openwrt/target/linux/ar71xx/image
David Bauer 0c4f658d58 ar71xx: add support for OCEDO Koala
This commit adds support for the OCEDO Koala

SOC:	Qualcomm QCA9558 (Scorpion)
RAM:    128MB
FLASH:  16MiB
WLAN1:  QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2:  QCA9880 5 GHz 802.11nac 3x3
INPUT:  RESET button
LED:    Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
        Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
        The Serial setting is 115200-8-N-1.

Tested and working:
 - Ethernet
 - 2.4 GHz WiFi
 - 5 GHz WiFi
 - TFTP boot from ramdisk image
 - Installation via ramdisk image
 - OpenWRT sysupgrade
 - Buttons
 - LEDs

Installation seems to be possible only through booting an OpenWRT
ramdisk image.

Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.

Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.

Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.

Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with

 > fw_setenv bootcmd run bootcmd_1

Afterwards you can reboot the device.

Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit e36f8b3f39)
2018-06-21 07:02:30 +02:00
..
lzma-loader ar71xx: lzma-loader: constify kernel argv array 2018-06-06 22:27:59 +02:00
common-tp-link.mk ar71xx: make loader-okli build step more generic 2018-06-06 22:27:59 +02:00
generic-legacy-devices.mk ar71xx: image: move Sitecom WLR-8100 from legacy to generic 2018-01-15 00:12:13 +01:00
generic-senao.mk ar71xx: add support for OCEDO Koala 2018-06-21 07:02:30 +02:00
generic-tp-link.mk ar71xx: switch CPE/WBS 210/510 to okli-loader 2018-06-06 22:27:59 +02:00
generic-ubnt.mk ar71xx: Ubiquiti Airmax M: add relocate-kernel to invalidate cache 2018-04-26 20:40:07 +02:00
generic.mk ar71xx: fix AVM package selection 2018-06-09 13:46:01 +02:00
legacy.mk build: replace uses of OpenWrt with $(VERSION_DIST) 2018-02-05 10:15:53 +01:00
Makefile ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
mikrotik.mk ar71xx: add kmod-usb-ehci to fix USB on RB hAP AC 2018-06-18 21:21:56 +02:00
nand.mk ar71xx: add support for Nokia WI2A-AC200i 2017-10-19 12:27:42 +02:00
tiny-legacy-devices.mk ar71xx: create new ar71xx/tiny subtarget for 4MB flash devices 2018-01-13 19:54:45 +01:00
tiny-tp-link.mk ar71xx: add support for TP-Link TL-WR940N v6 2018-04-06 23:11:00 +02:00
ubinize-nbg6716.ini ar71xx: nbg6716: Enable procd nand sysupgrage 2014-06-26 11:43:38 +00:00
ubinize-wndr4300.ini ar71xx: remove old jffs2 marker from image generation on nand targets 2014-06-24 18:14:18 +00:00