mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 06:57:57 +00:00
34d2964554
Fixes issues with RTL8156 2.5G USB adapters
- # ethtool eth1
Settings for eth1:
Supported ports: [ ]
Supported link modes: Not reported
Supported pause frame use: No
Supports auto-negotiation: No
Supported FEC modes: Not reported
Advertised link modes: Not reported
Advertised pause frame use: No
Advertised auto-negotiation: No
Advertised FEC modes: Not reported
Speed: 2500Mb/s
Duplex: Half
Port: Twisted Pair
PHYAD: 0
Transceiver: internal
Auto-negotiation: off
MDI-X: Unknown
Current message level: 0x00000007 (7)
drv probe link
Link detected: yes
- #
- r8152: break the loop when the budget is exhausted
- r8152: Block future register access if register access fails
- r8152: Rename RTL8152_UNPLUG to RTL8152_INACCESSIBLE
- r8152: add vendor/device ID pair for D-Link DUB-E250
- r8152: try to use a normal budget
- r8152: set bp in bulk
- r8152: adjust generic_ocp_write function
- r8152: fix the autosuspend doesn't work
- r8152: Add __GFP_NOWARN to big allocations
- r8152: reduce the control transfer of rtl8152_get_version()
- r8152: remove rtl_vendor_mode function
- r8152: avoid to change cfg for all devices
- r8152: add USB device driver for config selection
- r8152: use napi_gro_frags
- cdc_ether: no need to blacklist any r8152 devices
- cdc_ether: add u-blox 0x1313 composition
Build system: x86_64
Build-tested: bcm2711, rockchip, x86/64
Run-tested: bcm2711/RPi4B, rockchip/nanopi r2s, x86/64
Signed-off-by: Marty Jones <mj8263788@gmail.com>
230 lines
8.2 KiB
Diff
230 lines
8.2 KiB
Diff
From ec51fbd1b8a2bca2948dede99c14ec63dc57ff6b Mon Sep 17 00:00:00 2001
|
|
From: Bjørn Mork <bjorn@mork.no>
|
|
Date: Fri, 6 Jan 2023 17:07:38 +0100
|
|
Subject: [PATCH] r8152: add USB device driver for config selection
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
Subclassing the generic USB device driver to override the
|
|
default configuration selection regardless of matching interface
|
|
drivers.
|
|
|
|
The r815x family devices expose a vendor specific function which
|
|
the r8152 interface driver wants to handle. This is the preferred
|
|
device mode. Additionally one or more USB class functions are
|
|
usually supported for hosts lacking a vendor specific driver. The
|
|
choice is USB configuration based, with one alternate function per
|
|
configuration.
|
|
|
|
Example device with both NCM and ECM alternate cfgs:
|
|
|
|
T: Bus=02 Lev=01 Prnt=01 Port=00 Cnt=01 Dev#= 4 Spd=5000 MxCh= 0
|
|
D: Ver= 3.20 Cls=00(>ifc ) Sub=00 Prot=00 MxPS= 9 #Cfgs= 3
|
|
P: Vendor=0bda ProdID=8156 Rev=31.00
|
|
S: Manufacturer=Realtek
|
|
S: Product=USB 10/100/1G/2.5G LAN
|
|
S: SerialNumber=001000001
|
|
C:* #Ifs= 1 Cfg#= 1 Atr=a0 MxPwr=256mA
|
|
I:* If#= 0 Alt= 0 #EPs= 3 Cls=ff(vend.) Sub=ff Prot=00 Driver=r8152
|
|
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
|
|
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
|
|
E: Ad=83(I) Atr=03(Int.) MxPS= 2 Ivl=128ms
|
|
C: #Ifs= 2 Cfg#= 2 Atr=a0 MxPwr=256mA
|
|
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=0d Prot=00 Driver=
|
|
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
|
|
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=01 Driver=
|
|
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=01 Driver=
|
|
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
|
|
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
|
|
C: #Ifs= 2 Cfg#= 3 Atr=a0 MxPwr=256mA
|
|
I: If#= 0 Alt= 0 #EPs= 1 Cls=02(comm.) Sub=06 Prot=00 Driver=
|
|
E: Ad=83(I) Atr=03(Int.) MxPS= 16 Ivl=128ms
|
|
I: If#= 1 Alt= 0 #EPs= 0 Cls=0a(data ) Sub=00 Prot=00 Driver=
|
|
I: If#= 1 Alt= 1 #EPs= 2 Cls=0a(data ) Sub=00 Prot=00 Driver=
|
|
E: Ad=81(I) Atr=02(Bulk) MxPS=1024 Ivl=0ms
|
|
E: Ad=02(O) Atr=02(Bulk) MxPS=1024 Ivl=0ms
|
|
|
|
A problem with this is that Linux will prefer class functions over
|
|
vendor specific functions. Using the above example, Linux defaults
|
|
to cfg #2, running the device in a sub-optimal NCM mode.
|
|
|
|
Previously we've attempted to work around the problem by
|
|
blacklisting the devices in the ECM class driver "cdc_ether", and
|
|
matching on the ECM class function in the vendor specific interface
|
|
driver. The latter has been used to switch back to the vendor
|
|
specific configuration when the driver is probed for a class
|
|
function.
|
|
|
|
This workaround has several issues;
|
|
- class driver blacklists is additional maintanence cruft in an
|
|
unrelated driver
|
|
- class driver blacklists prevents users from optionally running
|
|
the devices in class mode
|
|
- each device needs double match entries in the vendor driver
|
|
- the initial probing as a class function slows down device
|
|
discovery
|
|
|
|
Now these issues have become even worse with the introduction of
|
|
firmware supporting both NCM and ECM, where NCM ends up as the
|
|
default mode in Linux. To use the same workaround, we now have
|
|
to blacklist the devices in to two different class drivers and
|
|
add yet another match entry to the vendor specific driver.
|
|
|
|
This patch implements an alternative workaround strategy -
|
|
independent of the interface drivers. It avoids adding a
|
|
blacklist to the cdc_ncm driver and will let us remove the
|
|
existing blacklist from the cdc_ether driver.
|
|
|
|
As an additional bonus, removing the blacklists allow users to
|
|
select one of the other device modes if wanted.
|
|
|
|
Signed-off-by: Bjørn Mork <bjorn@mork.no>
|
|
Signed-off-by: David S. Miller <davem@davemloft.net>
|
|
---
|
|
drivers/net/usb/r8152.c | 113 ++++++++++++++++++++++++++++------------
|
|
1 file changed, 81 insertions(+), 32 deletions(-)
|
|
|
|
--- a/drivers/net/usb/r8152.c
|
|
+++ b/drivers/net/usb/r8152.c
|
|
@@ -9661,6 +9661,9 @@ static int rtl8152_probe(struct usb_inte
|
|
if (version == RTL_VER_UNKNOWN)
|
|
return -ENODEV;
|
|
|
|
+ if (intf->cur_altsetting->desc.bInterfaceClass != USB_CLASS_VENDOR_SPEC)
|
|
+ return -ENODEV;
|
|
+
|
|
if (!rtl_vendor_mode(intf))
|
|
return -ENODEV;
|
|
|
|
@@ -9861,43 +9864,35 @@ static void rtl8152_disconnect(struct us
|
|
}
|
|
}
|
|
|
|
-#define REALTEK_USB_DEVICE(vend, prod) { \
|
|
- USB_DEVICE_INTERFACE_CLASS(vend, prod, USB_CLASS_VENDOR_SPEC), \
|
|
-}, \
|
|
-{ \
|
|
- USB_DEVICE_AND_INTERFACE_INFO(vend, prod, USB_CLASS_COMM, \
|
|
- USB_CDC_SUBCLASS_ETHERNET, USB_CDC_PROTO_NONE), \
|
|
-}
|
|
|
|
/* table of devices that work with this driver */
|
|
static const struct usb_device_id rtl8152_table[] = {
|
|
/* Realtek */
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8050),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8053),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8152),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8153),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8155),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_REALTEK, 0x8156),
|
|
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x8050) },
|
|
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x8053) },
|
|
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x8152) },
|
|
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x8153) },
|
|
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x8155) },
|
|
+ { USB_DEVICE(VENDOR_ID_REALTEK, 0x8156) },
|
|
|
|
/* Microsoft */
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0c5e),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x304f),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3054),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3062),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3069),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x3082),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7205),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x720c),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x7214),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0x721e),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LENOVO, 0xa387),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_NVIDIA, 0x09ff),
|
|
- REALTEK_USB_DEVICE(VENDOR_ID_TPLINK, 0x0601),
|
|
+ { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07ab) },
|
|
+ { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x07c6) },
|
|
+ { USB_DEVICE(VENDOR_ID_MICROSOFT, 0x0927) },
|
|
+ { USB_DEVICE(VENDOR_ID_SAMSUNG, 0xa101) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x304f) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x3054) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x3062) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x3069) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x3082) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x7205) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x720c) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x7214) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0x721e) },
|
|
+ { USB_DEVICE(VENDOR_ID_LENOVO, 0xa387) },
|
|
+ { USB_DEVICE(VENDOR_ID_LINKSYS, 0x0041) },
|
|
+ { USB_DEVICE(VENDOR_ID_NVIDIA, 0x09ff) },
|
|
+ { USB_DEVICE(VENDOR_ID_TPLINK, 0x0601) },
|
|
{}
|
|
};
|
|
|
|
@@ -9917,7 +9912,61 @@ static struct usb_driver rtl8152_driver
|
|
.disable_hub_initiated_lpm = 1,
|
|
};
|
|
|
|
-module_usb_driver(rtl8152_driver);
|
|
+static int rtl8152_cfgselector_probe(struct usb_device *udev)
|
|
+{
|
|
+ struct usb_host_config *c;
|
|
+ int i, num_configs;
|
|
+
|
|
+ /* The vendor mode is not always config #1, so to find it out. */
|
|
+ c = udev->config;
|
|
+ num_configs = udev->descriptor.bNumConfigurations;
|
|
+ for (i = 0; i < num_configs; (i++, c++)) {
|
|
+ struct usb_interface_descriptor *desc = NULL;
|
|
+
|
|
+ if (!c->desc.bNumInterfaces)
|
|
+ continue;
|
|
+ desc = &c->intf_cache[0]->altsetting->desc;
|
|
+ if (desc->bInterfaceClass == USB_CLASS_VENDOR_SPEC)
|
|
+ break;
|
|
+ }
|
|
+
|
|
+ if (i == num_configs)
|
|
+ return -ENODEV;
|
|
+
|
|
+ if (usb_set_configuration(udev, c->desc.bConfigurationValue)) {
|
|
+ dev_err(&udev->dev, "Failed to set configuration %d\n",
|
|
+ c->desc.bConfigurationValue);
|
|
+ return -ENODEV;
|
|
+ }
|
|
+
|
|
+ return 0;
|
|
+}
|
|
+
|
|
+static struct usb_device_driver rtl8152_cfgselector_driver = {
|
|
+ .name = MODULENAME "-cfgselector",
|
|
+ .probe = rtl8152_cfgselector_probe,
|
|
+ .id_table = rtl8152_table,
|
|
+ .generic_subclass = 1,
|
|
+};
|
|
+
|
|
+static int __init rtl8152_driver_init(void)
|
|
+{
|
|
+ int ret;
|
|
+
|
|
+ ret = usb_register_device_driver(&rtl8152_cfgselector_driver, THIS_MODULE);
|
|
+ if (ret)
|
|
+ return ret;
|
|
+ return usb_register(&rtl8152_driver);
|
|
+}
|
|
+
|
|
+static void __exit rtl8152_driver_exit(void)
|
|
+{
|
|
+ usb_deregister(&rtl8152_driver);
|
|
+ usb_deregister_device_driver(&rtl8152_cfgselector_driver);
|
|
+}
|
|
+
|
|
+module_init(rtl8152_driver_init);
|
|
+module_exit(rtl8152_driver_exit);
|
|
|
|
MODULE_AUTHOR(DRIVER_AUTHOR);
|
|
MODULE_DESCRIPTION(DRIVER_DESC);
|