mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
45e47a9cd7
Refreshed all patches. Changed: 105-ea4500.patch-> Upstream DSA driver was updated. Patch was fixed 202-linksys-find-active-root.patch -> Upstream driver was moved. Patch was fixed Signed-off-by: Pawel Dembicki <paweldembicki@gmail.com>
96 lines
1.9 KiB
Diff
96 lines
1.9 KiB
Diff
--- a/arch/arm/boot/dts/kirkwood-linksys-viper.dts
|
|
+++ b/arch/arm/boot/dts/kirkwood-linksys-viper.dts
|
|
@@ -24,6 +24,10 @@
|
|
};
|
|
|
|
aliases {
|
|
+ led-boot = &led_white_health;
|
|
+ led-failsafe = &led_white_health;
|
|
+ led-running = &led_white_health;
|
|
+ led-upgrade = &led_white_health;
|
|
serial0 = &uart0;
|
|
};
|
|
|
|
@@ -56,9 +60,10 @@
|
|
pinctrl-0 = < &pmx_led_white_health &pmx_led_white_pulse >;
|
|
pinctrl-names = "default";
|
|
|
|
- white-health {
|
|
+ led_white_health: white-health {
|
|
label = "viper:white:health";
|
|
gpios = <&gpio0 7 GPIO_ACTIVE_HIGH>;
|
|
+ default-state = "on";
|
|
};
|
|
|
|
white-pulse {
|
|
@@ -66,6 +71,17 @@
|
|
gpios = <&gpio0 14 GPIO_ACTIVE_HIGH>;
|
|
};
|
|
};
|
|
+
|
|
+ mvsw61xx@10 {
|
|
+ compatible = "marvell,88e6171";
|
|
+ status = "okay";
|
|
+ reg = <0x10>;
|
|
+
|
|
+ mii-bus = <&mdio>;
|
|
+ cpu-port-0 = <5>;
|
|
+ cpu-port-1 = <6>;
|
|
+ is-indirect;
|
|
+ };
|
|
};
|
|
|
|
&pinctrl {
|
|
@@ -114,22 +130,22 @@
|
|
};
|
|
|
|
partition@200000 {
|
|
- label = "kernel";
|
|
+ label = "kernel1";
|
|
reg = <0x200000 0x2A0000>;
|
|
};
|
|
|
|
partition@4a0000 {
|
|
- label = "rootfs";
|
|
+ label = "rootfs1";
|
|
reg = <0x4A0000 0x1760000>;
|
|
};
|
|
|
|
partition@1c00000 {
|
|
- label = "alt_kernel";
|
|
+ label = "kernel2";
|
|
reg = <0x1C00000 0x2A0000>;
|
|
};
|
|
|
|
partition@1ea0000 {
|
|
- label = "alt_rootfs";
|
|
+ label = "rootfs2";
|
|
reg = <0x1EA0000 0x1760000>;
|
|
};
|
|
|
|
@@ -162,6 +178,7 @@
|
|
status = "okay";
|
|
|
|
switch@10 {
|
|
+ status = "disabled";
|
|
compatible = "marvell,mv88e6085";
|
|
#address-cells = <1>;
|
|
#size-cells = <0>;
|
|
@@ -225,10 +242,14 @@
|
|
};
|
|
|
|
/* eth1 is connected to the switch at port 6. However DSA only supports a
|
|
- * single CPU port. So leave this port disabled to avoid confusion.
|
|
+ * single CPU port. Upstream uses DSA so they disable this port to avoid confusion.
|
|
*/
|
|
ð1 {
|
|
- status = "disabled";
|
|
+ status = "okay";
|
|
+ ethernet1-port@0 {
|
|
+ speed = <1000>;
|
|
+ duplex = <1>;
|
|
+ };
|
|
};
|
|
|
|
/* There is no battery on the board, so the RTC does not keep
|