openwrt/target/linux/bcm27xx/patches-5.10/950-0327-media-bcm2835-unicam-Always-service-interrupts.patch
Álvaro Fernández Rojas 8299d1f057 bcm27xx: add kernel 5.10 support
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:07 +02:00

52 lines
1.6 KiB
Diff

From 3b1b2e000ea9430f6ccf588cb920bd8615701e1d Mon Sep 17 00:00:00 2001
From: Dave Stevenson <dave.stevenson@raspberrypi.com>
Date: Wed, 13 May 2020 18:28:27 +0100
Subject: [PATCH] media: bcm2835-unicam: Always service interrupts
From when bringing up the driver, there was a check in the isr
to ignore interrupts (claiming them handled) should the driver
not be streaming.
The VPU now will not register a camera driver if it finds a
CSI2 node enabled in device tree, therefore this flawed check is
redundant.
https://github.com/raspberrypi/linux/issues/3602
Signed-off-by: Dave Stevenson <dave.stevenson@raspberrypi.com>
---
drivers/media/platform/bcm2835/bcm2835-unicam.c | 15 ---------------
1 file changed, 15 deletions(-)
--- a/drivers/media/platform/bcm2835/bcm2835-unicam.c
+++ b/drivers/media/platform/bcm2835/bcm2835-unicam.c
@@ -782,12 +782,6 @@ static bool unicam_all_nodes_streaming(s
return ret;
}
-static bool unicam_all_nodes_disabled(struct unicam_device *dev)
-{
- return !dev->node[IMAGE_PAD].streaming &&
- !dev->node[METADATA_PAD].streaming;
-}
-
static void unicam_queue_event_sof(struct unicam_device *unicam)
{
struct v4l2_event event = {
@@ -815,15 +809,6 @@ static irqreturn_t unicam_isr(int irq, v
u32 ista, sta;
u64 ts;
- /*
- * Don't service interrupts if not streaming.
- * Avoids issues if the VPU should enable the
- * peripheral without the kernel knowing (that
- * shouldn't happen, but causes issues if it does).
- */
- if (unicam_all_nodes_disabled(unicam))
- return IRQ_NONE;
-
sta = reg_read(unicam, UNICAM_STA);
/* Write value back to clear the interrupts */
reg_write(unicam, UNICAM_STA, sta);