Piotr Dymacz 0c6165d21a ar71xx: add support for ALFA Network AP121F ... ALFA Network AP121F is a pocket-size router dedicated for VPN/TOR users. Device is based on Atheros AR9331 WiSoC and is running a custom version (updated from OpenWrt CC to LEDE 17.01 release) of NetAidKit firmware. Specification: - 400/400/200 MHz (CPU/DDR/AHB) - 64 MB of RAM (DDR1) - 16 MB of FLASH (SPI NOR) - 1x 10/100 Mbps Ethernet - 1T1R 2.4 GHz - 1x microSD (optional, on separate PCB) - 3x LED, 1x button, 1x switch - UART header on PCB Flash instruction (under U-Boot web recovery mode): 1. Configure PC with static IP 192.168.1.2/24. 2. Connect PC with RJ45 port, press the reset button, power up device, wait for first blink of all LEDs (indicates network setup), then keep button for 3 following blinks and release it. 3. Open 192.168.1.1 address in your browser and upload sysupgrade image. Signed-off-by: Piotr Dymacz <pepe2k@gmail.com>		2017-07-22 23:13:55 +02:00
..
allnet.sh	ar71xx: Fix sysupgrades for Allnet and OpenMesh devices	2013-10-20 15:59:05 +00:00
dir825.sh	ar71xx: use mtd_get_part_size helper	2013-07-20 09:26:57 +00:00
merakinand.sh	treewide: use only board_name function to get name	2017-07-15 23:13:34 +02:00
openmesh.sh	ar71xx: enable sysupgrade for the OpenMesh A40	2017-02-14 12:18:05 +01:00
platform.sh	ar71xx: add support for ALFA Network AP121F	2017-07-22 23:13:55 +02:00