mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-26 17:01:14 +00:00
b75a9b04df
This does not add any new features, just some changes to the patches and a first try to use dt to set the irqs. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> SVN-Revision: 39466
380 lines
9.7 KiB
Diff
380 lines
9.7 KiB
Diff
bcm53xx: initial support for the BCM5301/BCM470X SoC
|
|
with ARM CPU
|
|
|
|
This patch adds support for the BCM5301/BCM470X SoCs with an ARM CPU.
|
|
Currently just booting to a shell is working and nothing else, no
|
|
Ethernet, wifi, flash, ...
|
|
|
|
Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
|
|
---
|
|
arch/arm/Kconfig | 2 +
|
|
arch/arm/Kconfig.debug | 5 ++
|
|
arch/arm/Makefile | 1 +
|
|
arch/arm/boot/dts/Makefile | 1 +
|
|
arch/arm/boot/dts/bcm5301-netgear-r6250.dts | 20 +++++++
|
|
arch/arm/boot/dts/bcm5301.dtsi | 83 +++++++++++++++++++++++++++
|
|
arch/arm/include/debug/bcm53xx.S | 19 ++++++
|
|
arch/arm/mach-bcm53xx/Kconfig | 15 +++++
|
|
arch/arm/mach-bcm53xx/Makefile | 1 +
|
|
arch/arm/mach-bcm53xx/bcm53xx.c | 69 ++++++++++++++++++++++
|
|
10 files changed, 216 insertions(+)
|
|
create mode 100644 arch/arm/boot/dts/bcm5301-netgear-r6250.dts
|
|
create mode 100644 arch/arm/boot/dts/bcm5301.dtsi
|
|
create mode 100644 arch/arm/include/debug/bcm53xx.S
|
|
create mode 100644 arch/arm/mach-bcm53xx/Kconfig
|
|
create mode 100644 arch/arm/mach-bcm53xx/Makefile
|
|
create mode 100644 arch/arm/mach-bcm53xx/bcm53xx.c
|
|
|
|
--- a/arch/arm/Kconfig
|
|
+++ b/arch/arm/Kconfig
|
|
@@ -922,6 +922,8 @@ source "arch/arm/mach-bcm/Kconfig"
|
|
|
|
source "arch/arm/mach-bcm2835/Kconfig"
|
|
|
|
+source "arch/arm/mach-bcm53xx/Kconfig"
|
|
+
|
|
source "arch/arm/mach-clps711x/Kconfig"
|
|
|
|
source "arch/arm/mach-cns3xxx/Kconfig"
|
|
--- a/arch/arm/Kconfig.debug
|
|
+++ b/arch/arm/Kconfig.debug
|
|
@@ -93,6 +93,10 @@ choice
|
|
bool "Kernel low-level debugging on BCM2835 PL011 UART"
|
|
depends on ARCH_BCM2835
|
|
|
|
+ config DEBUG_BCM_5301X
|
|
+ bool "Kernel low-level debugging on BCM53XX UART1"
|
|
+ depends on ARCH_BCM_5301X
|
|
+
|
|
config DEBUG_CLPS711X_UART1
|
|
bool "Kernel low-level debugging messages via UART1"
|
|
depends on ARCH_CLPS711X
|
|
@@ -620,6 +624,7 @@ endchoice
|
|
config DEBUG_LL_INCLUDE
|
|
string
|
|
default "debug/bcm2835.S" if DEBUG_BCM2835
|
|
+ default "debug/bcm53xx.S" if DEBUG_BCM_5301X
|
|
default "debug/cns3xxx.S" if DEBUG_CNS3XXX
|
|
default "debug/exynos.S" if DEBUG_EXYNOS_UART
|
|
default "debug/highbank.S" if DEBUG_HIGHBANK_UART
|
|
--- a/arch/arm/Makefile
|
|
+++ b/arch/arm/Makefile
|
|
@@ -145,6 +145,7 @@ textofs-$(CONFIG_ARCH_MSM8960) := 0x0020
|
|
machine-$(CONFIG_ARCH_AT91) += at91
|
|
machine-$(CONFIG_ARCH_BCM) += bcm
|
|
machine-$(CONFIG_ARCH_BCM2835) += bcm2835
|
|
+machine-$(CONFIG_ARCH_BCM_5301X) += bcm53xx
|
|
machine-$(CONFIG_ARCH_CLPS711X) += clps711x
|
|
machine-$(CONFIG_ARCH_CNS3XXX) += cns3xxx
|
|
machine-$(CONFIG_ARCH_DAVINCI) += davinci
|
|
--- a/arch/arm/boot/dts/Makefile
|
|
+++ b/arch/arm/boot/dts/Makefile
|
|
@@ -209,6 +209,7 @@ dtb-$(CONFIG_ARCH_VT8500) += vt8500-bv07
|
|
wm8650-mid.dtb \
|
|
wm8850-w70v2.dtb
|
|
dtb-$(CONFIG_ARCH_ZYNQ) += zynq-zc702.dtb
|
|
+dtb-$(CONFIG_ARCH_BCM_5301X) += bcm4708-netgear-r6250.dtb
|
|
|
|
targets += dtbs
|
|
targets += $(dtb-y)
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm4708-netgear-r6250.dts
|
|
@@ -0,0 +1,35 @@
|
|
+/*
|
|
+ * Broadcom BCM470X / BCM5301X arm platform code.
|
|
+ * DTS for Netgear R6250 V1
|
|
+ *
|
|
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+/dts-v1/;
|
|
+
|
|
+#include "bcm4708.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "netgear,r6250v1", "brcm,bcm4708";
|
|
+ model = "Netgear R6250 V1 (BCM4708)";
|
|
+
|
|
+ chosen {
|
|
+ bootargs = "console=ttyS0,115200";
|
|
+ };
|
|
+
|
|
+ memory {
|
|
+ reg = <0x00000000 0x08000000>;
|
|
+ };
|
|
+
|
|
+ chipcommonA {
|
|
+ uart0: serial@0300 {
|
|
+ status = "okay";
|
|
+ };
|
|
+
|
|
+ uart1: serial@0400 {
|
|
+ status = "okay";
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm4708.dtsi
|
|
@@ -0,0 +1,34 @@
|
|
+/*
|
|
+ * Broadcom BCM470X / BCM5301X ARM platform code.
|
|
+ * DTS for BCM4708 SoC.
|
|
+ *
|
|
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+#include "bcm5301x.dtsi"
|
|
+
|
|
+/ {
|
|
+ compatible = "brcm,bcm4708";
|
|
+
|
|
+ cpus {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ cpu@0 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "arm,cortex-a9";
|
|
+ next-level-cache = <&L2>;
|
|
+ reg = <0x0>;
|
|
+ };
|
|
+
|
|
+ cpu@1 {
|
|
+ device_type = "cpu";
|
|
+ compatible = "arm,cortex-a9";
|
|
+ next-level-cache = <&L2>;
|
|
+ reg = <0x1>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/boot/dts/bcm5301x.dtsi
|
|
@@ -0,0 +1,95 @@
|
|
+/*
|
|
+ * Broadcom BCM470X / BCM5301X ARM platform code.
|
|
+ * Generic DTS part for all BCM53010, BCM53011, BCM53012, BCM53014, BCM53015,
|
|
+ * BCM53016, BCM53017, BCM53018, BCM4707, BCM4708 and BCM4709 SoCs
|
|
+ *
|
|
+ * Copyright 2013-2014 Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+#include <dt-bindings/interrupt-controller/irq.h>
|
|
+#include <dt-bindings/interrupt-controller/arm-gic.h>
|
|
+#include "skeleton.dtsi"
|
|
+
|
|
+/ {
|
|
+ interrupt-parent = <&gic>;
|
|
+
|
|
+ chipcommonA {
|
|
+ compatible = "simple-bus";
|
|
+ ranges = <0x00000000 0x18000000 0x00001000>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ uart0: serial@0300 {
|
|
+ compatible = "ns16550";
|
|
+ reg = <0x0300 0x100>;
|
|
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clock-frequency = <100000000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+
|
|
+ uart1: serial@0400 {
|
|
+ compatible = "ns16550";
|
|
+ reg = <0x0400 0x100>;
|
|
+ interrupts = <GIC_SPI 85 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clock-frequency = <100000000>;
|
|
+ status = "disabled";
|
|
+ };
|
|
+ };
|
|
+
|
|
+ mpcore {
|
|
+ compatible = "simple-bus";
|
|
+ ranges = <0x00000000 0x19020000 0x00003000>;
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <1>;
|
|
+
|
|
+ scu@0000 {
|
|
+ compatible = "arm,cortex-a9-scu";
|
|
+ reg = <0x0000 0x100>;
|
|
+ };
|
|
+
|
|
+ timer@0200 {
|
|
+ compatible = "arm,cortex-a9-global-timer";
|
|
+ reg = <0x0200 0x100>;
|
|
+ interrupts = <GIC_PPI 11 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clocks = <&clk_periph>;
|
|
+ };
|
|
+
|
|
+ local-timer@0600 {
|
|
+ compatible = "arm,cortex-a9-twd-timer";
|
|
+ reg = <0x0600 0x100>;
|
|
+ interrupts = <GIC_PPI 13 IRQ_TYPE_LEVEL_HIGH>;
|
|
+ clocks = <&clk_periph>;
|
|
+ };
|
|
+
|
|
+ gic: interrupt-controller@1000 {
|
|
+ compatible = "arm,cortex-a9-gic";
|
|
+ #interrupt-cells = <3>;
|
|
+ #address-cells = <0>;
|
|
+ interrupt-controller;
|
|
+ reg = <0x1000 0x1000>,
|
|
+ <0x0100 0x100>;
|
|
+ };
|
|
+
|
|
+ L2: cache-controller@2000 {
|
|
+ compatible = "arm,pl310-cache";
|
|
+ reg = <0x2000 0x1000>;
|
|
+ cache-unified;
|
|
+ cache-level = <2>;
|
|
+ };
|
|
+ };
|
|
+
|
|
+ clocks {
|
|
+ #address-cells = <1>;
|
|
+ #size-cells = <0>;
|
|
+
|
|
+ /* As long as we do not have a real clock driver us this
|
|
+ * fixed clock */
|
|
+ clk_periph: periph {
|
|
+ compatible = "fixed-clock";
|
|
+ #clock-cells = <0>;
|
|
+ clock-frequency = <400000000>;
|
|
+ };
|
|
+ };
|
|
+};
|
|
--- /dev/null
|
|
+++ b/arch/arm/include/debug/bcm53xx.S
|
|
@@ -0,0 +1,19 @@
|
|
+/*
|
|
+ * Macros used for EARLY_PRINTK, in low-level UART debug console
|
|
+ *
|
|
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+
|
|
+#define BCM53XX_UART1_PHYS 0x18000300
|
|
+#define BCM53XX_UART1_VIRT 0xf1000300
|
|
+#define BCM53XX_UART1_SH 0
|
|
+
|
|
+ .macro addruart, rp, rv, tmp
|
|
+ ldr \rp, =BCM53XX_UART1_PHYS @ MMU off, Physical
|
|
+ ldr \rv, =BCM53XX_UART1_VIRT @ MMU on, Virtual
|
|
+ .endm
|
|
+
|
|
+#define UART_SHIFT BCM53XX_UART1_SH
|
|
+#include <asm/hardware/debug-8250.S>
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-bcm53xx/Kconfig
|
|
@@ -0,0 +1,25 @@
|
|
+config ARCH_BCM_5301X
|
|
+ bool "Broadcom BCM470X / BCM5301X ARM SoC" if ARCH_MULTI_V7
|
|
+ depends on MMU
|
|
+ select ARM_GIC
|
|
+ select CACHE_L2X0
|
|
+ select HAVE_ARM_SCU if SMP
|
|
+ select HAVE_ARM_TWD if SMP
|
|
+ select HAVE_SMP
|
|
+ select COMMON_CLK
|
|
+ select GENERIC_CLOCKEVENTS
|
|
+ select ARM_GLOBAL_TIMER
|
|
+ select CLKSRC_ARM_GLOBAL_TIMER_SCHED_CLOCK
|
|
+ select MIGHT_HAVE_PCI
|
|
+ help
|
|
+ Support for Broadcom BCM470X and BCM5301X SoCs with ARM CPU cores.
|
|
+
|
|
+ This is a network SoC line mostly used in home routers and
|
|
+ wifi access points.
|
|
+ This inclused the following SoC: BCM53010, BCM53011, BCM53012,
|
|
+ BCM53014, BCM53015, BCM53016, BCM53017, BCM53018, BCM4707,
|
|
+ BCM4708 and BCM4709.
|
|
+
|
|
+ Do not confuse this with the BCM4760 which is a totally
|
|
+ different SoC or with the older BCM47XX and BCM53XX based
|
|
+ network SoC using a MIPS CPU, they are supported by arch/mips/bcm47xx
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-bcm53xx/Makefile
|
|
@@ -0,0 +1 @@
|
|
+obj-y += bcm53xx.o
|
|
--- /dev/null
|
|
+++ b/arch/arm/mach-bcm53xx/bcm53xx.c
|
|
@@ -0,0 +1,70 @@
|
|
+/*
|
|
+ * Broadcom BCM470X / BCM5301X ARM platform code.
|
|
+ *
|
|
+ * Copyright 2013 Hauke Mehrtens <hauke@hauke-m.de>
|
|
+ *
|
|
+ * Licensed under the GNU/GPL. See COPYING for details.
|
|
+ */
|
|
+#include <linux/of_platform.h>
|
|
+#include <linux/clocksource.h>
|
|
+#include <linux/clk-provider.h>
|
|
+#include <asm/hardware/cache-l2x0.h>
|
|
+
|
|
+#include <asm/mach/arch.h>
|
|
+#include <asm/siginfo.h>
|
|
+#include <asm/signal.h>
|
|
+
|
|
+
|
|
+static bool first_fault = true;
|
|
+
|
|
+static int bcm5301x_abort_handler(unsigned long addr, unsigned int fsr,
|
|
+ struct pt_regs *regs)
|
|
+{
|
|
+ if (fsr == 0x1c06 && first_fault) {
|
|
+ first_fault = false;
|
|
+
|
|
+ /*
|
|
+ * These faults with code 0x1c06 happens for no good reason,
|
|
+ * possibly left over from the CFE boot loader.
|
|
+ */
|
|
+ pr_warn("External imprecise Data abort at addr=%#lx, fsr=%#x ignored.\n",
|
|
+ addr, fsr);
|
|
+
|
|
+ /* Returning non-zero causes fault display and panic */
|
|
+ return 0;
|
|
+ }
|
|
+
|
|
+ /* Others should cause a fault */
|
|
+ return 1;
|
|
+}
|
|
+
|
|
+static void __init bcm5301x_init_early(void)
|
|
+{
|
|
+ /* Install our hook */
|
|
+ hook_fault_code(16 + 6, bcm5301x_abort_handler, SIGBUS, BUS_OBJERR,
|
|
+ "imprecise external abort");
|
|
+}
|
|
+
|
|
+static void __init bcm5301x_timer_init(void)
|
|
+{
|
|
+ of_clk_init(NULL);
|
|
+ clocksource_of_init();
|
|
+}
|
|
+
|
|
+static void __init bcm5301x_dt_init(void)
|
|
+{
|
|
+ l2x0_of_init(0, ~0UL);
|
|
+ of_platform_populate(NULL, of_default_bus_match_table, NULL, NULL);
|
|
+}
|
|
+
|
|
+static const char __initconst *bcm5301x_dt_compat[] = {
|
|
+ "brcm,bcm4708",
|
|
+ NULL,
|
|
+};
|
|
+
|
|
+DT_MACHINE_START(BCM5301X, "BCM5301X")
|
|
+ .init_early = bcm5301x_init_early,
|
|
+ .init_time = bcm5301x_timer_init,
|
|
+ .init_machine = bcm5301x_dt_init,
|
|
+ .dt_compat = bcm5301x_dt_compat,
|
|
+MACHINE_END
|