openwrt/target/linux/ath79/dts/ar1022_sitecom_wlr-7100.dts
Shiji Yang 0db4f9785c
ath79: convert ath10k calibration data to NVMEM (ASCII MAC)
This patch converts ath10k calibration data to NVMEM format for
wave 1 devices with mtd ASCII MAC address. The "calibration"
NVMEM cell size is 0x844. All unportable MAC address settings
have been moved to '10_fix_wifi_mac' scripts.

Signed-off-by: Shiji Yang <yangshiji66@qq.com>
2024-02-01 17:09:03 +01:00

180 lines
2.8 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "ar9344.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "Sitecom WLR-7100 (X7 AC1200)";
compatible = "sitecom,wlr-7100", "qca,ar9344";
aliases {
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
wlan2g {
label = "2.4GHz";
gpios = <&gpio 16 GPIO_ACTIVE_LOW>;
linux,code = <KEY_RESTART>;
};
wlan5g {
label = "5GHz";
gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
linux,code = <KEY_WPS_BUTTON>;
};
};
leds {
compatible = "gpio-leds";
ops {
label = "white:ops";
gpios = <&gpio 12 GPIO_ACTIVE_LOW>;
};
led_power: power {
label = "amber:power";
gpios = <&gpio 2 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio 14 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
};
};
&eth0 {
status = "okay";
pll-data = <0x06000000 0x00000101 0x00001616>;
phy-mode = "rgmii";
phy-handle = <&phy0>;
gmac-config {
device = <&gmac>;
rgmii-gmac0 = <1>;
rxdv-delay = <3>;
rxd-delay = <3>;
};
};
&mdio0 {
status = "okay";
phy0: ethernet-phy@0 {
reg = <0>;
phy-mode = "rgmii";
qca,ar8327-initvals = <
0x04 0x87a00000 /* PORT0 PAD Mode */
0x0c 0x01000000 /* PORT6 PAD Mode */
0x10 0x80000000 /* PWS_REG_VALUE */
0x7c 0x000000fe /* PORT0_STATUS */
0x94 0x000000fe /* PORT6_STATUS */
>;
};
};
&pcie {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0x0000 0 0 0 0>;
nvmem-cells = <&cal_art_5000>;
nvmem-cell-names = "calibration";
};
};
&ref {
clock-frequency = <25000000>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x030000>;
read-only;
};
uenv: partition@30000 {
label = "u-boot-env";
reg = <0x030000 0x010000>;
read-only;
};
partition@40000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x040000 0x750000>;
};
partition@790000 {
label = "backup";
reg = <0x790000 0x010000>;
read-only;
};
partition@7a0000 {
label = "storage";
reg = <0x7a0000 0x050000>;
read-only;
};
art: partition@7f0000 {
label = "art";
reg = <0x7f0000 0x010000>;
read-only;
nvmem-layout {
compatible = "fixed-layout";
#address-cells = <1>;
#size-cells = <1>;
cal_art_5000: calibration@5000 {
reg = <0x5000 0x844>;
};
};
};
};
};
};
&usb {
status = "okay";
};
&usb_phy {
status = "okay";
};
&wmac {
status = "okay";
qca,no-eeprom;
};