mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-21 14:37:57 +00:00
5ca187570f
Based on http://patchwork.openwrt.org/patch/3162/ Signed-off-by: Embedded Wireless GmbH <info at embeddedwireless.de> Signed-off-by: Gabor Juhos <juhosg@openwrt.org> SVN-Revision: 35395
190 lines
5.7 KiB
C
190 lines
5.7 KiB
C
/*
|
|
* Atheros AP132 reference board support
|
|
*
|
|
* Copyright (c) 2012 Qualcomm Atheros
|
|
* Copyright (c) 2012 Gabor Juhos <juhosg@openwrt.org>
|
|
* Copyright (c) 2013 Embedded Wireless GmbH <info@embeddedwireless.de>
|
|
*
|
|
* Permission to use, copy, modify, and/or distribute this software for any
|
|
* purpose with or without fee is hereby granted, provided that the above
|
|
* copyright notice and this permission notice appear in all copies.
|
|
*
|
|
* THE SOFTWARE IS PROVIDED "AS IS" AND THE AUTHOR DISCLAIMS ALL WARRANTIES
|
|
* WITH REGARD TO THIS SOFTWARE INCLUDING ALL IMPLIED WARRANTIES OF
|
|
* MERCHANTABILITY AND FITNESS. IN NO EVENT SHALL THE AUTHOR BE LIABLE FOR
|
|
* ANY SPECIAL, DIRECT, INDIRECT, OR CONSEQUENTIAL DAMAGES OR ANY DAMAGES
|
|
* WHATSOEVER RESULTING FROM LOSS OF USE, DATA OR PROFITS, WHETHER IN AN
|
|
* ACTION OF CONTRACT, NEGLIGENCE OR OTHER TORTIOUS ACTION, ARISING OUT OF
|
|
* OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THIS SOFTWARE.
|
|
*
|
|
*/
|
|
|
|
#include <linux/platform_device.h>
|
|
#include <linux/ar8216_platform.h>
|
|
|
|
#include <asm/mach-ath79/ar71xx_regs.h>
|
|
|
|
#include "common.h"
|
|
#include "dev-ap9x-pci.h"
|
|
#include "dev-gpio-buttons.h"
|
|
#include "dev-eth.h"
|
|
#include "dev-leds-gpio.h"
|
|
#include "dev-m25p80.h"
|
|
#include "dev-usb.h"
|
|
#include "dev-wmac.h"
|
|
#include "machtypes.h"
|
|
|
|
#define AP132_GPIO_LED_USB 4
|
|
#define AP132_GPIO_LED_WLAN_5G 12
|
|
#define AP132_GPIO_LED_WLAN_2G 13
|
|
#define AP132_GPIO_LED_STATUS_RED 14
|
|
#define AP132_GPIO_LED_WPS_RED 15
|
|
|
|
#define AP132_GPIO_BTN_WPS 16
|
|
|
|
#define AP132_KEYS_POLL_INTERVAL 20 /* msecs */
|
|
#define AP132_KEYS_DEBOUNCE_INTERVAL (3 * AP132_KEYS_POLL_INTERVAL)
|
|
|
|
#define AP132_MAC0_OFFSET 0
|
|
#define AP132_WMAC_CALDATA_OFFSET 0x1000
|
|
|
|
static struct gpio_led ap132_leds_gpio[] __initdata = {
|
|
{
|
|
.name = "ap132:red:status",
|
|
.gpio = AP132_GPIO_LED_STATUS_RED,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "ap132:red:wps",
|
|
.gpio = AP132_GPIO_LED_WPS_RED,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "ap132:red:wlan-2g",
|
|
.gpio = AP132_GPIO_LED_WLAN_2G,
|
|
.active_low = 1,
|
|
},
|
|
{
|
|
.name = "ap132:red:usb",
|
|
.gpio = AP132_GPIO_LED_USB,
|
|
.active_low = 1,
|
|
}
|
|
};
|
|
|
|
static struct gpio_keys_button ap132_gpio_keys[] __initdata = {
|
|
{
|
|
.desc = "WPS button",
|
|
.type = EV_KEY,
|
|
.code = KEY_WPS_BUTTON,
|
|
.debounce_interval = AP132_KEYS_DEBOUNCE_INTERVAL,
|
|
.gpio = AP132_GPIO_BTN_WPS,
|
|
.active_low = 1,
|
|
},
|
|
};
|
|
|
|
static struct ar8327_pad_cfg ap132_ar8327_pad0_cfg;
|
|
|
|
static struct ar8327_platform_data ap132_ar8327_data = {
|
|
.pad0_cfg = &ap132_ar8327_pad0_cfg,
|
|
.port0_cfg = {
|
|
.force_link = 1,
|
|
.speed = AR8327_PORT_SPEED_1000,
|
|
.duplex = 1,
|
|
.txpause = 1,
|
|
.rxpause = 1,
|
|
},
|
|
};
|
|
|
|
static struct mdio_board_info ap132_mdio1_info[] = {
|
|
{
|
|
.bus_id = "ag71xx-mdio.1",
|
|
.phy_addr = 0,
|
|
.platform_data = &ap132_ar8327_data,
|
|
},
|
|
};
|
|
|
|
static void __init ap132_mdio_setup(void)
|
|
{
|
|
void __iomem *base;
|
|
u32 t;
|
|
|
|
#define GPIO_IN_ENABLE3_ADDRESS 0x0050
|
|
#define GPIO_IN_ENABLE3_MII_GE1_MDI_MASK 0x00ff0000
|
|
#define GPIO_IN_ENABLE3_MII_GE1_MDI_LSB 16
|
|
#define GPIO_IN_ENABLE3_MII_GE1_MDI_SET(x) (((x) << GPIO_IN_ENABLE3_MII_GE1_MDI_LSB) & GPIO_IN_ENABLE3_MII_GE1_MDI_MASK)
|
|
#define GPIO_OUT_FUNCTION4_ADDRESS 0x003c
|
|
#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK 0xff000000
|
|
#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB 24
|
|
#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK)
|
|
#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK 0x0000ff00
|
|
#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB 8
|
|
#define GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(x) (((x) << GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_LSB) & GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK)
|
|
|
|
base = ioremap(AR71XX_GPIO_BASE, AR71XX_GPIO_SIZE);
|
|
|
|
t = __raw_readl(base + GPIO_IN_ENABLE3_ADDRESS);
|
|
t &= ~GPIO_IN_ENABLE3_MII_GE1_MDI_MASK;
|
|
t |= GPIO_IN_ENABLE3_MII_GE1_MDI_SET(19);
|
|
__raw_writel(t, base + GPIO_IN_ENABLE3_ADDRESS);
|
|
|
|
|
|
__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 19), base + AR71XX_GPIO_REG_OE);
|
|
|
|
__raw_writel(__raw_readl(base + AR71XX_GPIO_REG_OE) & ~(1 << 17), base + AR71XX_GPIO_REG_OE);
|
|
|
|
|
|
t = __raw_readl(base + GPIO_OUT_FUNCTION4_ADDRESS);
|
|
t &= ~(GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_MASK | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_MASK);
|
|
t |= GPIO_OUT_FUNCTION4_ENABLE_GPIO_19_SET(0x20) | GPIO_OUT_FUNCTION4_ENABLE_GPIO_17_SET(0x21);
|
|
__raw_writel(t, base + GPIO_OUT_FUNCTION4_ADDRESS);
|
|
|
|
iounmap(base);
|
|
|
|
}
|
|
|
|
static void __init ap132_setup(void)
|
|
{
|
|
u8 *art = (u8 *) KSEG1ADDR(0x1fff0000);
|
|
|
|
ath79_register_m25p80(NULL);
|
|
|
|
ath79_register_leds_gpio(-1, ARRAY_SIZE(ap132_leds_gpio),
|
|
ap132_leds_gpio);
|
|
ath79_register_gpio_keys_polled(-1, AP132_KEYS_POLL_INTERVAL,
|
|
ARRAY_SIZE(ap132_gpio_keys),
|
|
ap132_gpio_keys);
|
|
|
|
ath79_register_usb();
|
|
|
|
ath79_register_wmac(art + AP132_WMAC_CALDATA_OFFSET, NULL);
|
|
|
|
/* GMAC0 of the AR8327 switch is connected to GMAC1 via SGMII */
|
|
ap132_ar8327_pad0_cfg.mode = AR8327_PAD_MAC_SGMII;
|
|
ap132_ar8327_pad0_cfg.sgmii_delay_en = true;
|
|
|
|
ath79_eth1_pll_data.pll_1000 = 0x03000101;
|
|
|
|
ap132_mdio_setup();
|
|
|
|
ath79_register_mdio(1, 0x0);
|
|
|
|
ath79_init_mac(ath79_eth1_data.mac_addr, art + AP132_MAC0_OFFSET, 0);
|
|
|
|
mdiobus_register_board_info(ap132_mdio1_info,
|
|
ARRAY_SIZE(ap132_mdio1_info));
|
|
|
|
/* GMAC1 is connected to the SGMII interface */
|
|
ath79_eth1_data.phy_if_mode = PHY_INTERFACE_MODE_SGMII;
|
|
ath79_eth1_data.speed = SPEED_1000;
|
|
ath79_eth1_data.duplex = DUPLEX_FULL;
|
|
ath79_eth1_data.phy_mask = BIT(0);
|
|
ath79_eth1_data.mii_bus_dev = &ath79_mdio1_device.dev;
|
|
|
|
ath79_register_eth(1);
|
|
}
|
|
|
|
MIPS_MACHINE(ATH79_MACH_AP132, "AP132",
|
|
"Atheros AP132 reference board",
|
|
ap132_setup);
|
|
|