mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-30 10:39:04 +00:00
098f7156cc
This patch adds support for the Airtight C-60. SOC: Atheros AR9344 rev 2 (CPU:560.000MHz) RAM: 128 MiB NOR: MX25L3205D 4MiB NAND: ST Micro NAND 32MiB 3,3V 8-bit SW-NET: AR8327N (2 Ports) WLAN1: Dual-Band AR9340 Rev:2 (built-in SoC) WLAN2: Dual-Band AR9300 Rev:4 PCIe Chip The switch is setup for an accesspoint: LAN1: (gigabit) is the wan-port. LAN2: (fast ethernet) is bridged with the br-lan. Flashing Guide (via initramfs): 1. Connect a PC to the serial port of the C-60. power up the C-60. Enter u-boot command prompt: #> nand erase #> setenv bootcmd "bootm 0x9f060000" #> saveenv #> setenv ipaddr 192.168.1.1 #> setenv netmask 255.255.255.0 #> setenv serverip 192.168.1.100 #> setenv bootfile lede-ar71xx-nand-c-60-initramfs-kernel.bin #> tftpboot #> bootm 2. Wait for the C-60 to boot LEDE. On the root prompt. Enter: # ubiformat /dev/mtd4 # ubiattach -p /dev/mtd4 3. After that copy the sysupgrade.tar onto the router and run: # sysupgrade sysupgrade.tar to flash the image. Special thanks to Chris Blake <chrisrblake93@gmail.com>. He provided a C-60 unit and he helped with debugging the switch, LEDs and platfrom support. Signed-off-by: Christian Lamparter <chunkeey@gmail.com>
1668 lines
40 KiB
Plaintext
1668 lines
40 KiB
Plaintext
config ATH79_MACH_ALFA_AP120C
|
|
bool "ALFA Network AP120C board support"
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_AP96
|
|
bool "ALFA Network AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_HORNET_UB
|
|
bool "ALFA Network Hornet-UB board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALFA_NX
|
|
bool "ALFA Network N2/N5 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TUBE2H
|
|
bool "ALFA Network Tube2H board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ALL0258N
|
|
bool "Allnet ALL0258N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ALL0315N
|
|
bool "Allnet ALL0315N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_ANTMINER_S1
|
|
bool "Bitmain Antminer S1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTMINER_S3
|
|
bool "Bitmain Antminer S3 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ANTROUTER_R1
|
|
bool "Bitmain Antrouter R1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARDUINO_YUN
|
|
bool "Arduino Yun"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Arduino Yun.
|
|
|
|
config ATH79_MACH_AP113
|
|
bool "Atheros AP113 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_PB9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_ETH
|
|
|
|
config ATH79_MACH_AP132
|
|
bool "Atheros AP132 reference board"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Atheros AP132 reference boards.
|
|
|
|
config ATH79_MACH_AP143
|
|
bool "Atheros AP143 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Atheros AP143 reference board.
|
|
|
|
config ATH79_MACH_AP147
|
|
bool "Atheros AP147 reference board"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
QCA AP147 reference boards.
|
|
|
|
config ATH79_MACH_AP152
|
|
bool "Atheros AP152 reference board"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
QCA AP152 reference boards.
|
|
|
|
|
|
config ATH79_MACH_AP83
|
|
bool "Atheros AP83 board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_AP96
|
|
bool "Atheros AP96 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_PB42
|
|
bool "Atheros PB42 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_PB92
|
|
bool "Atheros PB92 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_PB9X_PCI if PCI
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_C55
|
|
bool "AirTight Networks C-55 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_C60
|
|
bool "AirTight Networks C-60 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_AW_NR580
|
|
bool "AzureWave AW-NR580 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_F9K1115V2
|
|
bool "Belkin AC1750DB board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EPG5000
|
|
bool "EnGenius EPG5000 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_ESR1750
|
|
bool "EnGenius ESR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_SOM9331
|
|
bool "SOM9331 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WHR_HP_G300N
|
|
bool "Buffalo WHR-HP-G300N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLAE_AG300N
|
|
bool "Buffalo WLAE-AG300N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WLR8100
|
|
bool "Sitecom WLR-8100 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WZR_HP_AG300H
|
|
bool "Buffalo WZR-HP-AG300H board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH
|
|
bool "Buffalo WZR-HP-G300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select RTL8366_SMI
|
|
|
|
config ATH79_MACH_WZR_HP_G300NH2
|
|
bool "Buffalo WZR-HP-G300NH2 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_HP_G450H
|
|
bool "Buffalo WZR-HP-G450H board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WZR_450HP2
|
|
bool "Buffalo WZR-450HP2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WP543
|
|
bool "Compex WP543/WPJ543 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPE72
|
|
bool "Compex WPE72/WPE72NX board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select MYLOADER
|
|
|
|
config ATH79_MACH_WPJ342
|
|
bool "Compex WPJ342 board support"
|
|
select SOC_AS934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ344
|
|
bool "Compex WPJ344 board support"
|
|
select SOC_AS934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ531
|
|
bool "Compex WPJ531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WPJ558
|
|
bool "Compex WPJ558 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DGL_5500_A1
|
|
bool "D-Link DGL-5500 A1 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DHP_1565_A1
|
|
bool "D-Link DHP-1565 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_505_A1
|
|
bool "D-Link DIR-505-A1 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_600_A1
|
|
bool "D-Link DIR-600 A1/DIR-615 E1/DIR-615 E4 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_C1
|
|
bool "D-Link DIR-615 rev. C1 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_615_I1
|
|
bool "D-Link DIR-615 rev. I1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_DIR_825_B1
|
|
bool "D-Link DIR-825 rev. B1 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DIR_825_C1
|
|
bool "D-Link DIR-825 rev. C1/DIR-835 rev. A1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DIR_869_A1
|
|
bool "D-Link DIR-869 rev. A1"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DLAN_HOTSPOT
|
|
bool "devolo dLAN Hotspot support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DLAN_PRO_500_WP
|
|
bool "devolo dLAN pro 500 Wireless+ support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DLAN_PRO_1200_AC
|
|
bool "devolo dLAN pro 1200+ WiFi ac support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_DR344
|
|
bool "Wallys DR344 board support"
|
|
select SOC_AS934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DR531
|
|
bool "Wallys DR531 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_DRAGINO2
|
|
bool "DRAGINO V2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_ESR900
|
|
bool "EnGenius ESR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EW_DORIN
|
|
bool "embedded wireless Dorin Platform support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_ETH
|
|
help
|
|
Say 'Y' here if you want your kernel to support the
|
|
Dorin Platform from www.80211.de .
|
|
|
|
config ATH79_MACH_EL_M150
|
|
bool "EasyLink EL-M150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EL_MINI
|
|
bool "EasyLink EL-MINI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR150
|
|
bool "GL AR150 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300
|
|
bool "GL_AR300 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_AR300M
|
|
bool "GL_AR300M support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_DOMINO
|
|
bool "DOMINO support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_MIFI
|
|
bool "GL MIFI support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GL_INET
|
|
bool "GL-INET support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP300V2
|
|
bool "EnGenius EAP300 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_MINIBOX_V1
|
|
bool "Gainstrong MiniBox V1.0 support"
|
|
select SOC_AR933X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_GS_OOLITE
|
|
bool "GS Oolite V1 support"
|
|
select SOC_AR933X
|
|
select ARH79_DEV_ETH
|
|
select ARH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_HIWIFI_HC6361
|
|
bool "HiWiFi HC6361 board support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_JA76PF
|
|
bool "jjPlus JA76PF board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP003
|
|
bool "jjPlus JWAP003 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_JWAP230
|
|
bool "jjPlus JWAP230 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WRT160NL
|
|
bool "Linksys WRT160NL board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_WRT400N
|
|
bool "Linksys WRT400N board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WRTNODE2Q
|
|
bool "WRTnode2Q board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_R6100
|
|
bool "NETGEAR R6100 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MC_MAC1200R
|
|
bool "MERCURY MAC1200R board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RB4XX
|
|
bool "MikroTik RouterBOARD 4xx series support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_RB750
|
|
bool "MikroTik RouterBOARD 750 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB91X
|
|
bool "MikroTik RouterBOARD 91X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_SPI
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB922
|
|
bool "MikroTik RouterBOARD 922 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
select RLE_DECOMPRESS
|
|
|
|
config ATH79_MACH_RB95X
|
|
bool "MikroTik RouterBOARD 95X support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RB2011
|
|
bool "MikroTik RouterBOARD 2011 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_RBSXTLITE
|
|
bool "MikroTik RouterBOARD SXT Lite"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_ROUTERBOOT
|
|
|
|
config ATH79_MACH_SMART_300
|
|
bool "NC-LINK SMART-300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TELLSTICK_ZNET_LITE
|
|
bool "TellStick ZNet Lite"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNDAP360
|
|
bool "NETGEAR WNDAP360 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNDR3700
|
|
bool "NETGEAR WNDR3700 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNDR4300
|
|
bool "NETGEAR WNDR3700v4/WNDR4300 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000
|
|
bool "NETGEAR WNR2000 board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_WNR2000_V3
|
|
bool "NETGEAR WNR2000 V3/WNR612 v2/WNR1000 v2/WPN824N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_WNR2200
|
|
bool "NETGEAR WNR2200 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WNR2000_V4
|
|
bool "NETGEAR WNR2000 V4"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM2P
|
|
bool "OpenMesh OM2P board support"
|
|
select SOC_AR724X
|
|
select SOC_AR933X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P
|
|
bool "OpenMesh OM5P board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_AC
|
|
bool "OpenMesh OM5P-AC board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OM5P_ACv2
|
|
bool "OpenMesh OM5P-ACv2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_G1
|
|
bool "OMYlink OMY G1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_OMY_X1
|
|
bool "OMYlink OMY X1 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ONION_OMEGA
|
|
bool "ONION OMEGA support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR12
|
|
bool "Meraki MR12 board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR16
|
|
bool "Meraki MR16 board support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR18
|
|
bool "Meraki MR18 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_MR600
|
|
bool "OpenMesh MR600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W04NU
|
|
bool "Planex MZK-W04NU board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MZK_W300NH
|
|
bool "Planex MZK-W300NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_RW2458N
|
|
bool "Redwave RW2458N board support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_CAP324
|
|
bool "PowerCloud CAP324 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CAP4200AG
|
|
bool "Senao CAP4200AG support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR3000
|
|
bool "PowerCloud CR3000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CR5000
|
|
bool "PowerCloud CR5000 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR1750
|
|
bool "OpenMesh MR1750 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MR900
|
|
bool "OpenMesh MR900 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_EAP7660D
|
|
bool "Senao EAP7660D support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_BSB
|
|
bool "Smart Electronics Black Swift board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ARCHER_C7
|
|
bool "TP-LINK Archer C5/C7/TL-WDR4900 v2 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CPE510
|
|
bool "TP-LINK CPE510 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR11U
|
|
bool "TP-LINK TL-MR11U/TL-MR3040 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR13U
|
|
bool "TP-LINK TL-MR13U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3020
|
|
bool "TP-LINK TL-MR3020 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_MR3X20
|
|
bool "TP-LINK TL-MR3220/3420 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TL_WAX50RE
|
|
bool "TP-LINK TL-WA750/850RE support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA701ND_V2
|
|
bool "TP-LINK TL-WA701ND v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA7210N_V2
|
|
bool "TP-LINK TL-WA7210N v2 support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
config ATH79_MACH_TL_WA801ND_V3
|
|
bool "TP-LINK TL-WA801ND v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
config ATH79_MACH_TL_WA830RE_V2
|
|
bool "TP-LINK TL-WA830RE v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND
|
|
bool "TP-LINK TL-WA901ND/TL-WA7510N support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WA901ND_V2
|
|
bool "TP-LINK TL-WA901ND v2 support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WA901ND_V4
|
|
bool "TP-LINK TL-WA901ND v4 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3320_V2
|
|
bool "TP-LINK TL-WDR3320 v2 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR3500
|
|
bool "TP-LINK TL-WDR3500 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR4300
|
|
bool "TP-LINK TL-WDR3600/4300/4310 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WDR6500_V2
|
|
bool "TP-LINK TL-WDR6500 v2 board support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR703N
|
|
bool "TP-LINK TL-WR703N/TL-WR710N/TL-MR10U support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR720N_V3
|
|
bool "TP-LINK TL-WR720N v3/v4 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR741ND
|
|
bool "TP-LINK TL-WR741ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR741ND_V4
|
|
bool "TP-LINK TL-WR741ND v4/TL-MR3220 v2 support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR810N
|
|
bool "TP-LINK TL-WR810N support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V1
|
|
bool "TP-LINK TL-WR841N v1 support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_TL_WR841N_V8
|
|
bool "TP-LINK TL-WR841N/ND v8/TL-MR3420 v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR841N_V9
|
|
bool "TP-LINK TL-WR841N/ND v9/TL-WR842N/ND v3 support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND
|
|
bool "TP-LINK TL-WR941ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_DSA
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR941ND_V6
|
|
bool "TP-LINK TL-WR941ND v6 support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1041N_V2
|
|
bool "TP-LINK TL-WR1041N v2 support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND
|
|
bool "TP-LINK TL-WR1043ND support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR1043ND_V2
|
|
bool "TP-LINK TL-WR1043ND v2 support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TL_WR2543N
|
|
bool "TP-LINK TL-WR2543N/ND support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_TEW_632BRP
|
|
bool "TRENDnet TEW-632BRP support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_673GRU
|
|
bool "TRENDnet TEW-673GRU support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_712BR
|
|
bool "TRENDnet TEW-712BR support"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_TEW_732BR
|
|
bool "TRENDnet TEW-732BR support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_TEW_823DRU
|
|
bool "TRENDnet TEW-823DRU support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_UBNT
|
|
bool "Ubiquiti AR71xx based boards support"
|
|
select SOC_AR71XX
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_UBNT_UNIFIAC
|
|
bool "Ubiquiti UniFi AC (LITE/LR/PRO) support"
|
|
select SOC_QCA956X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
|
|
config ATH79_MACH_WEIO
|
|
bool "WeIO board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_MYNET_N600
|
|
bool "WD My Net N600 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_N750
|
|
bool "WD My Net N750 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_MYNET_REXT
|
|
bool "WD My Net Wi-Fi Range Extender board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_NVRAM
|
|
|
|
config ATH79_MACH_Z1
|
|
bool "Meraki Z1 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
select LEDS_NU801
|
|
|
|
config ATH79_MACH_ZBT_WE1526
|
|
bool "Zbtlink ZBT-WE1526 board support"
|
|
select SOC_QCA953X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_ZCN_1523H
|
|
bool "Zcomax ZCN-1523H support"
|
|
select SOC_AR724X
|
|
select ATH79_DEV_AP9X_PCI if PCI
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
|
|
config ATH79_MACH_NBG460N
|
|
bool "Zyxel NBG460N/550N/550NH board support"
|
|
select SOC_AR913X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_NBG6716
|
|
bool "Zyxel NBG6616/NBG6716 board support"
|
|
select SOC_QCA955X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_NFC
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CARAMBOLA2
|
|
bool "8devices Carambola2 board"
|
|
select SOC_AR933X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_CF_E316N_V2
|
|
bool "COMFAST CF-E316N v2 board"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_BHU_BXU2000N2_A
|
|
bool "BHU BXU2000n-2 rev. A support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_USB
|
|
select ATH79_DEV_WMAC
|
|
|
|
config ATH79_MACH_QIHOO_C301
|
|
bool "Qihoo 360 C301 board support"
|
|
select SOC_AR934X
|
|
select ATH79_DEV_ETH
|
|
select ATH79_DEV_GPIO_BUTTONS
|
|
select ATH79_DEV_LEDS_GPIO
|
|
select ATH79_DEV_M25P80
|
|
select ATH79_DEV_WMAC
|
|
select ATH79_DEV_USB
|
|
select ATH79_NVRAM
|