mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-27 09:12:39 +00:00
8072264b96
Refresh patches for all targets that support kernel 4.4. Compile-tested on all targets that use kernel 4.4 and aren't marked broken. Runtime-tested on ar71xx, octeon and x86/64. Signed-off-by: Stijn Tintel <stijn@linux-ipv6.be>
1084 lines
33 KiB
Diff
1084 lines
33 KiB
Diff
From: Andy Shevchenko <andriy.shevchenko@linux.intel.com>
|
|
Date: Sat, 21 May 2016 22:46:32 +0200
|
|
Subject: [PATCH v2 00/23] ata: sata_dwc_460ex: make it working again
|
|
|
|
The last approach in the commit 8b3444852a2b ("sata_dwc_460ex: move to generic
|
|
DMA driver") to switch to generic DMA engine API wasn't tested on bare metal.
|
|
Besides that we expecting new board support coming with the same SATA IP but
|
|
with different DMA.
|
|
|
|
This series is targetting the following things:
|
|
- a few bug fixes to the original driver
|
|
- a part to fix the DMA engine usage and in particularly dw_dmac driver
|
|
- move driver to use generic PHY and "dmas" property which leads to update in DTS
|
|
|
|
The driver has been tested myself on Sam460ex and WD MyBookLive (apollo3g)
|
|
boards. In any case I ask Christian, Måns, and Julian to independently test and
|
|
provide Tested-by tag or an error report.
|
|
|
|
Series depends on previously published but not yet fully applied series [1].
|
|
|
|
The patches are also available via public branch [2].
|
|
|
|
[1] http://www.spinics.net/lists/dmaengine/msg09250.html
|
|
[2] https://bitbucket.org/andy-shev/linux/branch/topic%2Fdw%2Fsata
|
|
|
|
Since v1:
|
|
- simplify patch 8 (David Laight)
|
|
- add Tested-by and Acked-by tags
|
|
|
|
Andy Shevchenko (11):
|
|
ata: sata_dwc_460ex: set dma_boundary to 0x1fff
|
|
ata: sata_dwc_460ex: burst size must be in items not bytes
|
|
ata: sata_dwc_460ex: DMA is always a flow controller
|
|
ata: sata_dwc_460ex: select only core part of DMA driver
|
|
ata: sata_dwc_460ex: don't call ata_sff_qc_issue() on DMA commands
|
|
ata: sata_dwc_460ex: correct HOSTDEV{P}_FROM_*() macros
|
|
ata: sata_dwc_460ex: supply physical address of FIFO to DMA
|
|
ata: sata_dwc_460ex: switch to new dmaengine_terminate_* API
|
|
ata: sata_dwc_460ex: use devm_ioremap
|
|
ata: sata_dwc_460ex: make debug messages neat
|
|
powerpc/4xx: Device tree update for the 460ex DWC SATA
|
|
|
|
Christian Lamparter (1):
|
|
ata: sata_dwc_460ex: fix crash on offline links without an attached
|
|
drive
|
|
|
|
Mans Rullgard (11):
|
|
ata: sata_dwc_460ex: remove incorrect locking
|
|
ata: sata_dwc_460ex: skip dma setup for non-dma commands
|
|
ata: sata_dwc_460ex: use "dmas" DT property to find dma channel
|
|
ata: sata_dwc_460ex: add phy support
|
|
ata: sata_dwc_460ex: get rid of global data
|
|
ata: sata_dwc_460ex: remove empty libata callback
|
|
ata: sata_dwc_460ex: get rid of some pointless casts
|
|
ata: sata_dwc_460ex: get rid of incorrect cast
|
|
ata: sata_dwc_460ex: add __iomem to register base pointer
|
|
ata: sata_dwc_460ex: use readl/writel_relaxed()
|
|
ata: sata_dwc_460ex: tidy up sata_dwc_clear_dmacr()
|
|
|
|
arch/powerpc/boot/dts/canyonlands.dts | 15 +-
|
|
drivers/ata/Kconfig | 12 +-
|
|
drivers/ata/sata_dwc_460ex.c | 552 +++++++++++++++++-----------------
|
|
3 files changed, 305 insertions(+), 274 deletions(-)
|
|
|
|
---
|
|
drivers/ata/sata_dwc_460ex.c | 552 ++++++++++++++++++++++---------------------
|
|
1 file changed, 283 insertions(+), 269 deletions(-)
|
|
|
|
--- a/drivers/ata/sata_dwc_460ex.c
|
|
+++ b/drivers/ata/sata_dwc_460ex.c
|
|
@@ -30,10 +30,12 @@
|
|
#include <linux/kernel.h>
|
|
#include <linux/module.h>
|
|
#include <linux/device.h>
|
|
+#include <linux/dmaengine.h>
|
|
#include <linux/of_address.h>
|
|
#include <linux/of_irq.h>
|
|
#include <linux/of_platform.h>
|
|
#include <linux/platform_device.h>
|
|
+#include <linux/phy/phy.h>
|
|
#include <linux/libata.h>
|
|
#include <linux/slab.h>
|
|
|
|
@@ -42,10 +44,6 @@
|
|
#include <scsi/scsi_host.h>
|
|
#include <scsi/scsi_cmnd.h>
|
|
|
|
-/* Supported DMA engine drivers */
|
|
-#include <linux/platform_data/dma-dw.h>
|
|
-#include <linux/dma/dw.h>
|
|
-
|
|
/* These two are defined in "libata.h" */
|
|
#undef DRV_NAME
|
|
#undef DRV_VERSION
|
|
@@ -53,19 +51,14 @@
|
|
#define DRV_NAME "sata-dwc"
|
|
#define DRV_VERSION "1.3"
|
|
|
|
-#ifndef out_le32
|
|
-#define out_le32(a, v) __raw_writel(__cpu_to_le32(v), (void __iomem *)(a))
|
|
-#endif
|
|
-
|
|
-#ifndef in_le32
|
|
-#define in_le32(a) __le32_to_cpu(__raw_readl((void __iomem *)(a)))
|
|
-#endif
|
|
+#define sata_dwc_writel(a, v) writel_relaxed(v, a)
|
|
+#define sata_dwc_readl(a) readl_relaxed(a)
|
|
|
|
#ifndef NO_IRQ
|
|
#define NO_IRQ 0
|
|
#endif
|
|
|
|
-#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length*/
|
|
+#define AHB_DMA_BRST_DFLT 64 /* 16 data items burst length */
|
|
|
|
enum {
|
|
SATA_DWC_MAX_PORTS = 1,
|
|
@@ -102,7 +95,7 @@ struct sata_dwc_regs {
|
|
u32 versionr; /* Version Register */
|
|
u32 idr; /* ID Register */
|
|
u32 unimpl[192]; /* Unimplemented */
|
|
- u32 dmadr[256]; /* FIFO Locations in DMA Mode */
|
|
+ u32 dmadr[256]; /* FIFO Locations in DMA Mode */
|
|
};
|
|
|
|
enum {
|
|
@@ -146,9 +139,14 @@ struct sata_dwc_device {
|
|
struct device *dev; /* generic device struct */
|
|
struct ata_probe_ent *pe; /* ptr to probe-ent */
|
|
struct ata_host *host;
|
|
- u8 __iomem *reg_base;
|
|
- struct sata_dwc_regs *sata_dwc_regs; /* DW Synopsys SATA specific */
|
|
+ struct sata_dwc_regs __iomem *sata_dwc_regs; /* DW SATA specific */
|
|
+ u32 sactive_issued;
|
|
+ u32 sactive_queued;
|
|
+ struct phy *phy;
|
|
+ phys_addr_t dmadr;
|
|
+#ifdef CONFIG_SATA_DWC_OLD_DMA
|
|
struct dw_dma_chip *dma;
|
|
+#endif
|
|
};
|
|
|
|
#define SATA_DWC_QCMD_MAX 32
|
|
@@ -159,25 +157,19 @@ struct sata_dwc_device_port {
|
|
int dma_pending[SATA_DWC_QCMD_MAX];
|
|
|
|
/* DMA info */
|
|
- struct dw_dma_slave *dws;
|
|
struct dma_chan *chan;
|
|
struct dma_async_tx_descriptor *desc[SATA_DWC_QCMD_MAX];
|
|
u32 dma_interrupt_count;
|
|
};
|
|
|
|
/*
|
|
- * Commonly used DWC SATA driver Macros
|
|
+ * Commonly used DWC SATA driver macros
|
|
*/
|
|
-#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)\
|
|
- (host)->private_data)
|
|
-#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)\
|
|
- (ap)->host->private_data)
|
|
-#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)\
|
|
- (ap)->private_data)
|
|
-#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)\
|
|
- (qc)->ap->host->private_data)
|
|
-#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)\
|
|
- (hsdevp)->hsdev)
|
|
+#define HSDEV_FROM_HOST(host) ((struct sata_dwc_device *)(host)->private_data)
|
|
+#define HSDEV_FROM_AP(ap) ((struct sata_dwc_device *)(ap)->host->private_data)
|
|
+#define HSDEVP_FROM_AP(ap) ((struct sata_dwc_device_port *)(ap)->private_data)
|
|
+#define HSDEV_FROM_QC(qc) ((struct sata_dwc_device *)(qc)->ap->host->private_data)
|
|
+#define HSDEV_FROM_HSDEVP(p) ((struct sata_dwc_device *)(p)->hsdev)
|
|
|
|
enum {
|
|
SATA_DWC_CMD_ISSUED_NOT = 0,
|
|
@@ -190,21 +182,6 @@ enum {
|
|
SATA_DWC_DMA_PENDING_RX = 2,
|
|
};
|
|
|
|
-struct sata_dwc_host_priv {
|
|
- void __iomem *scr_addr_sstatus;
|
|
- u32 sata_dwc_sactive_issued ;
|
|
- u32 sata_dwc_sactive_queued ;
|
|
-};
|
|
-
|
|
-static struct sata_dwc_host_priv host_pvt;
|
|
-
|
|
-static struct dw_dma_slave sata_dwc_dma_dws = {
|
|
- .src_id = 0,
|
|
- .dst_id = 0,
|
|
- .src_master = 0,
|
|
- .dst_master = 1,
|
|
-};
|
|
-
|
|
/*
|
|
* Prototypes
|
|
*/
|
|
@@ -215,6 +192,93 @@ static void sata_dwc_dma_xfer_complete(s
|
|
static void sata_dwc_port_stop(struct ata_port *ap);
|
|
static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag);
|
|
|
|
+#ifdef CONFIG_SATA_DWC_OLD_DMA
|
|
+
|
|
+#include <linux/platform_data/dma-dw.h>
|
|
+#include <linux/dma/dw.h>
|
|
+
|
|
+static struct dw_dma_slave sata_dwc_dma_dws = {
|
|
+ .src_id = 0,
|
|
+ .dst_id = 0,
|
|
+ .m_master = 1,
|
|
+ .p_master = 0,
|
|
+};
|
|
+
|
|
+static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
|
|
+{
|
|
+ struct dw_dma_slave *dws = &sata_dwc_dma_dws;
|
|
+
|
|
+ if (dws->dma_dev != chan->device->dev)
|
|
+ return false;
|
|
+
|
|
+ chan->private = dws;
|
|
+ return true;
|
|
+}
|
|
+
|
|
+static int sata_dwc_dma_get_channel_old(struct sata_dwc_device_port *hsdevp)
|
|
+{
|
|
+ struct sata_dwc_device *hsdev = hsdevp->hsdev;
|
|
+ struct dw_dma_slave *dws = &sata_dwc_dma_dws;
|
|
+ dma_cap_mask_t mask;
|
|
+
|
|
+ dws->dma_dev = hsdev->dev;
|
|
+
|
|
+ dma_cap_zero(mask);
|
|
+ dma_cap_set(DMA_SLAVE, mask);
|
|
+
|
|
+ /* Acquire DMA channel */
|
|
+ hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
|
|
+ if (!hsdevp->chan) {
|
|
+ dev_err(hsdev->dev, "%s: dma channel unavailable\n",
|
|
+ __func__);
|
|
+ return -EAGAIN;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static int sata_dwc_dma_init_old(struct platform_device *pdev,
|
|
+ struct sata_dwc_device *hsdev)
|
|
+{
|
|
+ struct device_node *np = pdev->dev.of_node;
|
|
+ struct resource *res;
|
|
+
|
|
+ hsdev->dma = devm_kzalloc(&pdev->dev, sizeof(*hsdev->dma), GFP_KERNEL);
|
|
+ if (!hsdev->dma)
|
|
+ return -ENOMEM;
|
|
+
|
|
+ hsdev->dma->dev = &pdev->dev;
|
|
+
|
|
+ /* Get SATA DMA interrupt number */
|
|
+ hsdev->dma->irq = irq_of_parse_and_map(np, 1);
|
|
+ if (hsdev->dma->irq == NO_IRQ) {
|
|
+ dev_err(&pdev->dev, "no SATA DMA irq\n");
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ /* Get physical SATA DMA register base address */
|
|
+ res = platform_get_resource(pdev, IORESOURCE_MEM, 1);
|
|
+ hsdev->dma->regs = devm_ioremap_resource(&pdev->dev, res);
|
|
+ if (IS_ERR(hsdev->dma->regs)) {
|
|
+ dev_err(&pdev->dev,
|
|
+ "ioremap failed for AHBDMA register address\n");
|
|
+ return PTR_ERR(hsdev->dma->regs);
|
|
+ }
|
|
+
|
|
+ /* Initialize AHB DMAC */
|
|
+ return dw_dma_probe(hsdev->dma);
|
|
+}
|
|
+
|
|
+static void sata_dwc_dma_exit_old(struct sata_dwc_device *hsdev)
|
|
+{
|
|
+ if (!hsdev->dma)
|
|
+ return;
|
|
+
|
|
+ dw_dma_remove(hsdev->dma);
|
|
+}
|
|
+
|
|
+#endif
|
|
+
|
|
static const char *get_prot_descript(u8 protocol)
|
|
{
|
|
switch ((enum ata_tf_protocols)protocol) {
|
|
@@ -305,21 +369,20 @@ static struct dma_async_tx_descriptor *d
|
|
struct ata_port *ap = qc->ap;
|
|
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
|
|
struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
|
|
- dma_addr_t addr = (dma_addr_t)&hsdev->sata_dwc_regs->dmadr;
|
|
struct dma_slave_config sconf;
|
|
struct dma_async_tx_descriptor *desc;
|
|
|
|
if (qc->dma_dir == DMA_DEV_TO_MEM) {
|
|
- sconf.src_addr = addr;
|
|
- sconf.device_fc = true;
|
|
+ sconf.src_addr = hsdev->dmadr;
|
|
+ sconf.device_fc = false;
|
|
} else { /* DMA_MEM_TO_DEV */
|
|
- sconf.dst_addr = addr;
|
|
+ sconf.dst_addr = hsdev->dmadr;
|
|
sconf.device_fc = false;
|
|
}
|
|
|
|
sconf.direction = qc->dma_dir;
|
|
- sconf.src_maxburst = AHB_DMA_BRST_DFLT;
|
|
- sconf.dst_maxburst = AHB_DMA_BRST_DFLT;
|
|
+ sconf.src_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
|
|
+ sconf.dst_maxburst = AHB_DMA_BRST_DFLT / 4; /* in items */
|
|
sconf.src_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
sconf.dst_addr_width = DMA_SLAVE_BUSWIDTH_4_BYTES;
|
|
|
|
@@ -336,8 +399,8 @@ static struct dma_async_tx_descriptor *d
|
|
desc->callback = dma_dwc_xfer_done;
|
|
desc->callback_param = hsdev;
|
|
|
|
- dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pad\n",
|
|
- __func__, qc->sg, qc->n_elem, &addr);
|
|
+ dev_dbg(hsdev->dev, "%s sg: 0x%p, count: %d addr: %pa\n", __func__,
|
|
+ qc->sg, qc->n_elem, &hsdev->dmadr);
|
|
|
|
return desc;
|
|
}
|
|
@@ -350,48 +413,38 @@ static int sata_dwc_scr_read(struct ata_
|
|
return -EINVAL;
|
|
}
|
|
|
|
- *val = in_le32(link->ap->ioaddr.scr_addr + (scr * 4));
|
|
- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
|
|
- __func__, link->ap->print_id, scr, *val);
|
|
+ *val = sata_dwc_readl(link->ap->ioaddr.scr_addr + (scr * 4));
|
|
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
|
|
+ link->ap->print_id, scr, *val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
static int sata_dwc_scr_write(struct ata_link *link, unsigned int scr, u32 val)
|
|
{
|
|
- dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=val=0x%08x\n",
|
|
- __func__, link->ap->print_id, scr, val);
|
|
+ dev_dbg(link->ap->dev, "%s: id=%d reg=%d val=0x%08x\n", __func__,
|
|
+ link->ap->print_id, scr, val);
|
|
if (scr > SCR_NOTIFICATION) {
|
|
dev_err(link->ap->dev, "%s: Incorrect SCR offset 0x%02x\n",
|
|
__func__, scr);
|
|
return -EINVAL;
|
|
}
|
|
- out_le32(link->ap->ioaddr.scr_addr + (scr * 4), val);
|
|
+ sata_dwc_writel(link->ap->ioaddr.scr_addr + (scr * 4), val);
|
|
|
|
return 0;
|
|
}
|
|
|
|
-static u32 core_scr_read(unsigned int scr)
|
|
-{
|
|
- return in_le32(host_pvt.scr_addr_sstatus + (scr * 4));
|
|
-}
|
|
-
|
|
-static void core_scr_write(unsigned int scr, u32 val)
|
|
-{
|
|
- out_le32(host_pvt.scr_addr_sstatus + (scr * 4), val);
|
|
-}
|
|
-
|
|
-static void clear_serror(void)
|
|
+static void clear_serror(struct ata_port *ap)
|
|
{
|
|
u32 val;
|
|
- val = core_scr_read(SCR_ERROR);
|
|
- core_scr_write(SCR_ERROR, val);
|
|
+ sata_dwc_scr_read(&ap->link, SCR_ERROR, &val);
|
|
+ sata_dwc_scr_write(&ap->link, SCR_ERROR, val);
|
|
}
|
|
|
|
static void clear_interrupt_bit(struct sata_dwc_device *hsdev, u32 bit)
|
|
{
|
|
- out_le32(&hsdev->sata_dwc_regs->intpr,
|
|
- in_le32(&hsdev->sata_dwc_regs->intpr));
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->intpr,
|
|
+ sata_dwc_readl(&hsdev->sata_dwc_regs->intpr));
|
|
}
|
|
|
|
static u32 qcmd_tag_to_mask(u8 tag)
|
|
@@ -412,7 +465,7 @@ static void sata_dwc_error_intr(struct a
|
|
|
|
ata_ehi_clear_desc(ehi);
|
|
|
|
- serror = core_scr_read(SCR_ERROR);
|
|
+ sata_dwc_scr_read(&ap->link, SCR_ERROR, &serror);
|
|
status = ap->ops->sff_check_status(ap);
|
|
|
|
tag = ap->link.active_tag;
|
|
@@ -423,7 +476,7 @@ static void sata_dwc_error_intr(struct a
|
|
hsdevp->dma_pending[tag], hsdevp->cmd_issued[tag]);
|
|
|
|
/* Clear error register and interrupt bit */
|
|
- clear_serror();
|
|
+ clear_serror(ap);
|
|
clear_interrupt_bit(hsdev, SATA_DWC_INTPR_ERR);
|
|
|
|
/* This is the only error happening now. TODO check for exact error */
|
|
@@ -462,12 +515,12 @@ static irqreturn_t sata_dwc_isr(int irq,
|
|
int handled, num_processed, port = 0;
|
|
uint intpr, sactive, sactive2, tag_mask;
|
|
struct sata_dwc_device_port *hsdevp;
|
|
- host_pvt.sata_dwc_sactive_issued = 0;
|
|
+ hsdev->sactive_issued = 0;
|
|
|
|
spin_lock_irqsave(&host->lock, flags);
|
|
|
|
/* Read the interrupt register */
|
|
- intpr = in_le32(&hsdev->sata_dwc_regs->intpr);
|
|
+ intpr = sata_dwc_readl(&hsdev->sata_dwc_regs->intpr);
|
|
|
|
ap = host->ports[port];
|
|
hsdevp = HSDEVP_FROM_AP(ap);
|
|
@@ -486,12 +539,12 @@ static irqreturn_t sata_dwc_isr(int irq,
|
|
if (intpr & SATA_DWC_INTPR_NEWFP) {
|
|
clear_interrupt_bit(hsdev, SATA_DWC_INTPR_NEWFP);
|
|
|
|
- tag = (u8)(in_le32(&hsdev->sata_dwc_regs->fptagr));
|
|
+ tag = (u8)(sata_dwc_readl(&hsdev->sata_dwc_regs->fptagr));
|
|
dev_dbg(ap->dev, "%s: NEWFP tag=%d\n", __func__, tag);
|
|
if (hsdevp->cmd_issued[tag] != SATA_DWC_CMD_ISSUED_PEND)
|
|
dev_warn(ap->dev, "CMD tag=%d not pending?\n", tag);
|
|
|
|
- host_pvt.sata_dwc_sactive_issued |= qcmd_tag_to_mask(tag);
|
|
+ hsdev->sactive_issued |= qcmd_tag_to_mask(tag);
|
|
|
|
qc = ata_qc_from_tag(ap, tag);
|
|
/*
|
|
@@ -505,11 +558,11 @@ static irqreturn_t sata_dwc_isr(int irq,
|
|
handled = 1;
|
|
goto DONE;
|
|
}
|
|
- sactive = core_scr_read(SCR_ACTIVE);
|
|
- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
|
|
+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
|
|
+ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
|
|
|
|
/* If no sactive issued and tag_mask is zero then this is not NCQ */
|
|
- if (host_pvt.sata_dwc_sactive_issued == 0 && tag_mask == 0) {
|
|
+ if (hsdev->sactive_issued == 0 && tag_mask == 0) {
|
|
if (ap->link.active_tag == ATA_TAG_POISON)
|
|
tag = 0;
|
|
else
|
|
@@ -579,22 +632,19 @@ DRVSTILLBUSY:
|
|
*/
|
|
|
|
/* process completed commands */
|
|
- sactive = core_scr_read(SCR_ACTIVE);
|
|
- tag_mask = (host_pvt.sata_dwc_sactive_issued | sactive) ^ sactive;
|
|
+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
|
|
+ tag_mask = (hsdev->sactive_issued | sactive) ^ sactive;
|
|
|
|
- if (sactive != 0 || (host_pvt.sata_dwc_sactive_issued) > 1 || \
|
|
- tag_mask > 1) {
|
|
+ if (sactive != 0 || hsdev->sactive_issued > 1 || tag_mask > 1) {
|
|
dev_dbg(ap->dev,
|
|
"%s NCQ:sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
|
|
- __func__, sactive, host_pvt.sata_dwc_sactive_issued,
|
|
- tag_mask);
|
|
+ __func__, sactive, hsdev->sactive_issued, tag_mask);
|
|
}
|
|
|
|
- if ((tag_mask | (host_pvt.sata_dwc_sactive_issued)) != \
|
|
- (host_pvt.sata_dwc_sactive_issued)) {
|
|
+ if ((tag_mask | hsdev->sactive_issued) != hsdev->sactive_issued) {
|
|
dev_warn(ap->dev,
|
|
- "Bad tag mask? sactive=0x%08x (host_pvt.sata_dwc_sactive_issued)=0x%08x tag_mask=0x%08x\n",
|
|
- sactive, host_pvt.sata_dwc_sactive_issued, tag_mask);
|
|
+ "Bad tag mask? sactive=0x%08x sactive_issued=0x%08x tag_mask=0x%08x\n",
|
|
+ sactive, hsdev->sactive_issued, tag_mask);
|
|
}
|
|
|
|
/* read just to clear ... not bad if currently still busy */
|
|
@@ -656,7 +706,7 @@ STILLBUSY:
|
|
* we were processing --we read status as part of processing a completed
|
|
* command).
|
|
*/
|
|
- sactive2 = core_scr_read(SCR_ACTIVE);
|
|
+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive2);
|
|
if (sactive2 != sactive) {
|
|
dev_dbg(ap->dev,
|
|
"More completed - sactive=0x%x sactive2=0x%x\n",
|
|
@@ -672,15 +722,14 @@ DONE:
|
|
static void sata_dwc_clear_dmacr(struct sata_dwc_device_port *hsdevp, u8 tag)
|
|
{
|
|
struct sata_dwc_device *hsdev = HSDEV_FROM_HSDEVP(hsdevp);
|
|
+ u32 dmacr = sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr);
|
|
|
|
if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_RX) {
|
|
- out_le32(&(hsdev->sata_dwc_regs->dmacr),
|
|
- SATA_DWC_DMACR_RX_CLEAR(
|
|
- in_le32(&(hsdev->sata_dwc_regs->dmacr))));
|
|
+ dmacr = SATA_DWC_DMACR_RX_CLEAR(dmacr);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
|
|
} else if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX) {
|
|
- out_le32(&(hsdev->sata_dwc_regs->dmacr),
|
|
- SATA_DWC_DMACR_TX_CLEAR(
|
|
- in_le32(&(hsdev->sata_dwc_regs->dmacr))));
|
|
+ dmacr = SATA_DWC_DMACR_TX_CLEAR(dmacr);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr, dmacr);
|
|
} else {
|
|
/*
|
|
* This should not happen, it indicates the driver is out of
|
|
@@ -688,10 +737,9 @@ static void sata_dwc_clear_dmacr(struct
|
|
*/
|
|
dev_err(hsdev->dev,
|
|
"%s DMA protocol RX and TX DMA not pending tag=0x%02x pending=%d dmacr: 0x%08x\n",
|
|
- __func__, tag, hsdevp->dma_pending[tag],
|
|
- in_le32(&hsdev->sata_dwc_regs->dmacr));
|
|
- out_le32(&(hsdev->sata_dwc_regs->dmacr),
|
|
- SATA_DWC_DMACR_TXRXCH_CLEAR);
|
|
+ __func__, tag, hsdevp->dma_pending[tag], dmacr);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
|
|
+ SATA_DWC_DMACR_TXRXCH_CLEAR);
|
|
}
|
|
}
|
|
|
|
@@ -716,7 +764,7 @@ static void sata_dwc_dma_xfer_complete(s
|
|
__func__, qc->tag, qc->tf.command,
|
|
get_dma_dir_descript(qc->dma_dir),
|
|
get_prot_descript(qc->tf.protocol),
|
|
- in_le32(&(hsdev->sata_dwc_regs->dmacr)));
|
|
+ sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
|
|
}
|
|
#endif
|
|
|
|
@@ -725,7 +773,7 @@ static void sata_dwc_dma_xfer_complete(s
|
|
dev_err(ap->dev,
|
|
"%s DMA protocol RX and TX DMA not pending dmacr: 0x%08x\n",
|
|
__func__,
|
|
- in_le32(&(hsdev->sata_dwc_regs->dmacr)));
|
|
+ sata_dwc_readl(&hsdev->sata_dwc_regs->dmacr));
|
|
}
|
|
|
|
hsdevp->dma_pending[tag] = SATA_DWC_DMA_PENDING_NONE;
|
|
@@ -742,8 +790,9 @@ static int sata_dwc_qc_complete(struct a
|
|
u8 status = 0;
|
|
u32 mask = 0x0;
|
|
u8 tag = qc->tag;
|
|
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
|
|
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
|
|
- host_pvt.sata_dwc_sactive_queued = 0;
|
|
+ hsdev->sactive_queued = 0;
|
|
dev_dbg(ap->dev, "%s checkstatus? %x\n", __func__, check_status);
|
|
|
|
if (hsdevp->dma_pending[tag] == SATA_DWC_DMA_PENDING_TX)
|
|
@@ -756,10 +805,8 @@ static int sata_dwc_qc_complete(struct a
|
|
|
|
/* clear active bit */
|
|
mask = (~(qcmd_tag_to_mask(tag)));
|
|
- host_pvt.sata_dwc_sactive_queued = (host_pvt.sata_dwc_sactive_queued) \
|
|
- & mask;
|
|
- host_pvt.sata_dwc_sactive_issued = (host_pvt.sata_dwc_sactive_issued) \
|
|
- & mask;
|
|
+ hsdev->sactive_queued = hsdev->sactive_queued & mask;
|
|
+ hsdev->sactive_issued = hsdev->sactive_issued & mask;
|
|
ata_qc_complete(qc);
|
|
return 0;
|
|
}
|
|
@@ -767,54 +814,62 @@ static int sata_dwc_qc_complete(struct a
|
|
static void sata_dwc_enable_interrupts(struct sata_dwc_device *hsdev)
|
|
{
|
|
/* Enable selective interrupts by setting the interrupt maskregister*/
|
|
- out_le32(&hsdev->sata_dwc_regs->intmr,
|
|
- SATA_DWC_INTMR_ERRM |
|
|
- SATA_DWC_INTMR_NEWFPM |
|
|
- SATA_DWC_INTMR_PMABRTM |
|
|
- SATA_DWC_INTMR_DMATM);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->intmr,
|
|
+ SATA_DWC_INTMR_ERRM |
|
|
+ SATA_DWC_INTMR_NEWFPM |
|
|
+ SATA_DWC_INTMR_PMABRTM |
|
|
+ SATA_DWC_INTMR_DMATM);
|
|
/*
|
|
* Unmask the error bits that should trigger an error interrupt by
|
|
* setting the error mask register.
|
|
*/
|
|
- out_le32(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->errmr, SATA_DWC_SERROR_ERR_BITS);
|
|
|
|
dev_dbg(hsdev->dev, "%s: INTMR = 0x%08x, ERRMR = 0x%08x\n",
|
|
- __func__, in_le32(&hsdev->sata_dwc_regs->intmr),
|
|
- in_le32(&hsdev->sata_dwc_regs->errmr));
|
|
+ __func__, sata_dwc_readl(&hsdev->sata_dwc_regs->intmr),
|
|
+ sata_dwc_readl(&hsdev->sata_dwc_regs->errmr));
|
|
}
|
|
|
|
-static bool sata_dwc_dma_filter(struct dma_chan *chan, void *param)
|
|
+static void sata_dwc_setup_port(struct ata_ioports *port, void __iomem *base)
|
|
{
|
|
- struct sata_dwc_device_port *hsdevp = param;
|
|
- struct dw_dma_slave *dws = hsdevp->dws;
|
|
+ port->cmd_addr = base + 0x00;
|
|
+ port->data_addr = base + 0x00;
|
|
|
|
- if (dws->dma_dev != chan->device->dev)
|
|
- return false;
|
|
+ port->error_addr = base + 0x04;
|
|
+ port->feature_addr = base + 0x04;
|
|
|
|
- chan->private = dws;
|
|
- return true;
|
|
-}
|
|
+ port->nsect_addr = base + 0x08;
|
|
|
|
-static void sata_dwc_setup_port(struct ata_ioports *port, unsigned long base)
|
|
-{
|
|
- port->cmd_addr = (void __iomem *)base + 0x00;
|
|
- port->data_addr = (void __iomem *)base + 0x00;
|
|
+ port->lbal_addr = base + 0x0c;
|
|
+ port->lbam_addr = base + 0x10;
|
|
+ port->lbah_addr = base + 0x14;
|
|
+
|
|
+ port->device_addr = base + 0x18;
|
|
+ port->command_addr = base + 0x1c;
|
|
+ port->status_addr = base + 0x1c;
|
|
|
|
- port->error_addr = (void __iomem *)base + 0x04;
|
|
- port->feature_addr = (void __iomem *)base + 0x04;
|
|
+ port->altstatus_addr = base + 0x20;
|
|
+ port->ctl_addr = base + 0x20;
|
|
+}
|
|
|
|
- port->nsect_addr = (void __iomem *)base + 0x08;
|
|
+static int sata_dwc_dma_get_channel(struct sata_dwc_device_port *hsdevp)
|
|
+{
|
|
+ struct sata_dwc_device *hsdev = hsdevp->hsdev;
|
|
+ struct device *dev = hsdev->dev;
|
|
|
|
- port->lbal_addr = (void __iomem *)base + 0x0c;
|
|
- port->lbam_addr = (void __iomem *)base + 0x10;
|
|
- port->lbah_addr = (void __iomem *)base + 0x14;
|
|
+#ifdef CONFIG_SATA_DWC_OLD_DMA
|
|
+ if (!of_find_property(dev->of_node, "dmas", NULL))
|
|
+ return sata_dwc_dma_get_channel_old(hsdevp);
|
|
+#endif
|
|
|
|
- port->device_addr = (void __iomem *)base + 0x18;
|
|
- port->command_addr = (void __iomem *)base + 0x1c;
|
|
- port->status_addr = (void __iomem *)base + 0x1c;
|
|
+ hsdevp->chan = dma_request_chan(dev, "sata-dma");
|
|
+ if (IS_ERR(hsdevp->chan)) {
|
|
+ dev_err(dev, "failed to allocate dma channel: %ld\n",
|
|
+ PTR_ERR(hsdevp->chan));
|
|
+ return PTR_ERR(hsdevp->chan);
|
|
+ }
|
|
|
|
- port->altstatus_addr = (void __iomem *)base + 0x20;
|
|
- port->ctl_addr = (void __iomem *)base + 0x20;
|
|
+ return 0;
|
|
}
|
|
|
|
/*
|
|
@@ -829,7 +884,6 @@ static int sata_dwc_port_start(struct at
|
|
struct sata_dwc_device *hsdev;
|
|
struct sata_dwc_device_port *hsdevp = NULL;
|
|
struct device *pdev;
|
|
- dma_cap_mask_t mask;
|
|
int i;
|
|
|
|
hsdev = HSDEV_FROM_AP(ap);
|
|
@@ -853,20 +907,13 @@ static int sata_dwc_port_start(struct at
|
|
}
|
|
hsdevp->hsdev = hsdev;
|
|
|
|
- hsdevp->dws = &sata_dwc_dma_dws;
|
|
- hsdevp->dws->dma_dev = hsdev->dev;
|
|
-
|
|
- dma_cap_zero(mask);
|
|
- dma_cap_set(DMA_SLAVE, mask);
|
|
+ err = sata_dwc_dma_get_channel(hsdevp);
|
|
+ if (err)
|
|
+ goto CLEANUP_ALLOC;
|
|
|
|
- /* Acquire DMA channel */
|
|
- hsdevp->chan = dma_request_channel(mask, sata_dwc_dma_filter, hsdevp);
|
|
- if (!hsdevp->chan) {
|
|
- dev_err(hsdev->dev, "%s: dma channel unavailable\n",
|
|
- __func__);
|
|
- err = -EAGAIN;
|
|
+ err = phy_power_on(hsdev->phy);
|
|
+ if (err)
|
|
goto CLEANUP_ALLOC;
|
|
- }
|
|
|
|
for (i = 0; i < SATA_DWC_QCMD_MAX; i++)
|
|
hsdevp->cmd_issued[i] = SATA_DWC_CMD_ISSUED_NOT;
|
|
@@ -877,18 +924,18 @@ static int sata_dwc_port_start(struct at
|
|
if (ap->port_no == 0) {
|
|
dev_dbg(ap->dev, "%s: clearing TXCHEN, RXCHEN in DMAC\n",
|
|
__func__);
|
|
- out_le32(&hsdev->sata_dwc_regs->dmacr,
|
|
- SATA_DWC_DMACR_TXRXCH_CLEAR);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
|
|
+ SATA_DWC_DMACR_TXRXCH_CLEAR);
|
|
|
|
dev_dbg(ap->dev, "%s: setting burst size in DBTSR\n",
|
|
__func__);
|
|
- out_le32(&hsdev->sata_dwc_regs->dbtsr,
|
|
- (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
|
|
- SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
|
|
+ (SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
|
|
+ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT)));
|
|
}
|
|
|
|
/* Clear any error bits before libata starts issuing commands */
|
|
- clear_serror();
|
|
+ clear_serror(ap);
|
|
ap->private_data = hsdevp;
|
|
dev_dbg(ap->dev, "%s: done\n", __func__);
|
|
return 0;
|
|
@@ -903,11 +950,13 @@ CLEANUP:
|
|
static void sata_dwc_port_stop(struct ata_port *ap)
|
|
{
|
|
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
|
|
+ struct sata_dwc_device *hsdev = HSDEV_FROM_AP(ap);
|
|
|
|
dev_dbg(ap->dev, "%s: ap->id = %d\n", __func__, ap->print_id);
|
|
|
|
- dmaengine_terminate_all(hsdevp->chan);
|
|
+ dmaengine_terminate_sync(hsdevp->chan);
|
|
dma_release_channel(hsdevp->chan);
|
|
+ phy_power_off(hsdev->phy);
|
|
|
|
kfree(hsdevp);
|
|
ap->private_data = NULL;
|
|
@@ -924,22 +973,20 @@ static void sata_dwc_exec_command_by_tag
|
|
struct ata_taskfile *tf,
|
|
u8 tag, u32 cmd_issued)
|
|
{
|
|
- unsigned long flags;
|
|
struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
|
|
|
|
dev_dbg(ap->dev, "%s cmd(0x%02x): %s tag=%d\n", __func__, tf->command,
|
|
ata_get_cmd_descript(tf->command), tag);
|
|
|
|
- spin_lock_irqsave(&ap->host->lock, flags);
|
|
hsdevp->cmd_issued[tag] = cmd_issued;
|
|
- spin_unlock_irqrestore(&ap->host->lock, flags);
|
|
+
|
|
/*
|
|
* Clear SError before executing a new command.
|
|
* sata_dwc_scr_write and read can not be used here. Clearing the PM
|
|
* managed SError register for the disk needs to be done before the
|
|
* task file is loaded.
|
|
*/
|
|
- clear_serror();
|
|
+ clear_serror(ap);
|
|
ata_sff_exec_command(ap, tf);
|
|
}
|
|
|
|
@@ -992,18 +1039,18 @@ static void sata_dwc_bmdma_start_by_tag(
|
|
sata_dwc_tf_dump(ap, &qc->tf);
|
|
|
|
if (start_dma) {
|
|
- reg = core_scr_read(SCR_ERROR);
|
|
+ sata_dwc_scr_read(&ap->link, SCR_ERROR, ®);
|
|
if (reg & SATA_DWC_SERROR_ERR_BITS) {
|
|
dev_err(ap->dev, "%s: ****** SError=0x%08x ******\n",
|
|
__func__, reg);
|
|
}
|
|
|
|
if (dir == DMA_TO_DEVICE)
|
|
- out_le32(&hsdev->sata_dwc_regs->dmacr,
|
|
- SATA_DWC_DMACR_TXCHEN);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
|
|
+ SATA_DWC_DMACR_TXCHEN);
|
|
else
|
|
- out_le32(&hsdev->sata_dwc_regs->dmacr,
|
|
- SATA_DWC_DMACR_RXCHEN);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
|
|
+ SATA_DWC_DMACR_RXCHEN);
|
|
|
|
/* Enable AHB DMA transfer on the specified channel */
|
|
dmaengine_submit(desc);
|
|
@@ -1025,36 +1072,12 @@ static void sata_dwc_bmdma_start(struct
|
|
sata_dwc_bmdma_start_by_tag(qc, tag);
|
|
}
|
|
|
|
-/*
|
|
- * Function : sata_dwc_qc_prep_by_tag
|
|
- * arguments : ata_queued_cmd *qc, u8 tag
|
|
- * Return value : None
|
|
- * qc_prep for a particular queued command based on tag
|
|
- */
|
|
-static void sata_dwc_qc_prep_by_tag(struct ata_queued_cmd *qc, u8 tag)
|
|
-{
|
|
- struct dma_async_tx_descriptor *desc;
|
|
- struct ata_port *ap = qc->ap;
|
|
- struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
|
|
-
|
|
- dev_dbg(ap->dev, "%s: port=%d dma dir=%s n_elem=%d\n",
|
|
- __func__, ap->port_no, get_dma_dir_descript(qc->dma_dir),
|
|
- qc->n_elem);
|
|
-
|
|
- desc = dma_dwc_xfer_setup(qc);
|
|
- if (!desc) {
|
|
- dev_err(ap->dev, "%s: dma_dwc_xfer_setup returns NULL\n",
|
|
- __func__);
|
|
- return;
|
|
- }
|
|
- hsdevp->desc[tag] = desc;
|
|
-}
|
|
-
|
|
static unsigned int sata_dwc_qc_issue(struct ata_queued_cmd *qc)
|
|
{
|
|
u32 sactive;
|
|
u8 tag = qc->tag;
|
|
struct ata_port *ap = qc->ap;
|
|
+ struct sata_dwc_device_port *hsdevp = HSDEVP_FROM_AP(ap);
|
|
|
|
#ifdef DEBUG_NCQ
|
|
if (qc->tag > 0 || ap->link.sactive > 1)
|
|
@@ -1068,47 +1091,33 @@ static unsigned int sata_dwc_qc_issue(st
|
|
|
|
if (!ata_is_ncq(qc->tf.protocol))
|
|
tag = 0;
|
|
- sata_dwc_qc_prep_by_tag(qc, tag);
|
|
+
|
|
+ if (ata_is_dma(qc->tf.protocol)) {
|
|
+ hsdevp->desc[tag] = dma_dwc_xfer_setup(qc);
|
|
+ if (!hsdevp->desc[tag])
|
|
+ return AC_ERR_SYSTEM;
|
|
+ } else {
|
|
+ hsdevp->desc[tag] = NULL;
|
|
+ }
|
|
|
|
if (ata_is_ncq(qc->tf.protocol)) {
|
|
- sactive = core_scr_read(SCR_ACTIVE);
|
|
+ sata_dwc_scr_read(&ap->link, SCR_ACTIVE, &sactive);
|
|
sactive |= (0x00000001 << tag);
|
|
- core_scr_write(SCR_ACTIVE, sactive);
|
|
+ sata_dwc_scr_write(&ap->link, SCR_ACTIVE, sactive);
|
|
|
|
dev_dbg(qc->ap->dev,
|
|
"%s: tag=%d ap->link.sactive = 0x%08x sactive=0x%08x\n",
|
|
__func__, tag, qc->ap->link.sactive, sactive);
|
|
|
|
ap->ops->sff_tf_load(ap, &qc->tf);
|
|
- sata_dwc_exec_command_by_tag(ap, &qc->tf, qc->tag,
|
|
+ sata_dwc_exec_command_by_tag(ap, &qc->tf, tag,
|
|
SATA_DWC_CMD_ISSUED_PEND);
|
|
} else {
|
|
- ata_sff_qc_issue(qc);
|
|
+ return ata_bmdma_qc_issue(qc);
|
|
}
|
|
return 0;
|
|
}
|
|
|
|
-/*
|
|
- * Function : sata_dwc_qc_prep
|
|
- * arguments : ata_queued_cmd *qc
|
|
- * Return value : None
|
|
- * qc_prep for a particular queued command
|
|
- */
|
|
-
|
|
-static void sata_dwc_qc_prep(struct ata_queued_cmd *qc)
|
|
-{
|
|
- if ((qc->dma_dir == DMA_NONE) || (qc->tf.protocol == ATA_PROT_PIO))
|
|
- return;
|
|
-
|
|
-#ifdef DEBUG_NCQ
|
|
- if (qc->tag > 0)
|
|
- dev_info(qc->ap->dev, "%s: qc->tag=%d ap->active_tag=0x%08x\n",
|
|
- __func__, qc->tag, qc->ap->link.active_tag);
|
|
-
|
|
- return ;
|
|
-#endif
|
|
-}
|
|
-
|
|
static void sata_dwc_error_handler(struct ata_port *ap)
|
|
{
|
|
ata_sff_error_handler(ap);
|
|
@@ -1125,17 +1134,22 @@ static int sata_dwc_hardreset(struct ata
|
|
sata_dwc_enable_interrupts(hsdev);
|
|
|
|
/* Reconfigure the DMA control register */
|
|
- out_le32(&hsdev->sata_dwc_regs->dmacr,
|
|
- SATA_DWC_DMACR_TXRXCH_CLEAR);
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dmacr,
|
|
+ SATA_DWC_DMACR_TXRXCH_CLEAR);
|
|
|
|
/* Reconfigure the DMA Burst Transaction Size register */
|
|
- out_le32(&hsdev->sata_dwc_regs->dbtsr,
|
|
- SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
|
|
- SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
|
|
+ sata_dwc_writel(&hsdev->sata_dwc_regs->dbtsr,
|
|
+ SATA_DWC_DBTSR_MWR(AHB_DMA_BRST_DFLT) |
|
|
+ SATA_DWC_DBTSR_MRD(AHB_DMA_BRST_DFLT));
|
|
|
|
return ret;
|
|
}
|
|
|
|
+static void sata_dwc_dev_select(struct ata_port *ap, unsigned int device)
|
|
+{
|
|
+ /* SATA DWC is master only */
|
|
+}
|
|
+
|
|
/*
|
|
* scsi mid-layer and libata interface structures
|
|
*/
|
|
@@ -1148,7 +1162,13 @@ static struct scsi_host_template sata_dw
|
|
*/
|
|
.sg_tablesize = LIBATA_MAX_PRD,
|
|
/* .can_queue = ATA_MAX_QUEUE, */
|
|
- .dma_boundary = ATA_DMA_BOUNDARY,
|
|
+ /*
|
|
+ * Make sure a LLI block is not created that will span 8K max FIS
|
|
+ * boundary. If the block spans such a FIS boundary, there is a chance
|
|
+ * that a DMA burst will cross that boundary -- this results in an
|
|
+ * error in the host controller.
|
|
+ */
|
|
+ .dma_boundary = 0x1fff /* ATA_DMA_BOUNDARY */,
|
|
};
|
|
|
|
static struct ata_port_operations sata_dwc_ops = {
|
|
@@ -1157,7 +1177,6 @@ static struct ata_port_operations sata_d
|
|
.error_handler = sata_dwc_error_handler,
|
|
.hardreset = sata_dwc_hardreset,
|
|
|
|
- .qc_prep = sata_dwc_qc_prep,
|
|
.qc_issue = sata_dwc_qc_issue,
|
|
|
|
.scr_read = sata_dwc_scr_read,
|
|
@@ -1166,6 +1185,8 @@ static struct ata_port_operations sata_d
|
|
.port_start = sata_dwc_port_start,
|
|
.port_stop = sata_dwc_port_stop,
|
|
|
|
+ .sff_dev_select = sata_dwc_dev_select,
|
|
+
|
|
.bmdma_setup = sata_dwc_bmdma_setup,
|
|
.bmdma_start = sata_dwc_bmdma_start,
|
|
};
|
|
@@ -1184,13 +1205,14 @@ static int sata_dwc_probe(struct platfor
|
|
struct sata_dwc_device *hsdev;
|
|
u32 idr, versionr;
|
|
char *ver = (char *)&versionr;
|
|
- u8 __iomem *base;
|
|
+ void __iomem *base;
|
|
int err = 0;
|
|
int irq;
|
|
struct ata_host *host;
|
|
struct ata_port_info pi = sata_dwc_port_info[0];
|
|
const struct ata_port_info *ppi[] = { &pi, NULL };
|
|
struct device_node *np = ofdev->dev.of_node;
|
|
+ struct resource *res;
|
|
|
|
/* Allocate DWC SATA device */
|
|
host = ata_host_alloc_pinfo(&ofdev->dev, ppi, SATA_DWC_MAX_PORTS);
|
|
@@ -1201,57 +1223,33 @@ static int sata_dwc_probe(struct platfor
|
|
host->private_data = hsdev;
|
|
|
|
/* Ioremap SATA registers */
|
|
- base = of_iomap(np, 0);
|
|
- if (!base) {
|
|
+ res = platform_get_resource(ofdev, IORESOURCE_MEM, 0);
|
|
+ base = devm_ioremap_resource(&ofdev->dev, res);
|
|
+ if (IS_ERR(base)) {
|
|
dev_err(&ofdev->dev,
|
|
"ioremap failed for SATA register address\n");
|
|
- return -ENODEV;
|
|
+ return PTR_ERR(base);
|
|
}
|
|
- hsdev->reg_base = base;
|
|
dev_dbg(&ofdev->dev, "ioremap done for SATA register address\n");
|
|
|
|
/* Synopsys DWC SATA specific Registers */
|
|
- hsdev->sata_dwc_regs = (void *__iomem)(base + SATA_DWC_REG_OFFSET);
|
|
+ hsdev->sata_dwc_regs = base + SATA_DWC_REG_OFFSET;
|
|
+ hsdev->dmadr = res->start + SATA_DWC_REG_OFFSET + offsetof(struct sata_dwc_regs, dmadr);
|
|
|
|
/* Setup port */
|
|
host->ports[0]->ioaddr.cmd_addr = base;
|
|
host->ports[0]->ioaddr.scr_addr = base + SATA_DWC_SCR_OFFSET;
|
|
- host_pvt.scr_addr_sstatus = base + SATA_DWC_SCR_OFFSET;
|
|
- sata_dwc_setup_port(&host->ports[0]->ioaddr, (unsigned long)base);
|
|
+ sata_dwc_setup_port(&host->ports[0]->ioaddr, base);
|
|
|
|
/* Read the ID and Version Registers */
|
|
- idr = in_le32(&hsdev->sata_dwc_regs->idr);
|
|
- versionr = in_le32(&hsdev->sata_dwc_regs->versionr);
|
|
+ idr = sata_dwc_readl(&hsdev->sata_dwc_regs->idr);
|
|
+ versionr = sata_dwc_readl(&hsdev->sata_dwc_regs->versionr);
|
|
dev_notice(&ofdev->dev, "id %d, controller version %c.%c%c\n",
|
|
idr, ver[0], ver[1], ver[2]);
|
|
|
|
- /* Get SATA DMA interrupt number */
|
|
- hsdev->dma->irq = irq_of_parse_and_map(np, 1);
|
|
- if (hsdev->dma->irq == NO_IRQ) {
|
|
- dev_err(&ofdev->dev, "no SATA DMA irq\n");
|
|
- err = -ENODEV;
|
|
- goto error_iomap;
|
|
- }
|
|
-
|
|
- /* Get physical SATA DMA register base address */
|
|
- hsdev->dma->regs = of_iomap(np, 1);
|
|
- if (!hsdev->dma->regs) {
|
|
- dev_err(&ofdev->dev,
|
|
- "ioremap failed for AHBDMA register address\n");
|
|
- err = -ENODEV;
|
|
- goto error_iomap;
|
|
- }
|
|
-
|
|
/* Save dev for later use in dev_xxx() routines */
|
|
hsdev->dev = &ofdev->dev;
|
|
|
|
- hsdev->dma->dev = &ofdev->dev;
|
|
-
|
|
- /* Initialize AHB DMAC */
|
|
- err = dw_dma_probe(hsdev->dma, NULL);
|
|
- if (err)
|
|
- goto error_dma_iomap;
|
|
-
|
|
/* Enable SATA Interrupts */
|
|
sata_dwc_enable_interrupts(hsdev);
|
|
|
|
@@ -1263,6 +1261,25 @@ static int sata_dwc_probe(struct platfor
|
|
goto error_out;
|
|
}
|
|
|
|
+#ifdef CONFIG_SATA_DWC_OLD_DMA
|
|
+ if (!of_find_property(np, "dmas", NULL)) {
|
|
+ err = sata_dwc_dma_init_old(ofdev, hsdev);
|
|
+ if (err)
|
|
+ goto error_out;
|
|
+ }
|
|
+#endif
|
|
+
|
|
+ hsdev->phy = devm_phy_optional_get(hsdev->dev, "sata-phy");
|
|
+ if (IS_ERR(hsdev->phy)) {
|
|
+ err = PTR_ERR(hsdev->phy);
|
|
+ hsdev->phy = NULL;
|
|
+ goto error_out;
|
|
+ }
|
|
+
|
|
+ err = phy_init(hsdev->phy);
|
|
+ if (err)
|
|
+ goto error_out;
|
|
+
|
|
/*
|
|
* Now, register with libATA core, this will also initiate the
|
|
* device discovery process, invoking our port_start() handler &
|
|
@@ -1276,12 +1293,7 @@ static int sata_dwc_probe(struct platfor
|
|
return 0;
|
|
|
|
error_out:
|
|
- /* Free SATA DMA resources */
|
|
- dw_dma_remove(hsdev->dma);
|
|
-error_dma_iomap:
|
|
- iounmap(hsdev->dma->regs);
|
|
-error_iomap:
|
|
- iounmap(base);
|
|
+ phy_exit(hsdev->phy);
|
|
return err;
|
|
}
|
|
|
|
@@ -1293,11 +1305,13 @@ static int sata_dwc_remove(struct platfo
|
|
|
|
ata_host_detach(host);
|
|
|
|
+ phy_exit(hsdev->phy);
|
|
+
|
|
+#ifdef CONFIG_SATA_DWC_OLD_DMA
|
|
/* Free SATA DMA resources */
|
|
- dw_dma_remove(hsdev->dma);
|
|
+ sata_dwc_dma_exit_old(hsdev);
|
|
+#endif
|
|
|
|
- iounmap(hsdev->dma->regs);
|
|
- iounmap(hsdev->reg_base);
|
|
dev_dbg(&ofdev->dev, "done\n");
|
|
return 0;
|
|
}
|