Daniel Golle 64dae1052b ramips: mt76x8: add support for Yuncore CPE200 ... Yuncore CPE200 is an outdoor unit with IEEE 802.11ac radio. Hardware: - SoC: MediaTek MT7628DAN (MIPS 580MHz) - Flash: 8 MiB Spansion S25FL064K - RAM: 64 MiB (built-into SoC) - WLAN: 5 GHz (MT7613AE) - Ethernet: 1x 10/100 Mbps WAN, 1x 10/100 LAN (MT7628) - Buttons: 1 Reset button, 2 buttons for display UI (unsupported) - LEDs: 4x Green (Power, LAN, WAN, WiFi) - Display: 4 digit 7-segment display driven by an additional microcontroller (unsupported) - Serial console: unpopulated header, 57600 8n1 (RX only) - Power: 12 VDC, 1 A Installation: The installation can be done via the recovery HTTP server which is built into the bootloader. Hold down the reset button while connecting the device to power and keep holding a bit more than 3 seconds. Connect to http://192.168.0.100/ and upload sysupgrade.bin file. Signed-off-by: Daniel Golle <daniel@makrotopia.org>		2024-09-02 13:27:47 +02:00
..
etc	ramips: mt76x8: add support for Yuncore CPE200	2024-09-02 13:27:47 +02:00
lib/upgrade	ramips: Add support for TP-Link Archer C50 v6 (CA/EU/RU)	2023-11-19 21:29:39 +01:00