openwrt/target/linux/bcm27xx/patches-5.10/950-0721-drm-vc4-Increase-the-core-clock-to-a-minimum-of-500M.patch
Álvaro Fernández Rojas 8299d1f057 bcm27xx: add kernel 5.10 support
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:07 +02:00

41 lines
1.4 KiB
Diff

From f79e871c8d9fbe90b351f61b052878d98b999b1b Mon Sep 17 00:00:00 2001
From: Dom Cobley <popcornmix@gmail.com>
Date: Mon, 26 Jul 2021 18:07:25 +0100
Subject: [PATCH] drm/vc4: Increase the core clock to a minimum of 500MHz
The core clock needs to be raised temporarily during a modeset to
500MHz. However, the HVS core clock requirement might be higher than
500MHz. This rate will be enforced at the end of the mode setting,
meaning that might might end up with a core clock rate lower than
planned on the first mode set.
Use the maximum value of 500MHz and the HVS core clock rate for our
temporary boost to fix this issue.
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
drivers/gpu/drm/vc4/vc4_kms.c | 8 +++++++-
1 file changed, 7 insertions(+), 1 deletion(-)
--- a/drivers/gpu/drm/vc4/vc4_kms.c
+++ b/drivers/gpu/drm/vc4/vc4_kms.c
@@ -348,11 +348,17 @@ vc4_atomic_complete_commit(struct drm_at
}
if (vc4->hvs && vc4->hvs->hvs5) {
+ unsigned long core_rate = max_t(unsigned long,
+ 500000000,
+ hvs_state->core_clock_rate);
+
+ drm_dbg(dev, "Raising the core clock at %lu Hz\n", core_rate);
+
/*
* Do a temporary request on the core clock during the
* modeset.
*/
- core_req = clk_request_start(hvs->core_clk, 500000000);
+ core_req = clk_request_start(hvs->core_clk, core_rate);
/*
* And remove the previous one based on the HVS