mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
cd1e9c88f3
Backport A64 unstable timer patches from linux 5.1 Signed-off-by: Oskari Lemmela <oskari@lemmela.net> [Split the single patch into the two original patches] Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de>
245 lines
10 KiB
Diff
245 lines
10 KiB
Diff
From 7cd6dca3600d8d71328950216688ecd00015d1ce Mon Sep 17 00:00:00 2001
|
|
From: Samuel Holland <samuel@sholland.org>
|
|
Date: Sat, 12 Jan 2019 20:17:18 -0600
|
|
Subject: [PATCH] clocksource/drivers/arch_timer: Workaround for Allwinner A64
|
|
timer instability
|
|
MIME-Version: 1.0
|
|
Content-Type: text/plain; charset=UTF-8
|
|
Content-Transfer-Encoding: 8bit
|
|
|
|
The Allwinner A64 SoC is known[1] to have an unstable architectural
|
|
timer, which manifests itself most obviously in the time jumping forward
|
|
a multiple of 95 years[2][3]. This coincides with 2^56 cycles at a
|
|
timer frequency of 24 MHz, implying that the time went slightly backward
|
|
(and this was interpreted by the kernel as it jumping forward and
|
|
wrapping around past the epoch).
|
|
|
|
Investigation revealed instability in the low bits of CNTVCT at the
|
|
point a high bit rolls over. This leads to power-of-two cycle forward
|
|
and backward jumps. (Testing shows that forward jumps are about twice as
|
|
likely as backward jumps.) Since the counter value returns to normal
|
|
after an indeterminate read, each "jump" really consists of both a
|
|
forward and backward jump from the software perspective.
|
|
|
|
Unless the kernel is trapping CNTVCT reads, a userspace program is able
|
|
to read the register in a loop faster than it changes. A test program
|
|
running on all 4 CPU cores that reported jumps larger than 100 ms was
|
|
run for 13.6 hours and reported the following:
|
|
|
|
Count | Event
|
|
-------+---------------------------
|
|
9940 | jumped backward 699ms
|
|
268 | jumped backward 1398ms
|
|
1 | jumped backward 2097ms
|
|
16020 | jumped forward 175ms
|
|
6443 | jumped forward 699ms
|
|
2976 | jumped forward 1398ms
|
|
9 | jumped forward 356516ms
|
|
9 | jumped forward 357215ms
|
|
4 | jumped forward 714430ms
|
|
1 | jumped forward 3578440ms
|
|
|
|
This works out to a jump larger than 100 ms about every 5.5 seconds on
|
|
each CPU core.
|
|
|
|
The largest jump (almost an hour!) was the following sequence of reads:
|
|
0x0000007fffffffff → 0x00000093feffffff → 0x0000008000000000
|
|
|
|
Note that the middle bits don't necessarily all read as all zeroes or
|
|
all ones during the anomalous behavior; however the low 10 bits checked
|
|
by the function in this patch have never been observed with any other
|
|
value.
|
|
|
|
Also note that smaller jumps are much more common, with backward jumps
|
|
of 2048 (2^11) cycles observed over 400 times per second on each core.
|
|
(Of course, this is partially explained by lower bits rolling over more
|
|
frequently.) Any one of these could have caused the 95 year time skip.
|
|
|
|
Similar anomalies were observed while reading CNTPCT (after patching the
|
|
kernel to allow reads from userspace). However, the CNTPCT jumps are
|
|
much less frequent, and only small jumps were observed. The same program
|
|
as before (except now reading CNTPCT) observed after 72 hours:
|
|
|
|
Count | Event
|
|
-------+---------------------------
|
|
17 | jumped backward 699ms
|
|
52 | jumped forward 175ms
|
|
2831 | jumped forward 699ms
|
|
5 | jumped forward 1398ms
|
|
|
|
Further investigation showed that the instability in CNTPCT/CNTVCT also
|
|
affected the respective timer's TVAL register. The following values were
|
|
observed immediately after writing CNVT_TVAL to 0x10000000:
|
|
|
|
CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error
|
|
--------------------+------------+--------------------+-----------------
|
|
0x000000d4a2d8bfff | 0x10003fff | 0x000000d4b2d8bfff | +0x00004000
|
|
0x000000d4a2d94000 | 0x0fffffff | 0x000000d4b2d97fff | -0x00004000
|
|
0x000000d4a2d97fff | 0x10003fff | 0x000000d4b2d97fff | +0x00004000
|
|
0x000000d4a2d9c000 | 0x0fffffff | 0x000000d4b2d9ffff | -0x00004000
|
|
|
|
The pattern of errors in CNTV_TVAL seemed to depend on exactly which
|
|
value was written to it. For example, after writing 0x10101010:
|
|
|
|
CNTVCT | CNTV_TVAL | CNTV_CVAL | CNTV_TVAL Error
|
|
--------------------+------------+--------------------+-----------------
|
|
0x000001ac3effffff | 0x1110100f | 0x000001ac4f10100f | +0x1000000
|
|
0x000001ac40000000 | 0x1010100f | 0x000001ac5110100f | -0x1000000
|
|
0x000001ac58ffffff | 0x1110100f | 0x000001ac6910100f | +0x1000000
|
|
0x000001ac66000000 | 0x1010100f | 0x000001ac7710100f | -0x1000000
|
|
0x000001ac6affffff | 0x1110100f | 0x000001ac7b10100f | +0x1000000
|
|
0x000001ac6e000000 | 0x1010100f | 0x000001ac7f10100f | -0x1000000
|
|
|
|
I was also twice able to reproduce the issue covered by Allwinner's
|
|
workaround[4], that writing to TVAL sometimes fails, and both CVAL and
|
|
TVAL are left with entirely bogus values. One was the following values:
|
|
|
|
CNTVCT | CNTV_TVAL | CNTV_CVAL
|
|
--------------------+------------+--------------------------------------
|
|
0x000000d4a2d6014c | 0x8fbd5721 | 0x000000d132935fff (615s in the past)
|
|
Reviewed-by: Marc Zyngier <marc.zyngier@arm.com>
|
|
|
|
========================================================================
|
|
|
|
Because the CPU can read the CNTPCT/CNTVCT registers faster than they
|
|
change, performing two reads of the register and comparing the high bits
|
|
(like other workarounds) is not a workable solution. And because the
|
|
timer can jump both forward and backward, no pair of reads can
|
|
distinguish a good value from a bad one. The only way to guarantee a
|
|
good value from consecutive reads would be to read _three_ times, and
|
|
take the middle value only if the three values are 1) each unique and
|
|
2) increasing. This takes at minimum 3 counter cycles (125 ns), or more
|
|
if an anomaly is detected.
|
|
|
|
However, since there is a distinct pattern to the bad values, we can
|
|
optimize the common case (1022/1024 of the time) to a single read by
|
|
simply ignoring values that match the error pattern. This still takes no
|
|
more than 3 cycles in the worst case, and requires much less code. As an
|
|
additional safety check, we still limit the loop iteration to the number
|
|
of max-frequency (1.2 GHz) CPU cycles in three 24 MHz counter periods.
|
|
|
|
For the TVAL registers, the simple solution is to not use them. Instead,
|
|
read or write the CVAL and calculate the TVAL value in software.
|
|
|
|
Although the manufacturer is aware of at least part of the erratum[4],
|
|
there is no official name for it. For now, use the kernel-internal name
|
|
"UNKNOWN1".
|
|
|
|
[1]: https://github.com/armbian/build/commit/a08cd6fe7ae9
|
|
[2]: https://forum.armbian.com/topic/3458-a64-datetime-clock-issue/
|
|
[3]: https://irclog.whitequark.org/linux-sunxi/2018-01-26
|
|
[4]: https://github.com/Allwinner-Homlet/H6-BSP4.9-linux/blob/master/drivers/clocksource/arm_arch_timer.c#L272
|
|
|
|
Acked-by: Maxime Ripard <maxime.ripard@bootlin.com>
|
|
Tested-by: Andre Przywara <andre.przywara@arm.com>
|
|
Signed-off-by: Samuel Holland <samuel@sholland.org>
|
|
Cc: stable@vger.kernel.org
|
|
Signed-off-by: Daniel Lezcano <daniel.lezcano@linaro.org>
|
|
---
|
|
Documentation/arm64/silicon-errata.txt | 2 +
|
|
drivers/clocksource/Kconfig | 10 +++++
|
|
drivers/clocksource/arm_arch_timer.c | 55 ++++++++++++++++++++++++++
|
|
3 files changed, 67 insertions(+)
|
|
|
|
--- a/Documentation/arm64/silicon-errata.txt
|
|
+++ b/Documentation/arm64/silicon-errata.txt
|
|
@@ -44,6 +44,8 @@ stable kernels.
|
|
|
|
| Implementor | Component | Erratum ID | Kconfig |
|
|
+----------------+-----------------+-----------------+-----------------------------+
|
|
+| Allwinner | A64/R18 | UNKNOWN1 | SUN50I_ERRATUM_UNKNOWN1 |
|
|
+| | | | |
|
|
| ARM | Cortex-A53 | #826319 | ARM64_ERRATUM_826319 |
|
|
| ARM | Cortex-A53 | #827319 | ARM64_ERRATUM_827319 |
|
|
| ARM | Cortex-A53 | #824069 | ARM64_ERRATUM_824069 |
|
|
--- a/drivers/clocksource/Kconfig
|
|
+++ b/drivers/clocksource/Kconfig
|
|
@@ -374,6 +374,16 @@ config ARM64_ERRATUM_858921
|
|
The workaround will be dynamically enabled when an affected
|
|
core is detected.
|
|
|
|
+config SUN50I_ERRATUM_UNKNOWN1
|
|
+ bool "Workaround for Allwinner A64 erratum UNKNOWN1"
|
|
+ default y
|
|
+ depends on ARM_ARCH_TIMER && ARM64 && ARCH_SUNXI
|
|
+ select ARM_ARCH_TIMER_OOL_WORKAROUND
|
|
+ help
|
|
+ This option enables a workaround for instability in the timer on
|
|
+ the Allwinner A64 SoC. The workaround will only be active if the
|
|
+ allwinner,erratum-unknown1 property is found in the timer node.
|
|
+
|
|
config ARM_GLOBAL_TIMER
|
|
bool "Support for the ARM global timer" if COMPILE_TEST
|
|
select TIMER_OF if OF
|
|
--- a/drivers/clocksource/arm_arch_timer.c
|
|
+++ b/drivers/clocksource/arm_arch_timer.c
|
|
@@ -317,6 +317,48 @@ static u64 notrace arm64_858921_read_cnt
|
|
}
|
|
#endif
|
|
|
|
+#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1
|
|
+/*
|
|
+ * The low bits of the counter registers are indeterminate while bit 10 or
|
|
+ * greater is rolling over. Since the counter value can jump both backward
|
|
+ * (7ff -> 000 -> 800) and forward (7ff -> fff -> 800), ignore register values
|
|
+ * with all ones or all zeros in the low bits. Bound the loop by the maximum
|
|
+ * number of CPU cycles in 3 consecutive 24 MHz counter periods.
|
|
+ */
|
|
+#define __sun50i_a64_read_reg(reg) ({ \
|
|
+ u64 _val; \
|
|
+ int _retries = 150; \
|
|
+ \
|
|
+ do { \
|
|
+ _val = read_sysreg(reg); \
|
|
+ _retries--; \
|
|
+ } while (((_val + 1) & GENMASK(9, 0)) <= 1 && _retries); \
|
|
+ \
|
|
+ WARN_ON_ONCE(!_retries); \
|
|
+ _val; \
|
|
+})
|
|
+
|
|
+static u64 notrace sun50i_a64_read_cntpct_el0(void)
|
|
+{
|
|
+ return __sun50i_a64_read_reg(cntpct_el0);
|
|
+}
|
|
+
|
|
+static u64 notrace sun50i_a64_read_cntvct_el0(void)
|
|
+{
|
|
+ return __sun50i_a64_read_reg(cntvct_el0);
|
|
+}
|
|
+
|
|
+static u32 notrace sun50i_a64_read_cntp_tval_el0(void)
|
|
+{
|
|
+ return read_sysreg(cntp_cval_el0) - sun50i_a64_read_cntpct_el0();
|
|
+}
|
|
+
|
|
+static u32 notrace sun50i_a64_read_cntv_tval_el0(void)
|
|
+{
|
|
+ return read_sysreg(cntv_cval_el0) - sun50i_a64_read_cntvct_el0();
|
|
+}
|
|
+#endif
|
|
+
|
|
#ifdef CONFIG_ARM_ARCH_TIMER_OOL_WORKAROUND
|
|
DEFINE_PER_CPU(const struct arch_timer_erratum_workaround *,
|
|
timer_unstable_counter_workaround);
|
|
@@ -404,6 +446,19 @@ static const struct arch_timer_erratum_w
|
|
.read_cntvct_el0 = arm64_858921_read_cntvct_el0,
|
|
},
|
|
#endif
|
|
+#ifdef CONFIG_SUN50I_ERRATUM_UNKNOWN1
|
|
+ {
|
|
+ .match_type = ate_match_dt,
|
|
+ .id = "allwinner,erratum-unknown1",
|
|
+ .desc = "Allwinner erratum UNKNOWN1",
|
|
+ .read_cntp_tval_el0 = sun50i_a64_read_cntp_tval_el0,
|
|
+ .read_cntv_tval_el0 = sun50i_a64_read_cntv_tval_el0,
|
|
+ .read_cntpct_el0 = sun50i_a64_read_cntpct_el0,
|
|
+ .read_cntvct_el0 = sun50i_a64_read_cntvct_el0,
|
|
+ .set_next_event_phys = erratum_set_next_event_tval_phys,
|
|
+ .set_next_event_virt = erratum_set_next_event_tval_virt,
|
|
+ },
|
|
+#endif
|
|
};
|
|
|
|
typedef bool (*ate_match_fn_t)(const struct arch_timer_erratum_workaround *,
|