mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-29 10:08:59 +00:00
62b7f5931c
bcm2708: boot tested on RPi B+ v1.2
bcm2709: boot tested on RPi 3B v1.2 and RPi 4B v1.1 4G
bcm2710: boot tested on RPi 3B v1.2
bcm2711: boot tested on RPi 4B v1.1 4G
Signed-off-by: Álvaro Fernández Rojas <noltari@gmail.com>
(cherry-picked from commit f07e572f64)
94 lines
3.1 KiB
Diff
94 lines
3.1 KiB
Diff
From 11f89a12530471a2b25c71416e106eaa014818c0 Mon Sep 17 00:00:00 2001
|
|
From: Phil Elwell <phil@raspberrypi.com>
|
|
Date: Fri, 5 Jun 2020 16:07:07 +0100
|
|
Subject: [PATCH] overlays: i2c-gpio: Avoid open-drain warnings
|
|
|
|
The i2c-gpio driver expects to use a GPIO in open-drain mode. Failure
|
|
to configure it in that way causes alarming warnings in the kernel log.
|
|
The BCM283x and BCM2711 GPIO blocks don't support open-drain mode, but
|
|
gpiolib can emulate it in software if configured correctly.
|
|
|
|
Silence the warning by declaring the GPIOs as requiring open-drain
|
|
mode, trusting gpiolib to manage the emulation. The previous
|
|
incarnation of this patch took the other approach of telling the
|
|
i2c-gpio driver that the GPIOs were configured for open-drain, but
|
|
this had the effect of disabling the emulation. In some cases this
|
|
appears to work, but examining the waveforms as analogue voltages
|
|
shows contention, the success or failure depending on drive strengths.
|
|
|
|
See: https://github.com/raspberrypi/firmware/issues/1381
|
|
See: https://github.com/raspberrypi/firmware/issues/1401
|
|
|
|
Signed-off-by: Phil Elwell <phil@raspberrypi.com>
|
|
---
|
|
arch/arm/boot/dts/overlays/balena-fin-overlay.dts | 5 ++++-
|
|
arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts | 6 ++++--
|
|
arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts | 6 ++++--
|
|
3 files changed, 12 insertions(+), 5 deletions(-)
|
|
|
|
--- a/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/balena-fin-overlay.dts
|
|
@@ -1,6 +1,8 @@
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
/{
|
|
compatible = "brcm,bcm2835";
|
|
|
|
@@ -48,7 +50,8 @@
|
|
|
|
i2c_soft: i2c@0 {
|
|
compatible = "i2c-gpio";
|
|
- gpios = <&gpio 43 0 /* sda */ &gpio 42 0 /* scl */>;
|
|
+ gpios = <&gpio 43 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
|
|
+ &gpio 42 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */>;
|
|
i2c-gpio,delay-us = <5>;
|
|
i2c-gpio,scl-open-drain;
|
|
i2c-gpio,sda-open-drain;
|
|
--- a/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/i2c-gpio-overlay.dts
|
|
@@ -2,6 +2,8 @@
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
/ {
|
|
compatible = "brcm,bcm2835";
|
|
|
|
@@ -12,8 +14,8 @@
|
|
i2c_gpio: i2c@0 {
|
|
reg = <0xffffffff>;
|
|
compatible = "i2c-gpio";
|
|
- gpios = <&gpio 23 0 /* sda */
|
|
- &gpio 24 0 /* scl */
|
|
+ gpios = <&gpio 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
|
|
+ &gpio 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
|
|
>;
|
|
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
|
#address-cells = <1>;
|
|
--- a/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
|
|
+++ b/arch/arm/boot/dts/overlays/i2c-rtc-gpio-overlay.dts
|
|
@@ -3,6 +3,8 @@
|
|
/dts-v1/;
|
|
/plugin/;
|
|
|
|
+#include <dt-bindings/gpio/gpio.h>
|
|
+
|
|
/ {
|
|
compatible = "brcm,bcm2835";
|
|
|
|
@@ -11,8 +13,8 @@
|
|
__overlay__ {
|
|
i2c_gpio: i2c-gpio-rtc@0 {
|
|
compatible = "i2c-gpio";
|
|
- gpios = <&gpio 23 0 /* sda */
|
|
- &gpio 24 0 /* scl */
|
|
+ gpios = <&gpio 23 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* sda */
|
|
+ &gpio 24 (GPIO_ACTIVE_HIGH|GPIO_OPEN_DRAIN) /* scl */
|
|
>;
|
|
i2c-gpio,delay-us = <2>; /* ~100 kHz */
|
|
#address-cells = <1>;
|