mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-23 07:22:33 +00:00
0c4f658d58
This commit adds support for the OCEDO Koala
SOC: Qualcomm QCA9558 (Scorpion)
RAM: 128MB
FLASH: 16MiB
WLAN1: QCA9558 2.4 GHz 802.11bgn 3x3
WLAN2: QCA9880 5 GHz 802.11nac 3x3
INPUT: RESET button
LED: Power, LAN, WiFi 2.4, WiFi 5, SYS
Serial: Header Next to Black metal shield
Pinout is 3.3V - GND - TX - RX (Arrow Pad is 3.3V)
The Serial setting is 115200-8-N-1.
Tested and working:
- Ethernet
- 2.4 GHz WiFi
- 5 GHz WiFi
- TFTP boot from ramdisk image
- Installation via ramdisk image
- OpenWRT sysupgrade
- Buttons
- LEDs
Installation seems to be possible only through booting an OpenWRT
ramdisk image.
Hold down the reset button while powering on the device. It will load a
ramdisk image named 'koala-uImage-initramfs-lzma.bin' from 192.168.100.8.
Note: depending on the present software, the device might also try to
pull a file called 'koala-uimage-factory'. Only the name differs, it
is still used as a ramdisk image.
Wait for the ramdisk image to boot. OpenWRT can be written to the flash
via sysupgrade or mtd.
Due to the flip-flop bootloader which we not (yet) support, you need to
set the partition the bootloader is selecting. It is possible from the
initramfs image with
> fw_setenv bootcmd run bootcmd_1
Afterwards you can reboot the device.
Signed-off-by: David Bauer <mail@david-bauer.net>
(cherry picked from commit e36f8b3f39
)
2379 lines
56 KiB
Plaintext
2379 lines
56 KiB
Plaintext
config ATH79_MACH_A60
|
|
bool "OpenMesh A40/A60 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WI2A_AC200I
|
|
bool "Nokia WI2A-AC200i support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_ALFA_AP120C
|
|
bool "ALFA Network AP120C board support"
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP121F
|
|
bool "ALFA Network AP121F support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_AP96
|
|
bool "ALFA Network AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_HORNET_UB
|
|
bool "ALFA Network Hornet-UB board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_NX
|
|
bool "ALFA Network N2/N5 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TUBE2H
|
|
bool "ALFA Network Tube2H board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SC1750
|
|
bool "Abicom SC1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SC300M
|
|
bool "Abicom SC300M board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SC450
|
|
bool "Abicom SC450 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALL0258N
|
|
bool "Allnet ALL0258N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ALL0315N
|
|
bool "Allnet ALL0315N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ANTMINER_S1
|
|
bool "Bitmain Antminer S1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTMINER_S3
|
|
bool "Bitmain Antminer S3 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTROUTER_R1
|
|
bool "Bitmain Antrouter R1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARDUINO_YUN
|
|
bool "Arduino Yun"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP132
|
|
bool "Atheros AP132 reference board"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP143
|
|
bool "Atheros AP143 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_AP147
|
|
bool "Atheros AP147 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
|
|
config ATH79_MACH_AP152
|
|
bool "Atheros AP152 reference board"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
|
|
config ATH79_MACH_AP531B0
|
|
bool "Rockeetech AP531B0 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP90Q
|
|
bool "YunCore AP80Q/AP90Q support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP91_5G
|
|
bool "ALFA Network AP91-5G support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_AP96
|
|
bool "Atheros AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_PB42
|
|
bool "Atheros PB42 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_C55
|
|
bool "AirTight Networks C-55 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_C60
|
|
bool "AirTight Networks C-60 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_AW_NR580
|
|
bool "AzureWave AW-NR580 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_F9K1115V2
|
|
bool "Belkin AC1750DB board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EPG5000
|
|
bool "EnGenius EPG5000 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_ESR1750
|
|
bool "EnGenius ESR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_PQI_AIR_PEN
|
|
bool "PQI Air Pen"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SOM9331
|
|
bool "SOM9331 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SR3200
|
|
bool "YunCore SR3200 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_BHR_4GRV2
|
|
bool "Buffalo BHR-4GRV2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WHR_HP_G300N
|
|
bool "Buffalo WHR-HP-G300N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLAE_AG300N
|
|
bool "Buffalo WLAE-AG300N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLR8100
|
|
bool "Sitecom WLR-8100 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WZR_HP_AG300H
|
|
bool "Buffalo WZR-HP-AG300H board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH
|
|
bool "Buffalo WZR-HP-G300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select RTL8366_SMI
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH2
|
|
bool "Buffalo WZR-HP-G300NH2 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G450H
|
|
bool "Buffalo WZR-HP-G450H board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_450HP2
|
|
bool "Buffalo WZR-450HP2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WP543
|
|
bool "Compex WP543/WPJ543 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPE72
|
|
bool "Compex WPE72/WPE72NX board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPJ342
|
|
bool "Compex WPJ342 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ344
|
|
bool "Compex WPJ344 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ531
|
|
bool "Compex WPJ531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ558
|
|
bool "Compex WPJ558 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ563
|
|
bool "Compex WPJ563 board support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_XD3200
|
|
bool "YunCore XD3200 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DGL_5500_A1
|
|
bool "D-Link DGL-5500 A1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DHP_1565_A1
|
|
bool "D-Link DHP-1565 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_505_A1
|
|
bool "D-Link DIR-505-A1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_600_A1
|
|
bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_C1
|
|
bool "D-Link DIR-615 rev. C1 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_I1
|
|
bool "D-Link DIR-615 rev. I1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_825_B1
|
|
bool "D-Link DIR-825 rev. B1 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DIR_825_C1
|
|
bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_869_A1
|
|
bool "D-Link DIR-869 rev. A1"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DLAN_HOTSPOT
|
|
bool "devolo dLAN Hotspot support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DLAN_PRO_500_WP
|
|
bool "devolo dLAN pro 500 Wireless+ support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DLAN_PRO_1200_AC
|
|
bool "devolo dLAN pro 1200+ WiFi ac support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DOMYWIFI_DW33D
|
|
bool "DomyWifi DW33D support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DR342
|
|
bool "Wallys DR342 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DR344
|
|
bool "Wallys DR344 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DR531
|
|
bool "Wallys DR531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DRAGINO2
|
|
bool "DRAGINO V2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_E1700AC_V2
|
|
bool "Qxwlan E1700AC v2 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_E2100L
|
|
bool "Linksys E2100L board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_E600G_V2
|
|
bool "Qxwlan E600G/E600GAC v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ESR900
|
|
bool "EnGenius ESR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_EW_BALIN
|
|
bool "embedded wireless Balin Platform support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
|
|
config ATH79_MACH_EW_DORIN
|
|
bool "embedded wireless Dorin Platform support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
|
|
config ATH79_MACH_EL_M150
|
|
bool "EasyLink EL-M150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EL_MINI
|
|
bool "EasyLink EL-MINI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR150
|
|
bool "GL AR150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300
|
|
bool "GL_AR300 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300M
|
|
bool "GL_AR300M support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR750
|
|
bool "GL.iNet GL-AR750 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_DOMINO
|
|
bool "DOMINO support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_MIFI
|
|
bool "GL MIFI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_INET
|
|
bool "GL-INET support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_USB150
|
|
bool "GL.iNet GL-USB150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP120
|
|
bool "TP-LINK EAP120 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ENS202EXT
|
|
bool "EnGenius ENS202EXT support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP300V2
|
|
bool "EnGenius EAP300 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_OOLITE_V1
|
|
bool "GainStrong Oolite/Minibox V1.0 support"
|
|
select SOC_AR933X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_OOLITE_V5_2
|
|
bool "GainStrong Oolite V5.2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_HIVEAP_121
|
|
bool "Aerohive HiveAP-121 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_HIWIFI_HC6361
|
|
bool "HiWiFi HC6361 board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_JA76PF
|
|
bool "jjPlus JA76PF board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP003
|
|
bool "jjPlus JWAP003 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP230
|
|
bool "jjPlus JWAP230 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_KOALA
|
|
bool "OCEDO Koala board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WAM250
|
|
bool "Samsung WAM250 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WIFI_PINEAPPLE_NANO
|
|
bool "Hak5 WiFi Pineapple NANO support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WRT160NL
|
|
bool "Linksys WRT160NL board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_WRT400N
|
|
bool "Linksys WRT400N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WRTNODE2Q
|
|
bool "WRTnode2Q board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R36A
|
|
bool "ALFA Network R36A support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R602N
|
|
bool "P&W R602N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R6100
|
|
bool "NETGEAR R6100 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MC_MAC1200R
|
|
bool "MERCURY MAC1200R board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RB4XX
|
|
bool "MikroTik RouterBOARD 4xx series support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_RB750
|
|
bool "MikroTik RouterBOARD 750 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB91X
|
|
bool "MikroTik RouterBOARD 91X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB922
|
|
bool "MikroTik RouterBOARD 922 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
select RLE_DECOMPRESS
|
|
|
|
config ATH79_MACH_RB95X
|
|
bool "MikroTik RouterBOARD 95X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB2011
|
|
bool "MikroTik RouterBOARD 2011 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RBSPI
|
|
bool "MikroTik RouterBOARD SPI-NOR support"
|
|
select SOC_AR934X
|
|
select SOC_QCA953X
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
MikroTik ROuterBOARD 911-2Hn (911 Lite2)
|
|
MikroTik ROuterBOARD 911-5Hn (911 Lite5)
|
|
MikroTik RouterBOARD mAP
|
|
MikroTik RouterBOARD mAP lite
|
|
MikroTik RouterBOARD hAP lite
|
|
MikroTik RouterBOARD hAP
|
|
MikroTik RouterBOARD hAP ac
|
|
MikroTik RouterBOARD hAP ac lite
|
|
MikroTik RouterBOARD hEX PoE lite
|
|
MikroTik RouterBOARD hEX lite
|
|
MikroTik RouterBOARD Powerbox
|
|
MikroTik RouterBOARD LHG 5
|
|
MikroTik RouterBOARD cAP (EXPERIMENTAL)
|
|
MikroTik RouterBOARD wAP
|
|
|
|
config ATH79_MACH_RBSXTLITE
|
|
bool "MikroTik RouterBOARD SXT Lite"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_SMART_300
|
|
bool "NC-LINK SMART-300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_T830
|
|
bool "YunCore T830 support"
|
|
select SOC_QCA953X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TELLSTICK_ZNET_LITE
|
|
bool "TellStick ZNet Lite"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNDAP360
|
|
bool "NETGEAR WNDAP360 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNDR3700
|
|
bool "NETGEAR WNDR3700 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNDR4300
|
|
bool "NETGEAR WNDR3700v4/WNDR4300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000
|
|
bool "NETGEAR WNR2000 board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000_V3
|
|
bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNR2200
|
|
bool "NETGEAR WNR2200 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNR2000_V4
|
|
bool "NETGEAR WNR2000 V4"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM2P
|
|
bool "OpenMesh OM2P board support"
|
|
select SOC_AR724X
|
|
select SOC_AR933X
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P
|
|
bool "OpenMesh OM5P board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_AC
|
|
bool "OpenMesh OM5P-AC board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_ACv2
|
|
bool "OpenMesh OM5P-ACv2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_G1
|
|
bool "OMYlink OMY G1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_X1
|
|
bool "OMYlink OMY X1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ONION_OMEGA
|
|
bool "ONION OMEGA support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR12
|
|
bool "Meraki MR12 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR16
|
|
bool "Meraki MR16 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR18
|
|
bool "Meraki MR18 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_MR600
|
|
bool "OpenMesh MR600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W04NU
|
|
bool "Planex MZK-W04NU board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W300NH
|
|
bool "Planex MZK-W300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RE355
|
|
bool "TP-LINK RE355 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RE450
|
|
bool "TP-LINK RE450 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RME_EG200
|
|
bool "eTactica EG200 board supprt"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RUT9XX
|
|
bool "Teltonika RUT900 series support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select GPIO_PCA953X
|
|
|
|
config ATH79_MACH_RW2458N
|
|
bool "Redwave RW2458N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_CAP324
|
|
bool "PowerCloud CAP324 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CAP4200AG
|
|
bool "Senao CAP4200AG support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR3000
|
|
bool "PowerCloud CR3000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR5000
|
|
bool "PowerCloud CR5000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR1750
|
|
bool "OpenMesh MR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR900
|
|
bool "OpenMesh MR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP7660D
|
|
bool "Senao EAP7660D support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_BSB
|
|
bool "Smart Electronics Black Swift board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C25_V1
|
|
bool "TP-LINK Archer C25 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C58_V1
|
|
bool "TP-LINK Archer C58 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C59_V1
|
|
bool "TP-LINK Archer C59 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C60_V1
|
|
bool "TP-LINK Archer C60 v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C60_V2
|
|
bool "TP-LINK Archer C60 v2 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C7
|
|
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
|
|
select SOC_QCA955X
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE505N
|
|
bool "P&W CPE505N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE510
|
|
bool "TP-LINK CPE510 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE830
|
|
bool "YunCore CPE830 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE870
|
|
bool "YunCore CPE870 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR11U
|
|
bool "TP-LINK TL-MR11U/TL-MR3040 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR13U
|
|
bool "TP-LINK TL-MR13U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3020
|
|
bool "TP-LINK TL-MR3020 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3X20
|
|
bool "TP-LINK TL-MR3220/3420 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TL_MR6400
|
|
bool "TP-LINK TL-MR6400 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WAX50RE
|
|
bool "TP-LINK TL-WA750/850RE support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA701ND_V2
|
|
bool "TP-LINK TL-WA701ND v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA7210N_V2
|
|
bool "TP-LINK TL-WA7210N v2 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA801ND_V3
|
|
bool "TP-LINK TL-WA801ND v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA830RE_V2
|
|
bool "TP-LINK TL-WA830RE v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA850RE_V2
|
|
bool "TP-LINK TL-WA850RE v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA855RE_V1
|
|
bool "TP-LINK TL-WA855RE V1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND
|
|
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WA901ND_V2
|
|
bool "TP-LINK TL-WA901ND v2 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND_V4
|
|
bool "TP-LINK TL-WA901ND v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3320_V2
|
|
bool "TP-LINK TL-WDR3320 v2 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3500
|
|
bool "TP-LINK TL-WDR3500 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR4300
|
|
bool "TP-LINK TL-WDR3600/4300/4310 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR6500_V2
|
|
bool "TP-LINK TL-WDR6500 v2 board support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR703N
|
|
bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR720N_V3
|
|
bool "TP-LINK TL-WR720N v3/v4 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR741ND
|
|
bool "TP-LINK TL-WR741ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR741ND_V4
|
|
bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR802N_V1
|
|
bool "TP-LINK TL-WR802N v1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR802N_V2
|
|
bool "TP-LINK TL-WR802N v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR810N
|
|
bool "TP-LINK TL-WR810N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR810N_V2
|
|
bool "TP-LINK TL-WR810N v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR840N_V2
|
|
bool "TP-LINK TL-WR840N v2/v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V1
|
|
bool "TP-LINK TL-WR841N v1 support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR841N_V8
|
|
bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V9
|
|
bool "TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3/TL-WR740N/ND v6 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR902AC_V1
|
|
bool "TP-LINK TL-WR902AC v1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND
|
|
bool "TP-LINK TL-WR941ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND_V6
|
|
bool "TP-LINK TL-WR941ND v6 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR940N_V4
|
|
bool "TP-LINK TL-WR940N v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR942N_V1
|
|
bool "TP-LINK TL-WR942N v1 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TL_WR1041N_V2
|
|
bool "TP-LINK TL-WR1041N v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043N_V5
|
|
bool "TP-LINK TL-WR1043N v5 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND
|
|
bool "TP-LINK TL-WR1043ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND_V2
|
|
bool "TP-LINK TL-WR1043ND v2 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND_V4
|
|
bool "TP-LINK TL-WR1043ND v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR2543N
|
|
bool "TP-LINK TL-WR2543N/ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TS_D084
|
|
bool "PISEN TS-D084 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_632BRP
|
|
bool "TRENDnet TEW-632BRP support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_673GRU
|
|
bool "TRENDnet TEW-673GRU support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TEW_712BR
|
|
bool "TRENDnet TEW-712BR support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_732BR
|
|
bool "TRENDnet TEW-732BR support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_823DRU
|
|
bool "TRENDnet TEW-823DRU support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_UBNT
|
|
bool "Ubiquiti AR71xx based boards support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_UBNT_UNIFIAC
|
|
bool "Ubiquiti UniFi AC (LITE/LR/MESH/PRO) support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WEIO
|
|
bool "WeIO board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MYNET_N600
|
|
bool "WD My Net N600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_N750
|
|
bool "WD My Net N750 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_REXT
|
|
bool "WD My Net Wi-Fi Range Extender board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_Z1
|
|
bool "Meraki Z1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_ZBT_WE1526
|
|
bool "Zbtlink ZBT-WE1526 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ZCN_1523H
|
|
bool "Zcomax ZCN-1523H support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_N5Q
|
|
bool "ALFA Network N5Q support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_NBG460N
|
|
bool "Zyxel NBG460N/550N/550NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_NBG6716
|
|
bool "Zyxel NBG6616/NBG6716 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_CARAMBOLA2
|
|
bool "8devices Carambola2 board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_LAN_TURTLE
|
|
bool "Hak5 LAN Turtle and Packet Squirrel support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_LIMA
|
|
bool "8devices Lima board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
|
|
config ATH79_MACH_RAMBUTAN
|
|
bool "8devices Rambutan board"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E316N_V2
|
|
bool "COMFAST CF-E316N v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E320N_V2
|
|
bool "COMFAST CF-E320N v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E355AC
|
|
bool "COMFAST CF-E355AC v1/v2 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E375AC
|
|
bool "COMFAST CF-E375AC support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E380AC_V1
|
|
bool "COMFAST CF-E380AC v1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E380AC_V2
|
|
bool "COMFAST CF-E380AC v2 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E520N
|
|
bool "COMFAST CF-E520N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E530N
|
|
bool "COMFAST CF-E530N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_BHU_BXU2000N2_A
|
|
bool "BHU BXU2000n-2 rev. A support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_QIHOO_C301
|
|
bool "Qihoo 360 C301 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DAP_1330_A1
|
|
bool "D-Link DAP-1330 rev. A1 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DAP_2695_A1
|
|
bool "D-Link DAP-2695 rev. A1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TL_WPA8630
|
|
bool "TP-Link TL-WPA8630 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_FRITZ300E
|
|
bool "AVM FRITZ!WLAN Repeater 300E support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_FRITZ4020
|
|
bool "AVM FRITZ!Box 4020 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_M25P80
|