mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
011f2c26f1
As usual these patches were extracted and rebased from the raspberry pi repo: https://github.com/raspberrypi/linux/tree/rpi-4.4.y Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
69 lines
2.8 KiB
Diff
69 lines
2.8 KiB
Diff
From 9120234bb37043477ef69fec8c03c3731ed6861f Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.org>
|
|
Date: Mon, 25 Jan 2016 09:12:06 +0000
|
|
Subject: [PATCH] BCM270X_DT: Add sdio_overclock parameter to sdio overlay
|
|
|
|
The sdio_overclock parameter is like the overclock_50 parameter, i.e.
|
|
it sets an alternate frequency (in MHz) to use when the MMC framework
|
|
requests 50MHz, except that it applies to the SDIO bus.
|
|
|
|
Be aware that the actual frequencies achievable are limited to even integer
|
|
divisions of 250MHz, and that the driver will round up to include fractions
|
|
(e.g. 62 will include 62.5) but then round down to the nearest frequency.
|
|
In other words, the chosen frequency is the highest possible that is less than
|
|
the parameter value + 1. In practise this means that 62 is the only sensible
|
|
value.
|
|
|
|
Examples:
|
|
250MHz/4 = 62.5MHz (sdio_overclock=62)
|
|
250MHz/2 = 125MHz (sdio_overclock=125) # Too fast
|
|
---
|
|
arch/arm/boot/dts/overlays/README | 9 ++++++---
|
|
arch/arm/boot/dts/overlays/sdio-overlay.dts | 2 ++
|
|
2 files changed, 8 insertions(+), 3 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/README
|
|
+++ b/arch/arm/boot/dts/overlays/README
|
|
@@ -53,8 +53,8 @@ have its contents deleted (or commented
|
|
Using Overlays
|
|
==============
|
|
|
|
-Overlays are loaded using the "dtoverlay" directive. As an example, consider the
|
|
-popular lirc-rpi module, the Linux Infrared Remote Control driver. In the
|
|
+Overlays are loaded using the "dtoverlay" directive. As an example, consider
|
|
+the popular lirc-rpi module, the Linux Infrared Remote Control driver. In the
|
|
pre-DT world this would be loaded from /etc/modules, with an explicit
|
|
"modprobe lirc-rpi" command, or programmatically by lircd. With DT enabled,
|
|
this becomes a line in config.txt:
|
|
@@ -621,9 +621,12 @@ Name: sdio
|
|
Info: Selects the bcm2835-sdhost SD/MMC driver, optionally with overclock,
|
|
and enables SDIO via GPIOs 22-27.
|
|
Load: dtoverlay=sdio,<param>=<val>
|
|
-Params: overclock_50 Clock (in MHz) to use when the MMC framework
|
|
+Params: overclock_50 SD Clock (in MHz) to use when the MMC framework
|
|
requests 50MHz
|
|
|
|
+ sdio_overclock SDIO Clock (in MHz) to use when the MMC
|
|
+ framework requests 50MHz
|
|
+
|
|
force_pio Disable DMA support (default off)
|
|
|
|
pio_limit Number of blocks above which to use DMA
|
|
--- a/arch/arm/boot/dts/overlays/sdio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/sdio-overlay.dts
|
|
@@ -12,6 +12,7 @@
|
|
pinctrl-0 = <&sdio_pins>;
|
|
non-removable;
|
|
bus-width = <4>;
|
|
+ brcm,overclock-50 = <0>;
|
|
status = "okay";
|
|
};
|
|
};
|
|
@@ -30,5 +31,6 @@
|
|
__overrides__ {
|
|
poll_once = <&sdio_mmc>,"non-removable?";
|
|
bus_width = <&sdio_mmc>,"bus-width:0";
|
|
+ sdio_overclock = <&sdio_mmc>,"brcm,overclock-50:0";
|
|
};
|
|
};
|