ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2025-02-03 17:50:49 +00:00
Code Issues Actions 3 Packages Projects Releases Wiki Activity
openwrt/package/firmware/ipq-wifi/Makefile
Connor Yoon 3569b37b15 ipq807x: add Spectrum SAX1V1K 
Spectrum SAX1V1K is a AX WIFI router with 3 1G and 1 2.5G ports.
The router is provided to Spectrum customers.
It is OEM of Askey RT5010W
https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923

It continues the original work by @MeisterLone to get this device supported.

Specifications:
```
  •  CPU: Qualcomm IPQ8072A Quad core Cortex-A53 2.2GHz
  •  RAM: 2048MB of DDR3
  •  Storage: 1024MB eMMC
  •  Ethernet: 3x 1G RJ45 ports (QCA8075) + 1 2.5G Port (QCA8081)
  •  WLAN:
     • 2.4GHz: Qualcomm QCN5024 4x4 802.11b/g/n/ax 1174 Mbps PHY rate
     • 5GHz: Qualcomm QCN5054 4x4 802.11a/b/g/n/ac/ax 2402 PHY rate

  •  LED: 1 gpio-controlled dual color led (blue/red)
  •  Buttons: 1x reset
  •  Power: 12V DC jack
```

Notes:
```
  •  This commit adds only single partition support, that means
     sysupgrade is upgrading the current rootfs partition.
  •  Installation can be done by serial connection only.
  •  A poulated serial header is onboard
     https://forum.openwrt.org/t/spectrum-sax1v1k-askey-rt5010w-openwrt-support/149923/6
  •  RX/TX is working, u-boot bootwait is active, secure boot is enabled.
```

Installation Instructions:

	**Most part of the installation is performed from an initramfs image.**

	Boot initramfs : Using serial connection
	1. Boot up the device and wait till it displays "VERIFY_IB: Success. verify IB ok"
	2. Once that message appears,
	    login with username 'root'
	    password serial number of your router in uppercase.
	3. Use vi to paste the 'open.sh' script from @MeisterLone github on your device
	    https://github.com/MeisterLone/Askey-RT5010W-D187-REV6/blob/master/Patch/open.sh
	4. chmod 755 open.sh
	5. ./open.sh
	6. Set your ip to 192.168.0.1
	7. Run a TFTP server and host the initramfs image on the TFTP server and name it "recovery.img"
	8. Reboot device. On boot it will try TFTP.

	Install OpenWrt from initramfs image:
	1. Use SCP (or other way) to transfer OpenWrt factory image
	2. Connect to device using SSH (on a LAN port)
	3. Flash firmware: sysupgrade
	   # sysupgrade -n -v /tmp/openwrt_sysupgrade.bin
	4. Set U-boot env variable: bootcmd
	   # fw_setenv bootcmd "run fix_uboot; run setup_and_boot"
	5. Reboot the device
	   # reboot
	6. Once device is booted, residue of previous firmware will prevent openwrt to work properly.
	    Factory Reset is MUST required
	    # Once serial console is displaying to login, hold reset button for 10 sec
	7. Now everything should be operational.

        Note: this PR adds only single partition support, that means sysupgrade is
              upgrading the current rootfs partition

Signed-off-by: Connor Yoon <j_connor@taliaent.com>
2024-04-23 21:48:34 +02:00

183 lines
6.9 KiB
Makefile
Raw Blame History

include $(TOPDIR)/rules.mk
include $(INCLUDE_DIR)/version.mk
PKG_NAME:=ipq-wifi
PKG_RELEASE:=1
PKG_SOURCE_PROTO:=git
PKG_SOURCE_URL=$(PROJECT_GIT)/project/firmware/qca-wireless.git
PKG_SOURCE_DATE:=2024-04-16
PKG_SOURCE_VERSION:=1d51799e6768a304da7840b8346e7487efd77f49
PKG_MIRROR_HASH:=9cf0917532283c1a1708643022a5ed1ec4af6bb9ebaff57fc2f0f2c229f2469e
PKG_FLAGS:=nonshared
include $(INCLUDE_DIR)/package.mk
define Build/Compile
endef
# Use ath10k-bdencoder from https://github.com/qca/qca-swiss-army-knife.git
# to generate the board-* files here.
#
# This is intended to be used on an interim basis until device-specific
# board data for new devices is available through the upstream compilation
#
# Please send a mail with your device-specific board files upstream.
# You can find instructions and examples on the linux-wireless wiki:
# <https://wireless.wiki.kernel.org/en/users/drivers/ath10k/boardfiles>
ALLWIFIBOARDS:= \
8devices_mango \
arcadyan_aw1000 \
buffalo_wxr-5950ax12 \
cmcc_rm2-6 \
compex_wpq873 \
dynalink_dl-wrx36 \
edgecore_eap102 \
edimax_cax1800 \
linksys_mx4200 \
linksys_mx5300 \
netgear_lbr20 \
netgear_rax120v2 \
netgear_wax214 \
netgear_wax218 \
netgear_wax620 \
netgear_wax630 \
prpl_haze \
qnap_301w \
redmi_ax6 \
spectrum_sax1v1k \
wallys_dr40x9 \
xiaomi_ax3600 \
xiaomi_ax9000 \
yyets_le1 \
yuncore_ax880 \
yuncore_fap650 \
zbtlink_zbt-z800ax \
zte_mf269 \
zte_mf287 \
zte_mf287plus \
zyxel_nbg7815
ALLWIFIPACKAGES:=$(foreach BOARD,$(ALLWIFIBOARDS),ipq-wifi-$(BOARD))
define Package/ipq-wifi-default
SUBMENU:=ath10k Board-Specific Overrides
SECTION:=firmware
CATEGORY:=Firmware
DEPENDS:=@(TARGET_ipq40xx||TARGET_ipq806x||TARGET_qualcommax)
TITLE:=Custom Board
endef
define ipq-wifi-install-one-to
$(INSTALL_DIR) $(2)/lib/firmware/ath10k/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath10k/$(3)/board-2.bin
endef
define ipq-wifi-install-ath11-one-to
$(INSTALL_DIR) $(2)/lib/firmware/ath11k/$(3)/
$(INSTALL_DATA) $(1) $(2)/lib/firmware/ath11k/$(3)/board-2.bin
endef
define ipq-wifi-install-one
$(if $(filter $(suffix $(1)),.QCA4019 .qca4019),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA4019/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA9888 .qca9888),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9888/hw2.0),\
$(if $(filter $(suffix $(1)),.QCA9889 .qca9889),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9887/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA9984 .qca9984),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA9984/hw1.0),\
$(if $(filter $(suffix $(1)),.QCA99X0 .qca99x0),\
$(call ipq-wifi-install-one-to,$(1),$(2),QCA99X0/hw2.0),\
$(if $(filter $(suffix $(1)),.IPQ6018 .ipq6018),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ6018/hw1.0),\
$(if $(filter $(suffix $(1)),.IPQ8074 .ipq8074),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),IPQ8074/hw2.0),\
$(if $(filter $(suffix $(1)),.QCN9074 .qcn9074),\
$(call ipq-wifi-install-ath11-one-to,$(1),$(2),QCN9074/hw1.0),\
$(error Unrecognized board-file suffix '$(suffix $(1))' for '$(1)')\
))))))))
endef
# Blank line required at end of above define due to foreach context
define generate-ipq-wifi-package
define Package/ipq-wifi-$(1)
$(call Package/ipq-wifi-default)
TITLE:=board-2.bin Overrides for $(2)
CONFLICTS:=$(PREV_BOARD)
endef
define Package/ipq-wifi-$(1)/description
The $(2) requires board-specific, reference ("cal") data
that is not yet present in the upstream wireless firmware distribution.
This package supplies board-2.bin file(s) that, in the interim,
overwrite those supplied by the ath10k-firmware-* packages.
This is package is only necessary for the $(2).
Do not install it for any other device!
endef
define Package/ipq-wifi-$(1)/install-overlay
$$$$(foreach IPQ_WIFI_BOARD_FILE,$$$$(wildcard $(PKG_BUILD_DIR)/board-$(1).*),\
$$$$(call ipq-wifi-install-one,$$$$(IPQ_WIFI_BOARD_FILE),$$(1)))
endef
PREV_BOARD+=ipq-wifi-$(1)
endef
# To add local files for testing:
# 1. create a new directory in the ipq-wifi package directory called "files".
# 2. place there the needed board files.
#
# To send a board file upstream:
# 1. create a pull request in https://github.com/openwrt/firmware_qca-wireless or
# send a patch to the mailing list adding the tag firmware/qca-wireless before
# the PATCH tag.
# 2. create a pull request in the main openwrt repository bumping the ipq-wifi
# package to the new version and adding the required lines to add the board file.
#
# Changes needed to the ipq-wifi Makefile:
# 1. Add board name to ALLWIFIBOARDS
# 2. Add $(eval $(call generate-ipq-wifi-package,<devicename>,<display name>))
#
# Board files should follow this name structure:
# board-<devicename>.<qca4019|qca9888|qca9889|qca9984|qca99x0|ipq8074>
$(eval $(call generate-ipq-wifi-package,8devices_mango,8devices Mango))
$(eval $(call generate-ipq-wifi-package,arcadyan_aw1000,Arcadyan AW1000))
$(eval $(call generate-ipq-wifi-package,buffalo_wxr-5950ax12,Buffalo WXR-5950AX12))
$(eval $(call generate-ipq-wifi-package,cmcc_rm2-6,CMCC RM2-6))
$(eval $(call generate-ipq-wifi-package,compex_wpq873,Compex WPQ-873))
$(eval $(call generate-ipq-wifi-package,dynalink_dl-wrx36,Dynalink DL-WRX36))
$(eval $(call generate-ipq-wifi-package,edgecore_eap102,Edgecore EAP102))
$(eval $(call generate-ipq-wifi-package,edimax_cax1800,Edimax CAX1800))
$(eval $(call generate-ipq-wifi-package,linksys_mx4200,Linksys MX4200))
$(eval $(call generate-ipq-wifi-package,linksys_mx5300,Linksys MX5300))
$(eval $(call generate-ipq-wifi-package,netgear_lbr20,Netgear LBR20))
$(eval $(call generate-ipq-wifi-package,netgear_rax120v2,Netgear RAX120v2))
$(eval $(call generate-ipq-wifi-package,netgear_wax214,Netgear WAX214))
$(eval $(call generate-ipq-wifi-package,netgear_wax218,Netgear WAX218))
$(eval $(call generate-ipq-wifi-package,netgear_wax620,Netgear WAX620))
$(eval $(call generate-ipq-wifi-package,netgear_wax630,Netgear WAX630))
$(eval $(call generate-ipq-wifi-package,qnap_301w,QNAP 301w))
$(eval $(call generate-ipq-wifi-package,prpl_haze,prpl Haze))
$(eval $(call generate-ipq-wifi-package,redmi_ax6,Redmi AX6))
$(eval $(call generate-ipq-wifi-package,spectrum_sax1v1k,Spectrum SAX1V1K))
$(eval $(call generate-ipq-wifi-package,wallys_dr40x9,Wallys DR40X9))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax3600,Xiaomi AX3600))
$(eval $(call generate-ipq-wifi-package,xiaomi_ax9000,Xiaomi AX9000))
$(eval $(call generate-ipq-wifi-package,yyets_le1,YYeTs LE1))
$(eval $(call generate-ipq-wifi-package,yuncore_ax880,Yuncore AX880))
$(eval $(call generate-ipq-wifi-package,yuncore_fap650,Yuncore FAP650))
$(eval $(call generate-ipq-wifi-package,zbtlink_zbt-z800ax,Zbtlink ZBT-Z800AX))
$(eval $(call generate-ipq-wifi-package,zte_mf269,ZTE MF269))
$(eval $(call generate-ipq-wifi-package,zte_mf287,ZTE MF287))
$(eval $(call generate-ipq-wifi-package,zte_mf287plus,ZTE MF287Plus))
$(eval $(call generate-ipq-wifi-package,zyxel_nbg7815,Zyxel NBG7815))
$(foreach PACKAGE,$(ALLWIFIPACKAGES),$(eval $(call BuildPackage,$(PACKAGE))))
Reference in New Issue View Git Blame Copy Permalink