openwrt/package/boot/uboot-envtools/files
Alexey Bartenev 656e411454 ramips: add support for Keenetic Lite III rev. A
General specification:
SoC Type: MediaTek MT7620N (580MHz)
ROM: 8 MB SPI-NOR (W25Q64FV)
RAM: 64 MB DDR (EM6AB160TSD-5G)
Switch: MediaTek MT7530
Ethernet: 5 ports - 5×100MbE (WAN, LAN1-4)
Wireless: 2.4 GHz (MediaTek RT5390): b/g/n
Buttons: 3 button (POWER, RESET, WPS)
Slide switch: 4 position (BASE, ADAPTER, BOOSTER, ACCESS POINT)
Bootloader: U-Boot 1.1.3
Power: 9 VDC, 0.6 A

MAC in stock:
|-	+			|
| LAN 	| RF-EEPROM + 0x04	|
| WLAN	| RF-EEPROM + 0x04	|
| WAN 	| RF-EEPROM + 0x28	|

OEM easy installation
1. Use a PC to browse to http://my.keenetic.net.
2. Go to the System section and open the Files tab.
3. Under the Files tab, there will be a list of system
files. Click on the Firmware file.
4. When a modal window appears, click on the Choose File
button and upload the firmware image.
5. Wait for the router to flash and reboot.

OEM installation using the TFTP method
1. Download the latest firmware image and rename it to
klite3_recovery.bin.
2. Set up a Tftp server on a PC (e.g. Tftpd32) and place the
firmware image to the root directory of the server.
3. Power off the router and use a twisted pair cable to connect
the PC to any of the router's LAN ports.
4. Configure the network adapter of the PC to use IP address
192.168.1.2 and subnet mask 255.255.255.0.
5. Power up the router while holding the reset button pressed.
6. Wait approximately for 5 seconds and then release the
reset button.
7. The router should download the firmware via TFTP and
complete flashing in a few minutes.
After flashing is complete, use the PC to browse to
http://192.168.1.1 or ssh to proceed with the configuration.

Signed-off-by: Alexey Bartenev <41exey@proton.me>
(cherry picked from commit dc79b51533)
2023-06-03 11:49:04 +02:00
..
apm821xx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
ath79 ath79: add support for Linksys EA4500 v3 2022-11-12 18:45:59 +01:00
cns3xxx uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
fw_printsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
fw_setsys uboot-envtools: add wrapper scripts for alternate config 2021-04-08 09:20:59 +02:00
imx_cortexa9 uboot-envtools: move imx to imx_cortexa9 2021-11-03 12:45:40 +01:00
ipq40xx uboot-envtools: Fix format of autogenerated sectors 2022-11-05 22:45:46 +01:00
ipq806x uboot-envtools: Fix format of autogenerated sectors 2022-11-05 22:45:46 +01:00
kirkwood kirkwood: add support for NETGEAR ReadyNAS Duo v2 2021-12-29 20:35:57 +01:00
lantiq uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
layerscape uboot-envtools: layerscape: drop redundant space after case keywords 2021-04-10 15:18:41 +02:00
mediatek_mt7622 uboot-envtools: mt7622: use 4k sectors for UniFi 6 LR (ubootmod) 2022-09-03 02:00:16 +01:00
mediatek_mt7623 uboot-envtools: add configuration for UniElec U7623 board 2022-01-23 20:20:42 +00:00
mpc85xx mpc85xx: add support for Watchguard Firebox T10 2023-03-10 00:13:29 +01:00
mvebu mvebu: add Globalscale MOCHAbin 2021-10-02 16:45:35 +02:00
mxs uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
oxnas uboot-envtools: oxnas: fix wrong eraseblock size for shuttle,kd20 2022-03-27 16:14:00 +01:00
pistachio uboot-envtools: drop shebang from uci-defaults and lib files 2021-04-10 15:18:14 +02:00
qoriq qoriq: add support for WatchGuard Firebox M300 2021-12-21 21:37:46 +02:00
ramips ramips: add support for Keenetic Lite III rev. A 2023-06-03 11:49:04 +02:00
realtek realtek: add support for ZyXEL GS1900-24E 2022-06-06 11:05:29 +02:00
uboot-envtools.sh uboot-envtools: add support for multiple config partitions 2021-04-08 09:20:59 +02:00