mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
16b01fb1b9
Hardware
--------
SoC: NXP P1020 (2x e500 @ 800MHz)
RAM: 256M DDR3 (Micron)
FLASH: 32M NOR (Spansion S29GL128S)
BTN: 1x Reset
WiFi: 1x Atheros AR9590 2.4 bgn 3x3
2x Atheros AR9590 5.0 an 3x3
ETH: 1x Gigabit Ethernet (Atheros AR8033)
LED: System (green/red) - Radio{0,1} (green)
LAN (connected to PHY)
- GE blue
- FE green
Serial is a Cisco-compatible RJ45 next to the ethernet port.
115200-N-8 are the settings for OS and U-Boot.
Installation
------------
1. Grab the OpenWrt initramfs, rename it to 01C8A8C0.img. Place it in
the root directory of a TFTP server and serve it at
192.168.200.200/24.
2. Connect to the serial port and boot the AP. Stop autoboot in U-Boot
by pressing Enter when prompted. Credentials are identical to the one
in the APs interface. By default it is admin / new2day.
3. Set the bootcmd so the AP can boot OpenWrt by executing
$ setenv boot_openwrt "setenv bootargs;
cp.b 0xee000000 0x1000000 0x1000000; bootm 0x1000000"
$ setenv bootcmd "run boot_openwrt"
$ saveenv
If you plan on going back to the vendor firmware - the bootcmd for it
is stored in the boot_flash variable.
4. Load the initramfs image to RAM and boot by executing
$ tftpboot 0x1000000 192.168.200.200:01C8A8C0.img; bootm
5. Make a backup of the "firmware" partition if you ever wish to go back
to the vendor firmware.
6. Upload the OpenWrt sysupgrade image via SCP to the devices /tmp
folder.
7. Flash OpenWrt using sysupgrade.
$ sysupgrade -n /tmp/openwrt-sysupgrade.bin
Signed-off-by: David Bauer <mail@david-bauer.net>
152 lines
4.6 KiB
Makefile
152 lines
4.6 KiB
Makefile
#
|
|
# This is free software, licensed under the GNU General Public License v2.
|
|
# See /LICENSE for more information.
|
|
#
|
|
include $(TOPDIR)/rules.mk
|
|
include $(INCLUDE_DIR)/image.mk
|
|
|
|
DEVICE_VARS += TPLINK_HWID TPLINK_HWREV TPLINK_FLASHLAYOUT
|
|
|
|
define rootfs_align
|
|
$(patsubst %-256k,0x40000,$(patsubst %-128k,0x20000,$(patsubst %-64k,0x10000,$(patsubst squashfs%,0x4,$(patsubst root.%,%,$(1))))))
|
|
endef
|
|
|
|
define Build/copy-file
|
|
cat "$(1)" > "$@"
|
|
endef
|
|
|
|
# combine kernel and rootfs into one image
|
|
# mktplinkfw <type> <optional extra arguments to mktplinkfw binary>
|
|
# <type> is "sysupgrade" or "factory"
|
|
#
|
|
# -a align the rootfs start on an <align> bytes boundary
|
|
# -j add jffs2 end-of-filesystem markers
|
|
# -s strip padding from end of the image
|
|
# -X reserve <size> bytes in the firmware image (hexval prefixed with 0x)
|
|
define Build/mktplinkfw
|
|
-$(STAGING_DIR_HOST)/bin/mktplinkfw \
|
|
-H $(TPLINK_HWID) -W $(TPLINK_HWREV) -F $(TPLINK_FLASHLAYOUT) -N OpenWrt -V $(REVISION) \
|
|
-k $(IMAGE_KERNEL) \
|
|
-r $@ \
|
|
-o $@.new \
|
|
-j -X 0x40000 \
|
|
-a $(call rootfs_align,$(FILESYSTEM)) \
|
|
$(wordlist 2,$(words $(1)),$(1)) \
|
|
$(if $(findstring sysupgrade,$(word 1,$(1))),-s) && mv $@.new $@ || rm -f $@
|
|
endef
|
|
|
|
define Device/Default
|
|
PROFILES := Default
|
|
DEVICE_DTS := $(lastword $(subst _, ,$(1)))
|
|
KERNEL_DEPENDS = $$(wildcard $(DTS_DIR)/$$(DEVICE_DTS).dts)
|
|
KERNEL_ENTRY := 0x00000000
|
|
KERNEL_LOADADDR := 0x00000000
|
|
KERNEL := kernel-bin
|
|
SUPPORTED_DEVICES := $(subst _,$(comma),$(1))
|
|
endef
|
|
|
|
ifeq ($(SUBTARGET),generic)
|
|
|
|
define Device/tplink_tl-wdr4900-v1
|
|
DEVICE_VENDOR := TP-Link
|
|
DEVICE_MODEL := TL-WDR4900
|
|
DEVICE_VARIANT := v1
|
|
TPLINK_HWID := 0x49000001
|
|
TPLINK_HWREV := 1
|
|
TPLINK_FLASHLAYOUT := 16Mppc
|
|
KERNEL_SIZE := 2684k
|
|
KERNEL_NAME := simpleImage.tl-wdr4900-v1
|
|
KERNEL_INITRAMFS :=
|
|
KERNEL := kernel-bin | uImage none
|
|
KERNEL_ENTRY := 0x1000000
|
|
KERNEL_LOADADDR := 0x1000000
|
|
SUPPORTED_DEVICES += tl-wdr4900-v1
|
|
ARTIFACTS := fdt.bin
|
|
ARTIFACT/fdt.bin := append-dtb
|
|
IMAGES := fdt.bin factory.bin sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-rootfs | mktplinkfw sysupgrade | append-metadata
|
|
IMAGE/factory.bin := append-rootfs | mktplinkfw factory
|
|
endef
|
|
TARGET_DEVICES += tplink_tl-wdr4900-v1
|
|
|
|
define Device/sophos_red-15w-rev1
|
|
DEVICE_VENDOR := Sophos
|
|
DEVICE_MODEL := RED 15w
|
|
DEVICE_VARIANT := Rev.1
|
|
# Original firmware uses a dedicated DTB-partition.
|
|
# The bootloader however supports FIT-images.
|
|
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
endef
|
|
TARGET_DEVICES += sophos_red-15w-rev1
|
|
|
|
endif
|
|
|
|
ifeq ($(SUBTARGET),p1020)
|
|
|
|
define Device/aerohive_hiveap-330
|
|
DEVICE_VENDOR := Aerohive
|
|
DEVICE_MODEL := HiveAP-330
|
|
DEVICE_PACKAGES := kmod-tpm-i2c-atmel
|
|
BLOCKSIZE := 128k
|
|
KERNEL := kernel-bin | gzip | uImage gzip
|
|
KERNEL_SIZE := 8m
|
|
KERNEL_INITRAMFS := copy-file $(KDIR)/vmlinux-initramfs | uImage none
|
|
IMAGES := fdt.bin sysupgrade.bin
|
|
IMAGE/fdt.bin := append-dtb
|
|
IMAGE/sysupgrade.bin := append-dtb | pad-to 256k | check-size 256k | \
|
|
append-uImage-fakehdr ramdisk | pad-to 256k | check-size 512k | \
|
|
append-rootfs | pad-rootfs $$(BLOCKSIZE) | pad-to 41216k | check-size 41216k | \
|
|
append-kernel | append-metadata
|
|
endef
|
|
TARGET_DEVICES += aerohive_hiveap-330
|
|
|
|
define Device/enterasys_ws-ap3710i
|
|
DEVICE_VENDOR := Enterasys
|
|
DEVICE_MODEL := WS-AP3710i
|
|
BLOCKSIZE := 128k
|
|
KERNEL = kernel-bin | lzma | fit lzma $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | pad-rootfs | append-metadata
|
|
endef
|
|
TARGET_DEVICES += enterasys_ws-ap3710i
|
|
|
|
define Device/ocedo_panda
|
|
DEVICE_VENDOR := OCEDO
|
|
DEVICE_MODEL := Panda
|
|
DEVICE_PACKAGES := kmod-rtc-ds1307 uboot-envtools
|
|
KERNEL = kernel-bin | gzip | fit gzip $(KDIR)/image-$$(DEVICE_DTS).dtb
|
|
PAGESIZE := 2048
|
|
SUBPAGESIZE := 512
|
|
BLOCKSIZE := 128k
|
|
IMAGES := fdt.bin sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := sysupgrade-tar | append-metadata
|
|
IMAGE/fdt.bin := append-dtb
|
|
endef
|
|
TARGET_DEVICES += ocedo_panda
|
|
|
|
endif
|
|
|
|
ifeq ($(SUBTARGET),p2020)
|
|
|
|
define Device/freescale_p2020rdb
|
|
DEVICE_VENDOR := Freescale
|
|
DEVICE_MODEL := P2020RDB
|
|
DEVICE_DTS_DIR := $(DTS_DIR)/fsl
|
|
DEVICE_PACKAGES := kmod-hwmon-core kmod-hwmon-lm90 kmod-rtc-ds1307 \
|
|
kmod-gpio-pca953x kmod-eeprom-at24
|
|
BLOCKSIZE := 128k
|
|
KERNEL := kernel-bin | gzip | \
|
|
fit gzip $$(KDIR)/image-$$(firstword $$(DEVICE_DTS)).dtb
|
|
SUPPORTED_DEVICES := fsl,P2020RDB
|
|
IMAGES := sysupgrade.bin
|
|
IMAGE/sysupgrade.bin := append-kernel | append-rootfs | \
|
|
pad-rootfs $$(BLOCKSIZE) | append-metadata
|
|
endef
|
|
TARGET_DEVICES += freescale_p2020rdb
|
|
|
|
endif
|
|
|
|
$(eval $(call BuildImage))
|