openwrt/target/linux/brcm63xx/patches-4.1/505-board_spw500v.patch
Jonas Gorski 3a9e4ba896 brcm63xx: unbreak board_probe_switch again
Also move it to an earlier place so new boards added are less likely
to confuse quilt.

Fixes #19965.

Signed-off-by: Jonas Gorski <jogo@openwrt.org>

SVN-Revision: 46148
2015-06-30 23:26:02 +00:00

65 lines
1.6 KiB
Diff

--- a/arch/mips/bcm63xx/boards/board_bcm963xx.c
+++ b/arch/mips/bcm63xx/boards/board_bcm963xx.c
@@ -572,6 +572,45 @@ static struct board_info __initdata boar
.force_duplex_full = 1,
},
};
+
+static struct sprom_fixup __initdata spw500v_fixups[] = {
+ { .offset = 46, .value = 0x3046 },
+ { .offset = 47, .value = 0x15a7 },
+ { .offset = 48, .value = 0xfa89 },
+ { .offset = 49, .value = 0xfe79 },
+ { .offset = 57, .value = 0x6a49 },
+};
+
+static struct board_info __initdata board_spw500v = {
+ .name = "SPW500V",
+ .expected_cpu_id = 0x6348,
+
+ .has_uart0 = 1,
+ .has_enet0 = 1,
+ .has_pci = 1,
+ .use_fallback_sprom = 1,
+
+ .enet0 = {
+ .has_phy = 1,
+ .use_internal_phy = 1,
+ },
+
+ .has_dsp = 1,
+ .dsp = {
+ .gpio_rst = 6,
+ .gpio_int = 34,
+ .ext_irq = 2,
+ .cs = 2,
+ },
+
+ .fallback_sprom = {
+ .type = SPROM_BCM4318,
+ .pci_bus = 0,
+ .pci_dev = 1,
+ .board_fixups = spw500v_fixups,
+ .num_board_fixups = ARRAY_SIZE(spw500v_fixups),
+ },
+};
#endif /* CONFIG_BCM63XX_CPU_6348 */
/*
@@ -856,6 +895,7 @@ static const struct board_info __initcon
&board_96348gw_a,
&board_rta1025w_16,
&board_96348_D4PW,
+ &board_spw500v,
#endif
#ifdef CONFIG_BCM63XX_CPU_6358
@@ -897,6 +937,7 @@ static struct of_device_id const bcm963x
{ .compatible = "dynalink,rta1025w", .data = &board_rta1025w_16, },
{ .compatible = "netgear,dg834gtpn", .data = &board_96348gw_10, },
{ .compatible = "sagem,f@st2404", .data = &board_FAST2404, },
+ { .compatible = "t-com,spw500v", .data = &board_spw500v, },
{ .compatible = "tp-link,td-w8900gb", .data = &board_96348gw_11, },
{ .compatible = "usr,9108", .data = &board_96348gw_a, },
#endif