mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-28 09:39:00 +00:00
92 lines
3.3 KiB
Diff
92 lines
3.3 KiB
Diff
From 5afe695ddcc560424d2b98984902a578ae8e416c Mon Sep 17 00:00:00 2001
|
|
From: Mariusz Bialonczyk <manio@skyboo.net>
|
|
Date: Mon, 4 Mar 2019 12:23:36 +0100
|
|
Subject: [PATCH 496/725] w1: ds2482: cosmetic fixes after 54865314f5a1
|
|
|
|
commit 5cb27d30fc3a281e830a2099d520b469e2b82008 upstream.
|
|
|
|
We have a helper function ds2482_calculate_config() which is calculating
|
|
the config value, so just use it instead of passing the same variable
|
|
in all calls to this function.
|
|
|
|
Also fixes the placement of module parameters to match with:
|
|
50fa2951bd74 (w1: Organize driver source to natural/common order)
|
|
by Andrew F. Davis
|
|
|
|
Signed-off-by: Mariusz Bialonczyk <manio@skyboo.net>
|
|
Cc: Andrew Worsley <amworsley@gmail.com>
|
|
Cc: Andrew F. Davis <afd@ti.com>
|
|
Signed-off-by: Greg Kroah-Hartman <gregkh@linuxfoundation.org>
|
|
---
|
|
drivers/w1/masters/ds2482.c | 18 +++++++++++-------
|
|
1 file changed, 11 insertions(+), 7 deletions(-)
|
|
|
|
--- a/drivers/w1/masters/ds2482.c
|
|
+++ b/drivers/w1/masters/ds2482.c
|
|
@@ -37,6 +37,11 @@ module_param_named(active_pullup, ds2482
|
|
MODULE_PARM_DESC(active_pullup, "Active pullup (apply to all buses): " \
|
|
"0-disable, 1-enable (default)");
|
|
|
|
+/* extra configurations - e.g. 1WS */
|
|
+static int extra_config;
|
|
+module_param(extra_config, int, S_IRUGO | S_IWUSR);
|
|
+MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
|
|
+
|
|
/**
|
|
* The DS2482 registers - there are 3 registers that are addressed by a read
|
|
* pointer. The read pointer is set by the last command executed.
|
|
@@ -70,8 +75,6 @@ MODULE_PARM_DESC(active_pullup, "Active
|
|
#define DS2482_REG_CFG_PPM 0x02 /* presence pulse masking */
|
|
#define DS2482_REG_CFG_APU 0x01 /* active pull-up */
|
|
|
|
-/* extra configurations - e.g. 1WS */
|
|
-static int extra_config;
|
|
|
|
/**
|
|
* Write and verify codes for the CHANNEL_SELECT command (DS2482-800 only).
|
|
@@ -130,6 +133,8 @@ struct ds2482_data {
|
|
*/
|
|
static inline u8 ds2482_calculate_config(u8 conf)
|
|
{
|
|
+ conf |= extra_config;
|
|
+
|
|
if (ds2482_active_pullup)
|
|
conf |= DS2482_REG_CFG_APU;
|
|
|
|
@@ -405,7 +410,7 @@ static u8 ds2482_w1_reset_bus(void *data
|
|
/* If the chip did reset since detect, re-config it */
|
|
if (err & DS2482_REG_STS_RST)
|
|
ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
|
|
- ds2482_calculate_config(extra_config));
|
|
+ ds2482_calculate_config(0x00));
|
|
}
|
|
|
|
mutex_unlock(&pdev->access_lock);
|
|
@@ -431,7 +436,8 @@ static u8 ds2482_w1_set_pullup(void *dat
|
|
ds2482_wait_1wire_idle(pdev);
|
|
/* note: it seems like both SPU and APU have to be set! */
|
|
retval = ds2482_send_cmd_data(pdev, DS2482_CMD_WRITE_CONFIG,
|
|
- ds2482_calculate_config(extra_config|DS2482_REG_CFG_SPU|DS2482_REG_CFG_APU));
|
|
+ ds2482_calculate_config(DS2482_REG_CFG_SPU |
|
|
+ DS2482_REG_CFG_APU));
|
|
ds2482_wait_1wire_idle(pdev);
|
|
}
|
|
|
|
@@ -484,7 +490,7 @@ static int ds2482_probe(struct i2c_clien
|
|
|
|
/* Set all config items to 0 (off) */
|
|
ds2482_send_cmd_data(data, DS2482_CMD_WRITE_CONFIG,
|
|
- ds2482_calculate_config(extra_config));
|
|
+ ds2482_calculate_config(0x00));
|
|
|
|
mutex_init(&data->access_lock);
|
|
|
|
@@ -559,7 +565,5 @@ module_i2c_driver(ds2482_driver);
|
|
|
|
MODULE_AUTHOR("Ben Gardner <bgardner@wabtec.com>");
|
|
MODULE_DESCRIPTION("DS2482 driver");
|
|
-module_param(extra_config, int, S_IRUGO | S_IWUSR);
|
|
-MODULE_PARM_DESC(extra_config, "Extra Configuration settings 1=APU,2=PPM,3=SPU,8=1WS");
|
|
|
|
MODULE_LICENSE("GPL");
|