openwrt/target/linux/ipq40xx/patches-4.14/303-spi-nor-enable-4B-opcodes-for-mx25l25635f.patch
Kuan-Yi Li f1525e785e kernel: backport GD25Q256 support from 4.15
Backport below changes for GigaDevice GD25Q256 support from v4.15:

  e27072851bf7 mtd: spi-nor: add a quad_enable callback in struct flash_info
  65153846b18c mtd: spi-nor: add support for GD25Q256

This chip is used on newer Quad-E4G boards.

Before:

[    2.366493] m25p80 spi0.0: unrecognized JEDEC id bytes: c8, 40, 19
[    2.372853] m25p80: probe of spi0.0 failed with error -2

After:

[    2.371722] m25p80 spi0.0: gd25q256 (32768 Kbytes)
[    2.376694] 5 fixed-partitions partitions found on MTD device spi0.0
[    2.383043] Creating 5 MTD partitions on "spi0.0":
[    2.387824] 0x000000000000-0x000000030000 : "u-boot"
[    2.394138] 0x000000030000-0x000000031000 : "u-boot-env"
[    2.400608] 0x000000031000-0x000000040000 : "config"
[    2.406830] 0x000000040000-0x000000050000 : "factory"
[    2.413169] 0x000000050000-0x000002000000 : "firmware"

Signed-off-by: Kuan-Yi Li <kyli@abysm.org>
2020-12-01 21:59:30 +01:00

63 lines
2.3 KiB
Diff

--- a/drivers/mtd/spi-nor/spi-nor.c
+++ b/drivers/mtd/spi-nor/spi-nor.c
@@ -1047,6 +1047,7 @@ static const struct flash_info spi_nor_i
{ "mx25l12805d", INFO(0xc22018, 0, 64 * 1024, 256, 0) },
{ "mx25l12855e", INFO(0xc22618, 0, 64 * 1024, 256, 0) },
{ "mx25l25635e", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ) },
+ { "mx25l25635f", INFO(0xc22019, 0, 64 * 1024, 512, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
{ "mx25u25635f", INFO(0xc22539, 0, 64 * 1024, 512, SECT_4K | SPI_NOR_4B_OPCODES) },
{ "mx25l25655e", INFO(0xc22619, 0, 64 * 1024, 512, 0) },
{ "mx66l51235l", INFO(0xc2201a, 0, 64 * 1024, 1024, SPI_NOR_DUAL_READ | SPI_NOR_QUAD_READ | SPI_NOR_4B_OPCODES) },
@@ -1216,11 +1217,12 @@ static const struct flash_info spi_nor_i
{ },
};
-static const struct flash_info *spi_nor_read_id(struct spi_nor *nor)
+static const struct flash_info *spi_nor_read_id(struct spi_nor *nor,
+ const char *name)
{
int tmp;
u8 id[SPI_NOR_MAX_ID_LEN];
- const struct flash_info *info;
+ const struct flash_info *info, *first_match = NULL;
tmp = nor->read_reg(nor, SPINOR_OP_RDID, id, SPI_NOR_MAX_ID_LEN);
if (tmp < 0) {
@@ -1231,10 +1233,16 @@ static const struct flash_info *spi_nor_
for (tmp = 0; tmp < ARRAY_SIZE(spi_nor_ids) - 1; tmp++) {
info = &spi_nor_ids[tmp];
if (info->id_len) {
- if (!memcmp(info->id, id, info->id_len))
- return &spi_nor_ids[tmp];
+ if (!memcmp(info->id, id, info->id_len)) {
+ if (!name || !strcmp(name, info->name))
+ return info;
+ if (!first_match)
+ first_match = info;
+ }
}
}
+ if (first_match)
+ return first_match;
dev_err(nor->dev, "unrecognized JEDEC id bytes: %02x, %02x, %02x\n",
id[0], id[1], id[2]);
return ERR_PTR(-ENODEV);
@@ -2703,7 +2711,7 @@ int spi_nor_scan(struct spi_nor *nor, co
info = spi_nor_match_id(name);
/* Try to auto-detect if chip name wasn't specified or not found */
if (!info)
- info = spi_nor_read_id(nor);
+ info = spi_nor_read_id(nor, NULL);
if (IS_ERR_OR_NULL(info))
return -ENOENT;
@@ -2714,7 +2722,7 @@ int spi_nor_scan(struct spi_nor *nor, co
if (name && info->id_len) {
const struct flash_info *jinfo;
- jinfo = spi_nor_read_id(nor);
+ jinfo = spi_nor_read_id(nor, name);
if (IS_ERR(jinfo)) {
return PTR_ERR(jinfo);
} else if (jinfo != info) {