openwrt/target/linux/ipq806x/patches-6.1/108-02-ARM-dts-qcom-add-MDIO-dedicated-controller-node-for-.patch
Christian Marangi 3bf06ea9b3
kernel/ipq806x: Restore kernel files for v6.1
This is an automatically generated commit which aids following Kernel patch history,
as git will see the move and copy as a rename thus defeating the purpose.

See: https://lists.openwrt.org/pipermail/openwrt-devel/2023-October/041673.html
for the original discussion.

Signed-off-by: Christian Marangi <ansuelsmth@gmail.com>
2024-04-02 23:46:00 +02:00

189 lines
3.6 KiB
Diff

From 504188183408fac0f61b59f5ed8ea1773fe43669 Mon Sep 17 00:00:00 2001
From: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
Date: Wed, 15 Jun 2022 16:59:30 +0200
Subject: [PATCH 2/2] ARM: dts: qcom: add MDIO dedicated controller node for
ipq806x
Add MDIO dedicated controller attached to gmac0 and fix rb3011 dts to
correctly use the new tag.
Signed-off-by: Christian 'Ansuel' Marangi <ansuelsmth@gmail.com>
---
arch/arm/boot/dts/qcom-ipq8064-rb3011.dts | 134 +++++++++++-----------
arch/arm/boot/dts/qcom-ipq8064.dtsi | 14 +++
2 files changed, 81 insertions(+), 67 deletions(-)
--- a/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
+++ b/arch/arm/boot/dts/qcom-ipq8064-rb3011.dts
@@ -25,73 +25,6 @@
device_type = "memory";
};
- mdio0: mdio-0 {
- status = "okay";
- compatible = "virtual,mdio-gpio";
- gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
- <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
- #address-cells = <1>;
- #size-cells = <0>;
-
- pinctrl-0 = <&mdio0_pins>;
- pinctrl-names = "default";
-
- switch0: switch@10 {
- compatible = "qca,qca8337";
- #address-cells = <1>;
- #size-cells = <0>;
-
- dsa,member = <0 0>;
-
- pinctrl-0 = <&sw0_reset_pin>;
- pinctrl-names = "default";
-
- reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
- reg = <0x10>;
-
- ports {
- #address-cells = <1>;
- #size-cells = <0>;
-
- switch0cpu: port@0 {
- reg = <0>;
- label = "cpu";
- ethernet = <&gmac0>;
- phy-mode = "rgmii-id";
- fixed-link {
- speed = <1000>;
- full-duplex;
- };
- };
-
- port@1 {
- reg = <1>;
- label = "sw1";
- };
-
- port@2 {
- reg = <2>;
- label = "sw2";
- };
-
- port@3 {
- reg = <3>;
- label = "sw3";
- };
-
- port@4 {
- reg = <4>;
- label = "sw4";
- };
-
- port@5 {
- reg = <5>;
- label = "sw5";
- };
- };
- };
- };
-
mdio1: mdio-1 {
status = "okay";
compatible = "virtual,mdio-gpio";
@@ -222,6 +155,73 @@
status = "okay";
};
+&mdio0 {
+ status = "okay";
+ compatible = "virtual,mdio-gpio";
+ gpios = <&qcom_pinmux 1 GPIO_ACTIVE_HIGH>,
+ <&qcom_pinmux 0 GPIO_ACTIVE_HIGH>;
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ pinctrl-0 = <&mdio0_pins>;
+ pinctrl-names = "default";
+
+ switch0: switch@10 {
+ compatible = "qca,qca8337";
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ dsa,member = <0 0>;
+
+ pinctrl-0 = <&sw0_reset_pin>;
+ pinctrl-names = "default";
+
+ reset-gpios = <&qcom_pinmux 16 GPIO_ACTIVE_LOW>;
+ reg = <0x10>;
+
+ ports {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ switch0cpu: port@0 {
+ reg = <0>;
+ label = "cpu";
+ ethernet = <&gmac0>;
+ phy-mode = "rgmii-id";
+ fixed-link {
+ speed = <1000>;
+ full-duplex;
+ };
+ };
+
+ port@1 {
+ reg = <1>;
+ label = "sw1";
+ };
+
+ port@2 {
+ reg = <2>;
+ label = "sw2";
+ };
+
+ port@3 {
+ reg = <3>;
+ label = "sw3";
+ };
+
+ port@4 {
+ reg = <4>;
+ label = "sw4";
+ };
+
+ port@5 {
+ reg = <5>;
+ label = "sw5";
+ };
+ };
+ };
+};
+
&gmac0 {
status = "okay";
--- a/arch/arm/boot/dts/qcom-ipq8064.dtsi
+++ b/arch/arm/boot/dts/qcom-ipq8064.dtsi
@@ -476,6 +476,20 @@
snps,blen = <16 0 0 0 0 0 0>;
};
+ mdio0: mdio@37000000 {
+ #address-cells = <1>;
+ #size-cells = <0>;
+
+ compatible = "qcom,ipq8064-mdio", "syscon";
+ reg = <0x37000000 0x200000>;
+ resets = <&gcc GMAC_CORE1_RESET>;
+ reset-names = "stmmaceth";
+ clocks = <&gcc GMAC_CORE1_CLK>;
+ clock-names = "stmmaceth";
+
+ status = "disabled";
+ };
+
vsdcc_fixed: vsdcc-regulator {
compatible = "regulator-fixed";
regulator-name = "SDCC Power";