mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
355 lines
6.7 KiB
Plaintext
355 lines
6.7 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
#include <dt-bindings/gpio/gpio.h>
|
|
#include <dt-bindings/input/input.h>
|
|
#include <dt-bindings/pinctrl/mt65xx.h>
|
|
|
|
#include "mt7986a.dtsi"
|
|
|
|
/ {
|
|
model = "GL.iNet GL-MT6000";
|
|
compatible = "glinet,gl-mt6000", "mediatek,mt7986a";
|
|
|
|
aliases {
|
|
serial0 = &uart0;
|
|
label-mac-device = &gmac1;
|
|
led-boot = &led_blue;
|
|
led-failsafe = &led_blue;
|
|
led-running = &led_white;
|
|
led-upgrade = &led_white;
|
|
};
|
|
|
|
chosen {
|
|
stdout-path = "serial0:115200n8";
|
|
bootargs-append = " root=PARTLABEL=rootfs rootwait";
|
|
};
|
|
|
|
reg_1p8v: regulator-1p8v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "1.8vd";
|
|
regulator-min-microvolt = <1800000>;
|
|
regulator-max-microvolt = <1800000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
reg_3p3v: regulator-3p3v {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "fixed-3.3V";
|
|
regulator-min-microvolt = <3300000>;
|
|
regulator-max-microvolt = <3300000>;
|
|
regulator-boot-on;
|
|
regulator-always-on;
|
|
};
|
|
|
|
keys {
|
|
compatible = "gpio-keys";
|
|
|
|
reset {
|
|
label = "reset";
|
|
linux,code = <KEY_RESTART>;
|
|
gpios = <&pio 9 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
leds {
|
|
compatible = "gpio-leds";
|
|
|
|
led_blue: led@0 {
|
|
label = "blue:run";
|
|
gpios = <&pio 38 GPIO_ACTIVE_LOW>;
|
|
};
|
|
|
|
led_white: led@1 {
|
|
label = "white:system";
|
|
gpios = <&pio 37 GPIO_ACTIVE_LOW>;
|
|
};
|
|
};
|
|
|
|
usb_vbus: regulator-usb-vbus {
|
|
compatible = "regulator-fixed";
|
|
regulator-name = "usb_vbus";
|
|
regulator-min-microvolt = <5000000>;
|
|
regulator-max-microvolt = <5000000>;
|
|
gpios = <&pio 24 GPIO_ACTIVE_HIGH>;
|
|
enable-active-high;
|
|
regulator-boot-on;
|
|
};
|
|
};
|
|
|
|
ð {
|
|
status = "okay";
|
|
|
|
gmac0: mac@0 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <0>;
|
|
phy-mode = "2500base-x";
|
|
nvmem-cells = <&macaddr_factory_a 2>;
|
|
nvmem-cell-names = "mac-address";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
|
|
gmac1: mac@1 {
|
|
compatible = "mediatek,eth-mac";
|
|
reg = <1>;
|
|
nvmem-cells = <&macaddr_factory_a 0>;
|
|
nvmem-cell-names = "mac-address";
|
|
phy-mode = "2500base-x";
|
|
phy-handle = <&phy1>;
|
|
};
|
|
|
|
mdio: mdio-bus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
phy1: phy@1 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <1>;
|
|
reset-assert-us = <100000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&pio 10 GPIO_ACTIVE_LOW>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <46 IRQ_TYPE_LEVEL_LOW>;
|
|
realtek,aldps-enable;
|
|
};
|
|
|
|
phy7: ethernet-phy@7 {
|
|
compatible = "ethernet-phy-ieee802.3-c45";
|
|
reg = <7>;
|
|
reset-assert-us = <100000>;
|
|
reset-deassert-us = <100000>;
|
|
reset-gpios = <&pio 19 GPIO_ACTIVE_LOW>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <47 IRQ_TYPE_LEVEL_LOW>;
|
|
realtek,aldps-enable;
|
|
};
|
|
|
|
switch: switch@1f {
|
|
compatible = "mediatek,mt7531";
|
|
reg = <31>;
|
|
reset-gpios = <&pio 18 GPIO_ACTIVE_HIGH>;
|
|
interrupt-controller;
|
|
#interrupt-cells = <1>;
|
|
interrupt-parent = <&pio>;
|
|
interrupts = <66 IRQ_TYPE_LEVEL_HIGH>;
|
|
|
|
ports {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
|
|
port@0 {
|
|
reg = <0>;
|
|
label = "lan2";
|
|
};
|
|
|
|
port@1 {
|
|
reg = <1>;
|
|
label = "lan3";
|
|
};
|
|
|
|
port@2 {
|
|
reg = <2>;
|
|
label = "lan4";
|
|
};
|
|
|
|
port@3 {
|
|
reg = <3>;
|
|
label = "lan5";
|
|
};
|
|
|
|
port@5 {
|
|
reg = <5>;
|
|
label = "lan1";
|
|
phy-handle = <&phy7>;
|
|
phy-mode = "2500base-x";
|
|
};
|
|
|
|
port@6 {
|
|
reg = <6>;
|
|
ethernet = <&gmac0>;
|
|
phy-mode = "2500base-x";
|
|
|
|
fixed-link {
|
|
speed = <2500>;
|
|
full-duplex;
|
|
pause;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
|
|
&pio {
|
|
wf_2g_5g_pins: wf_2g_5g-pins {
|
|
mux {
|
|
function = "wifi";
|
|
groups = "wf_2g", "wf_5g";
|
|
};
|
|
conf {
|
|
pins = "WF0_HB1", "WF0_HB2", "WF0_HB3", "WF0_HB4",
|
|
"WF0_HB0", "WF0_HB0_B", "WF0_HB5", "WF0_HB6",
|
|
"WF0_HB7", "WF0_HB8", "WF0_HB9", "WF0_HB10",
|
|
"WF0_TOP_CLK", "WF0_TOP_DATA", "WF1_HB1",
|
|
"WF1_HB2", "WF1_HB3", "WF1_HB4", "WF1_HB0",
|
|
"WF1_HB5", "WF1_HB6", "WF1_HB7", "WF1_HB8",
|
|
"WF1_TOP_CLK", "WF1_TOP_DATA";
|
|
drive-strength = <4>;
|
|
};
|
|
};
|
|
|
|
mmc0_pins_default: mmc0-pins {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
};
|
|
|
|
mmc0_pins_uhs: mmc0-uhs-pins {
|
|
mux {
|
|
function = "emmc";
|
|
groups = "emmc_51";
|
|
};
|
|
conf-cmd-dat {
|
|
pins = "EMMC_DATA_0", "EMMC_DATA_1", "EMMC_DATA_2",
|
|
"EMMC_DATA_3", "EMMC_DATA_4", "EMMC_DATA_5",
|
|
"EMMC_DATA_6", "EMMC_DATA_7", "EMMC_CMD";
|
|
input-enable;
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
conf-clk {
|
|
pins = "EMMC_CK";
|
|
drive-strength = <6>;
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-ds {
|
|
pins = "EMMC_DSL";
|
|
mediatek,pull-down-adv = <2>; /* pull-down 50K */
|
|
};
|
|
conf-rst {
|
|
pins = "EMMC_RSTB";
|
|
drive-strength = <4>;
|
|
mediatek,pull-up-adv = <1>; /* pull-up 10K */
|
|
};
|
|
};
|
|
};
|
|
|
|
&crypto {
|
|
status = "okay";
|
|
};
|
|
|
|
&ssusb {
|
|
vusb33-supply = <®_3p3v>;
|
|
vbus-supply = <&usb_vbus>;
|
|
status = "okay";
|
|
};
|
|
|
|
&trng {
|
|
status = "okay";
|
|
};
|
|
|
|
&uart0 {
|
|
status = "okay";
|
|
};
|
|
|
|
&usb_phy {
|
|
status = "okay";
|
|
};
|
|
|
|
&watchdog {
|
|
status = "okay";
|
|
};
|
|
|
|
&wifi {
|
|
nvmem-cells = <&eeprom_factory_0>;
|
|
nvmem-cell-names = "eeprom";
|
|
pinctrl-names = "default";
|
|
pinctrl-0 = <&wf_2g_5g_pins>;
|
|
status = "okay";
|
|
};
|
|
|
|
&mmc0 {
|
|
pinctrl-names = "default", "state_uhs";
|
|
pinctrl-0 = <&mmc0_pins_default>;
|
|
pinctrl-1 = <&mmc0_pins_uhs>;
|
|
bus-width = <8>;
|
|
max-frequency = <200000000>;
|
|
cap-mmc-highspeed;
|
|
mmc-hs200-1_8v;
|
|
mmc-hs400-1_8v;
|
|
hs400-ds-delay = <0x14014>;
|
|
vmmc-supply = <®_3p3v>;
|
|
vqmmc-supply = <®_1p8v>;
|
|
non-removable;
|
|
no-sd;
|
|
no-sdio;
|
|
status = "okay";
|
|
|
|
card@0 {
|
|
compatible = "mmc-card";
|
|
reg = <0>;
|
|
|
|
block {
|
|
compatible = "block-device";
|
|
partitions {
|
|
block-partition-env {
|
|
partname = "u-boot-env";
|
|
|
|
nvmem-layout {
|
|
compatible = "u-boot,env";
|
|
};
|
|
};
|
|
|
|
block-partition-factory {
|
|
partname = "factory";
|
|
|
|
nvmem-layout {
|
|
compatible = "fixed-layout";
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
eeprom_factory_0: eeprom@0 {
|
|
reg = <0x0 0x1000>;
|
|
};
|
|
|
|
macaddr_factory_a: macaddr@a {
|
|
compatible = "mac-base";
|
|
reg = <0xa 0x6>;
|
|
#nvmem-cell-cells = <1>;
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|
|
};
|