openwrt/target/linux/bcm27xx/patches-5.10/950-0638-ARM-dts-bcm2711-Tune-DMA-parameters-for-HDMI-audio.patch
Álvaro Fernández Rojas 8299d1f057 bcm27xx: add kernel 5.10 support
Rebased RPi foundation patches on linux 5.10.59, removed applied and reverted
patches, wireless patches and defconfig patches.

bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 4B v1.1 4G
bcm2711: boot tested on RPi 4B v1.1 4G

Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
2021-08-21 19:07:07 +02:00

36 lines
1.2 KiB
Diff

From 54643c62b6a848bfcfd86ac4eebbea28c0f1902e Mon Sep 17 00:00:00 2001
From: Dom Cobley <popcornmix@gmail.com>
Date: Wed, 28 Apr 2021 16:10:02 +0200
Subject: [PATCH] ARM: dts: bcm2711: Tune DMA parameters for HDMI audio
Enable NO_WAIT_RESP, DMA_WIDE_SOURCE, DMA_WIDE_DEST, and bump the DMA
panic and AXI priorities to avoid any DMA transfer error with HBR audio
(8 channel, 192Hz).
Signed-off-by: Dom Cobley <popcornmix@gmail.com>
Signed-off-by: Maxime Ripard <maxime@cerno.tech>
---
arch/arm/boot/dts/bcm2711.dtsi | 4 ++--
1 file changed, 2 insertions(+), 2 deletions(-)
--- a/arch/arm/boot/dts/bcm2711.dtsi
+++ b/arch/arm/boot/dts/bcm2711.dtsi
@@ -359,7 +359,7 @@
interrupt-names = "cec-tx", "cec-rx", "cec-low",
"wakeup", "hpd-connected", "hpd-removed";
ddc = <&ddc0>;
- dmas = <&dma 10>;
+ dmas = <&dma (10 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
dma-names = "audio-rx";
status = "disabled";
};
@@ -406,7 +406,7 @@
<9>, <10>, <11>;
interrupt-names = "cec-tx", "cec-rx", "cec-low",
"wakeup", "hpd-connected", "hpd-removed";
- dmas = <&dma 17>;
+ dmas = <&dma (17 | (1 << 27) | (1 << 24)| (15 << 20) | (10 << 16))>;
dma-names = "audio-rx";
status = "disabled";
};