGE_EXTENDED_2A30 0x2a30
+#define MTK_PHY_PAGE_EXTENDED_52B5 0x52b5
+
+static int mtk_gephy_read_page(struct phy_device *phydev)
+{
+ return __phy_read(phydev, MTK_EXT_PAGE_ACCESS);
+}
+
+static int mtk_gephy_write_page(struct phy_device *phydev, int page)
+{
+ return __phy_write(phydev, MTK_EXT_PAGE_ACCESS, page);
+}
+
+static void mtk_gephy_config_init(struct phy_device *phydev)
+{
+ /* Disable EEE */
+ phy_write_mmd(phydev, MDIO_MMD_AN, MDIO_AN_EEE_ADV, 0);
+
+ /* Enable HW auto downshift */
+ phy_modify_paged(phydev, MTK_PHY_PAGE_EXTENDED, 0x14, 0, BIT(4));
+
+ /* Increase SlvDPSready time */
+ phy_select_page(phydev, MTK_PHY_PAGE_EXTENDED_52B5);
+ __phy_write(phydev, 0x10, 0xafae);
+ __phy_write(phydev, 0x12, 0x2f);
+ __phy_write(phydev, 0x10, 0x8fae);
+ phy_restore_page(phydev, MTK_PHY_PAGE_STANDARD, 0);
+
+ /* Adjust 100_mse_threshold */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x123, 0xffff);
+
+ /* Disable mcc */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0xa6, 0x300);
+}
+
+static int mt7530_phy_config_init(struct phy_device *phydev)
+{
+ mtk_gephy_config_init(phydev);
+
+ /* Increase post_update_timer */
+ phy_write_paged(phydev, MTK_PHY_PAGE_EXTENDED_3, 0x11, 0x4b);
+
+ return 0;
+}
+
+static int mt7530_led_config_of(struct phy_device *phydev)
+{
+ struct device_node *np = phydev->mdio.dev.of_node;
+ const __be32 *paddr;
+ int len;
+ int i;
+
+ paddr = of_get_property(np, "mediatek,led-config", &len);
+ if (!paddr)
+ return 0;
+
+ if (len < (2 * sizeof(*paddr)))
+ return -EINVAL;
+
+ len /= sizeof(*paddr);
+
+ phydev_warn(phydev, "Configure LED registers (num=%d)\n", len);
+ for (i = 0; i < len - 1; i += 2) {
+ u32 reg;
+ u32 val;
+
+ reg = be32_to_cpup(paddr + i);
+ val = be32_to_cpup(paddr + i + 1);
+
+ phy_write_mmd(phydev, MDIO_MMD_VEND2, reg, val);
+ }
+
+ return 0;
+}
+
+static int mt7531_phy_config_init(struct phy_device *phydev)
+{
+ mtk_gephy_config_init(phydev);
+
+ /* PHY link down power saving enable */
+ phy_set_bits(phydev, 0x17, BIT(4));
+ phy_clear_bits_mmd(phydev, MDIO_MMD_VEND1, 0xc6, 0x300);
+
+ /* Set TX Pair delay selection */
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x13, 0x404);
+ phy_write_mmd(phydev, MDIO_MMD_VEND1, 0x14, 0x404);
+
+ /* LED Config*/
+ mt7530_led_config_of(phydev);
+
+ return 0;
+}
+
+static struct phy_driver mtk_gephy_driver[] = {
+ {
+ PHY_ID_MATCH_EXACT(0x03a29412),
+ .name = "MediaTek MT7530 PHY",
+ .config_init = mt7530_phy_config_init,
+ /* Interrupts are handled by the switch, not the PHY
+ * itself.
+ */
+ .config_intr = genphy_no_config_intr,
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_gephy_read_page,
+ .write_page = mtk_gephy_write_page,
+ },
+ {
+ PHY_ID_MATCH_EXACT(0x03a29441),
+ .name = "MediaTek MT7531 PHY",
+ .config_init = mt7531_phy_config_init,
+ /* Interrupts are handled by the switch, not the PHY
+ * itself.
+ */
+ .config_intr = genphy_no_config_intr,
+ .handle_interrupt = genphy_handle_interrupt_no_ack,
+ .suspend = genphy_suspend,
+ .resume = genphy_resume,
+ .read_page = mtk_gephy_read_page,
+ .write_page = mtk_gephy_write_page,
+ },
+};
+
+module_phy_driver(mtk_gephy_driver);
+
+static struct mdio_device_id __maybe_unused mtk_gephy_tbl[] = {
+ { PHY_ID_MATCH_EXACT(0x03a29441) },
+ { PHY_ID_MATCH_EXACT(0x03a29412) },
+ { }
+};
+
+MODULE_DESCRIPTION("MediaTek Gigabit Ethernet PHY driver");
+MODULE_AUTHOR("DENG, Qingfang <dqfext@gmail.com>");
+MODULE_LICENSE("GPL");
+
+MODULE_DEVICE_TABLE(mdio, mtk_gephy_tbl);