mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 00:11:13 +00:00
480003e9eb
The Helios 4 is a NAS from Kobol that is powered by an Armada 38x MicroSOM from Solidrun, similarly to Clearfog. This device has: -Armada 38x CPU (dual core ARMv7 1.6 Ghz) -2 GB of ECC RAM -Gigabit ethernet (Marvell) -2x USB 3.0 ports -4x Sata 3.0 ports -i2c header (J9 |>GND|SDA|SCL|VCC) -2x 3-pin fan headers with PWM -micro-usb port is a TTL/UART to USB converter connected to TTL -MicroSD card slot -System, 4xSata and 1xUSB LEDs NOT WORKING: fan control Fan Control requires a kernel patch that is available in the Armbian project (the "default firmware" of this device) and named mvebu-gpio-remove-hardcoded -timer-assignment This patch isn't acceptable by OpenWrt, it should be upstreamed. I also have that patch in my own local OpenWrt builds, in case you want a more clean and less confusing patch for upstreaming. To install, write the disk image on a micro SD card with dd or win32 disk imager, insert the card in the slot. Check that the dip switch battery for boot selection is as follows Switch 1 and 2 down/off, switches 3, 4, 5 up/on. Signed-off-by: Alberto Bursi <bobafetthotmail@gmail.com>
29 lines
673 B
Diff
29 lines
673 B
Diff
--- a/arch/arm/boot/dts/armada-388-helios4.dts
|
|
+++ b/arch/arm/boot/dts/armada-388-helios4.dts
|
|
@@ -15,6 +15,13 @@
|
|
model = "Helios4";
|
|
compatible = "kobol,helios4", "marvell,armada388",
|
|
"marvell,armada385", "marvell,armada380";
|
|
+
|
|
+ aliases {
|
|
+ led-boot = &led_status;
|
|
+ led-failsafe = &led_status;
|
|
+ led-running = &led_status;
|
|
+ led-upgrade = &led_status;
|
|
+ };
|
|
|
|
memory {
|
|
device_type = "memory";
|
|
@@ -70,10 +77,9 @@
|
|
|
|
system-leds {
|
|
compatible = "gpio-leds";
|
|
- status-led {
|
|
+ led_status: status-led {
|
|
label = "helios4:green:status";
|
|
gpios = <&gpio0 24 GPIO_ACTIVE_LOW>;
|
|
- linux,default-trigger = "heartbeat";
|
|
default-state = "on";
|
|
};
|
|
|