mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 02:29:01 +00:00
0de230bd0c
This patch adds "dts-5.10" directory to use backported drivers. There are several specification changes in the new drivers, so there are some compatibility issues in using dts/dtsi files for 5.4. The old DTS files are moved to "dts-5.4", so their corresponding kernel version is obvious as well. Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com> [change "dts" to "dts-5.4", adjust Makefile] Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
183 lines
3.2 KiB
Plaintext
183 lines
3.2 KiB
Plaintext
// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
|
|
|
|
/dts-v1/;
|
|
|
|
#define STRINGIZE(s) #s
|
|
#define LAN_LABEL(p, s) STRINGIZE(p ## s)
|
|
#define SWITCH_PORT_LABEL(n) LAN_LABEL(lan, n)
|
|
|
|
#define INTERNAL_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
reg = <##n>; \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
phy-is-integrated; \
|
|
};
|
|
|
|
#define EXTERNAL_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
reg = <##n>; \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
};
|
|
|
|
#define EXTERNAL_SFP_PHY(n) \
|
|
phy##n: ethernet-phy@##n { \
|
|
compatible = "ethernet-phy-ieee802.3-c22"; \
|
|
sfp; \
|
|
media = "fibre"; \
|
|
reg = <##n>; \
|
|
};
|
|
|
|
#define SWITCH_PORT(n, s, m) \
|
|
port@##n { \
|
|
reg = <##n>; \
|
|
label = SWITCH_PORT_LABEL(s) ; \
|
|
phy-handle = <&phy##n>; \
|
|
phy-mode = #m ; \
|
|
};
|
|
|
|
#define SWITCH_SFP_PORT(n, s, m) \
|
|
port@##n { \
|
|
reg = <##n>; \
|
|
label = SWITCH_PORT_LABEL(s) ; \
|
|
phy-handle = <&phy##n>; \
|
|
phy-mode = #m ; \
|
|
fixed-link { \
|
|
speed = <1000>; \
|
|
full-duplex; \
|
|
}; \
|
|
};
|
|
|
|
/ {
|
|
#address-cells = <1>;
|
|
#size-cells = <1>;
|
|
|
|
compatible = "realtek,rtl838x-soc";
|
|
|
|
cpus {
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
frequency = <800000000>;
|
|
|
|
cpu@0 {
|
|
compatible = "mips,mips34Kc";
|
|
reg = <0>;
|
|
};
|
|
};
|
|
|
|
memory@0 {
|
|
device_type = "memory";
|
|
reg = <0x0 0x8000000>;
|
|
};
|
|
|
|
chosen {
|
|
bootargs = "console=ttyS0,38400";
|
|
};
|
|
|
|
cpuintc: cpuintc {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "mti,cpu-interrupt-controller";
|
|
};
|
|
|
|
intc: rtlintc {
|
|
#address-cells = <0>;
|
|
#interrupt-cells = <1>;
|
|
interrupt-controller;
|
|
compatible = "realtek,rt9300-intc";
|
|
reg = <0xb8003000 0x20>;
|
|
};
|
|
|
|
osc: oscillator {
|
|
compatible = "fixed-clock";
|
|
#clock-cells = <1>;
|
|
clock-frequency = <175000000>;
|
|
clock-output-names = "osc";
|
|
};
|
|
|
|
timer: timer@b8003200 {
|
|
compatible = "realtek,rtl9300-timer";
|
|
reg = <0xb8003200 0x60>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <8>;
|
|
interrupt-names = "ostimer";
|
|
clocks = <&osc 0>;
|
|
};
|
|
|
|
spi0: spi@b8001200 {
|
|
status = "okay";
|
|
|
|
compatible = "realtek,rtl838x-nor";
|
|
reg = <0xb8001200 0x100>;
|
|
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
};
|
|
|
|
uart0: uart@b8002000 {
|
|
compatible = "ns16550a";
|
|
reg = <0xb8002000 0x100>;
|
|
|
|
clock-frequency = <175000000>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <30>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
uart1: uart@b8002100 {
|
|
compatible = "ns16550a";
|
|
reg = <0xb8002100 0x100>;
|
|
|
|
clock-frequency = <175000000>;
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <31>;
|
|
|
|
reg-io-width = <1>;
|
|
reg-shift = <2>;
|
|
fifo-size = <1>;
|
|
no-loopback-test;
|
|
|
|
status = "okay";
|
|
};
|
|
|
|
gpio0: gpio-controller@b8003500 {
|
|
compatible = "realtek,rtl838x-gpio";
|
|
reg = <0xb8003500 0x20>;
|
|
gpio-controller;
|
|
#gpio-cells = <2>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <31>;
|
|
};
|
|
|
|
ethernet0: ethernet@bb00a300 {
|
|
status = "okay";
|
|
compatible = "realtek,rtl838x-eth";
|
|
reg = <0xbb00a300 0x100>;
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <24>;
|
|
#interrupt-cells = <1>;
|
|
phy-mode = "internal";
|
|
fixed-link {
|
|
speed = <1000>;
|
|
full-duplex;
|
|
};
|
|
};
|
|
|
|
switch0: switch@bb000000 {
|
|
status = "okay";
|
|
|
|
interrupt-parent = <&intc>;
|
|
interrupts = <20>;
|
|
|
|
compatible = "realtek,rtl83xx-switch";
|
|
};
|
|
};
|