openwrt/target/linux/ath79/dts/qca9558_allnet_all-wap02860ac.dts
Adrian Schmutzler 72bd92bea0 ath79: drop num-cs for SPI controller
None of the spi drivers on ath79 uses the num-cs property.

Cc: Chuanhong Guo <gch981213@gmail.com>
Signed-off-by: Adrian Schmutzler <freifunk@adrianschmutzler.de>
Acked-by: Chuanhong Guo <gch981213@gmail.com>
2020-12-04 15:50:24 +01:00

154 lines
2.4 KiB
Plaintext

// SPDX-License-Identifier: GPL-2.0-or-later OR MIT
#include "qca955x.dtsi"
#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>
/ {
model = "ALLNET ALL-WAP02860AC";
compatible = "allnet,all-wap02860ac", "qca,qca9558";
aliases {
label-mac-device = &eth0;
led-boot = &led_power;
led-failsafe = &led_power;
led-running = &led_power;
led-upgrade = &led_power;
};
keys {
compatible = "gpio-keys";
reset {
label = "reset";
linux,code = <KEY_RESTART>;
gpios = <&gpio 17 GPIO_ACTIVE_LOW>;
};
};
leds {
compatible = "gpio-leds";
led_power: power {
label = "amber:power";
gpios = <&gpio 22 GPIO_ACTIVE_LOW>;
default-state = "on";
};
wlan2g {
label = "blue:wlan2g";
gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy1tpt";
};
wlan5g {
label = "green:wlan5g";
gpios = <&gpio 23 GPIO_ACTIVE_LOW>;
linux,default-trigger = "phy0tpt";
};
wps {
label = "blue:wps";
gpios = <&gpio 19 GPIO_ACTIVE_LOW>;
};
};
};
&eth0 {
status = "okay";
pll-data = <0x8e000000 0x80000101 0x80001313>;
phy-handle = <&phy5>;
phy-mode = "rgmii-rxid";
mtd-mac-address = <&art 0x0>;
};
&mdio0 {
status = "okay";
phy5: ethernet-phy@5 {
reg = <5>;
eee-broken-100tx;
eee-broken-1000t;
};
};
&pcie0 {
status = "okay";
wifi@0,0 {
compatible = "qcom,ath10k";
reg = <0 0 0 0 0>;
};
};
&pll {
clocks = <&extosc>;
};
&spi {
status = "okay";
flash@0 {
compatible = "jedec,spi-nor";
reg = <0>;
spi-max-frequency = <25000000>;
partitions {
compatible = "fixed-partitions";
#address-cells = <1>;
#size-cells = <1>;
partition@0 {
label = "u-boot";
reg = <0x000000 0x040000>;
read-only;
};
partition@40000 {
label = "u-boot-env";
reg = <0x040000 0x010000>;
};
partition@50000 {
label = "custom";
reg = <0x050000 0x050000>;
read-only;
};
partition@a0000 {
compatible = "denx,uimage";
label = "firmware";
reg = <0x0a0000 0xcd0000>;
};
partition@d70000 {
label = "failsafe";
reg = <0xd70000 0x280000>;
read-only;
};
art: partition@ff0000 {
label = "art";
reg = <0xff0000 0x010000>;
read-only;
};
};
};
};
&uart {
status = "okay";
};
&wmac {
status = "okay";
mtd-cal-data = <&art 0x1000>;
mtd-mac-address = <&art 0x0>;
mtd-mac-address-increment = <1>;
qca-no-eeprom;
};