ExternalVendorCode/openwrt
1
0
Fork 0
mirror of https://github.com/openwrt/openwrt.git synced 2024-12-23 15:32:33 +00:00
Code Issues Actions 7 Packages Projects Releases Wiki Activity
068c4cf407
openwrt/target/linux/oxnas/files/drivers/pci/host/pcie-oxnas.c
Daniel Golle dcc34574ef oxnas: bring in new oxnas target 
Reboot the oxnas target based on Linux 4.14 by rebasing our support on
top of the now-existing upstream kernel support.
This commit brings oxnas support to the level of v4.17 having upstream
drivers for Ethernet, Serial and NAND flash.
Botch up OpenWrt's local drivers for EHCI, SATA and PCIe based on the
new platform code and device-tree.
Re-introduce base-files from old oxnas target which works for now but
needs further clean-up towards generic board support.

Functional issues:
 * PCIe won't come up (hence no USB3 on Shuttle KD20)
 * I2C bus of Akitio myCloud device is likely not to work (missing
   debounce support in new pinctrl driver)

Code-style issues:
 * plla/pllb needs further cleanup -- currently their users or writing
   into the syscon regmap after acquireling the clk instead of using
   defined clk_*_*() functions to setup multipliers and dividors.
 * PCIe phy needs its own little driver.
 * SATA driver is a monster and should be split into an mfd having
   a raidctrl regmap, sata controller, sata ports and sata phy.

Tested on MitraStar STG-212 aka. Medion Akoya MD86xxx and Shuttle KD20.

Signed-off-by: Daniel Golle <daniel@makrotopia.org>
2018-06-01 15:45:06 +02:00

947 lines
27 KiB
C
Raw Blame History

/*
* PCIe driver for PLX NAS782X SoCs
*
* This file is licensed under the terms of the GNU General Public
* License version 2. This program is licensed "as is" without any
* warranty of any kind, whether express or implied.
*/
#include <linux/kernel.h>
#include <linux/pci.h>
#include <linux/clk.h>
#include <linux/module.h>
#include <linux/mbus.h>
#include <linux/slab.h>
#include <linux/platform_device.h>
#include <linux/of_address.h>
#include <linux/of_pci.h>
#include <linux/of_irq.h>
#include <linux/of_platform.h>
#include <linux/of_gpio.h>
#include <linux/gpio.h>
#include <linux/delay.h>
#include <linux/clk.h>
#include <linux/reset.h>
#include <linux/io.h>
#include <linux/sizes.h>
#define OXNAS_UART1_BASE 0x44200000
#define OXNAS_UART1_SIZE SZ_32
#define OXNAS_UART1_BASE_VA 0xF0000000
#define OXNAS_UART2_BASE 0x44300000
#define OXNAS_UART2_SIZE SZ_32
#define OXNAS_PERCPU_BASE 0x47000000
#define OXNAS_PERCPU_SIZE SZ_8K
#define OXNAS_PERCPU_BASE_VA 0xF0002000
#define OXNAS_SYSCRTL_BASE 0x44E00000
#define OXNAS_SYSCRTL_SIZE SZ_4K
#define OXNAS_SYSCRTL_BASE_VA 0xF0004000
#define OXNAS_SECCRTL_BASE 0x44F00000
#define OXNAS_SECCRTL_SIZE SZ_4K
#define OXNAS_SECCRTL_BASE_VA 0xF0005000
#define OXNAS_RPSA_BASE 0x44400000
#define OXNAS_RPSA_SIZE SZ_4K
#define OXNAS_RPSA_BASE_VA 0xF0006000
#define OXNAS_RPSC_BASE 0x44500000
#define OXNAS_RPSC_SIZE SZ_4K
#define OXNAS_RPSC_BASE_VA 0xF0007000
/*
* Location of flags and vectors in SRAM for controlling the booting of the
* secondary ARM11 processors.
*/
#define OXNAS_SCU_BASE_VA OXNAS_PERCPU_BASE_VA
#define OXNAS_GICN_BASE_VA(n) (OXNAS_PERCPU_BASE_VA + 0x200 + n*0x100)
#define HOLDINGPEN_CPU IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
#define HOLDINGPEN_LOCATION IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
/**
* System block reset and clock control
*/
#define SYS_CTRL_PCI_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x20)
#define SYSCTRL_CLK_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x24)
#define SYS_CTRL_CLK_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x2C)
#define SYS_CTRL_CLK_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x30)
#define SYS_CTRL_RST_SET_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x34)
#define SYS_CTRL_RST_CLR_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x38)
#define SYS_CTRL_PLLSYS_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x48)
#define SYS_CTRL_CLK_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x64)
#define SYS_CTRL_PLLSYS_KEY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x6C)
#define SYS_CTRL_GMAC_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x78)
#define SYS_CTRL_GMAC_DELAY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x100)
/* Scratch registers */
#define SYS_CTRL_SCRATCHWORD0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc4)
#define SYS_CTRL_SCRATCHWORD1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xc8)
#define SYS_CTRL_SCRATCHWORD2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xcc)
#define SYS_CTRL_SCRATCHWORD3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xd0)
#define SYS_CTRL_PLLA_CTRL0 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F0)
#define SYS_CTRL_PLLA_CTRL1 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F4)
#define SYS_CTRL_PLLA_CTRL2 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1F8)
#define SYS_CTRL_PLLA_CTRL3 IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x1FC)
#define SYS_CTRL_USBHSMPH_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x40)
#define SYS_CTRL_USBHSMPH_STAT IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x44)
#define SYS_CTRL_REF300_DIV IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xF8)
#define SYS_CTRL_USBHSPHY_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x84)
#define SYS_CTRL_USB_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x90)
/* pcie */
#define SYS_CTRL_HCSL_CTRL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x114)
/* System control multi-function pin function selection */
#define SYS_CTRL_SECONDARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x14)
#define SYS_CTRL_TERTIARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x8c)
#define SYS_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x94)
#define SYS_CTRL_DEBUG_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0x9c)
#define SYS_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xa4)
#define SYS_CTRL_PULLUP_SEL IOMEM(OXNAS_SYSCRTL_BASE_VA + 0xac)
/* Secure control multi-function pin function selection */
#define SEC_CTRL_SECONDARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x14)
#define SEC_CTRL_TERTIARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x8c)
#define SEC_CTRL_QUATERNARY_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x94)
#define SEC_CTRL_DEBUG_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x9c)
#define SEC_CTRL_ALTERNATIVE_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xa4)
#define SEC_CTRL_PULLUP_SEL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xac)
#define SEC_CTRL_COPRO_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x68)
#define SEC_CTRL_SECURE_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0x98)
#define SEC_CTRL_LEON_DEBUG IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF0)
#define SEC_CTRL_PLLB_DIV_CTRL IOMEM(OXNAS_SECCRTL_BASE_VA + 0xF8)
#define SEC_CTRL_PLLB_CTRL0 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F0)
#define SEC_CTRL_PLLB_CTRL1 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
#define SEC_CTRL_PLLB_CTRL8 IOMEM(OXNAS_SECCRTL_BASE_VA + 0x1F4)
#define RPSA_IRQ_SOFT IOMEM(OXNAS_RPSA_BASE_VA + 0x10)
#define RPSA_FIQ_ENABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x108)
#define RPSA_FIQ_DISABLE IOMEM(OXNAS_RPSA_BASE_VA + 0x10C)
#define RPSA_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSA_BASE_VA + 0x1FC)
#define RPSC_IRQ_SOFT IOMEM(OXNAS_RPSC_BASE_VA + 0x10)
#define RPSC_FIQ_ENABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x108)
#define RPSC_FIQ_DISABLE IOMEM(OXNAS_RPSC_BASE_VA + 0x10C)
#define RPSC_FIQ_IRQ_TO_FIQ IOMEM(OXNAS_RPSC_BASE_VA + 0x1FC)
#define RPSA_TIMER2_VAL IOMEM(OXNAS_RPSA_BASE_VA + 0x224)
#define REF300_DIV_INT_SHIFT 8
#define REF300_DIV_FRAC_SHIFT 0
#define REF300_DIV_INT(val) ((val) << REF300_DIV_INT_SHIFT)
#define REF300_DIV_FRAC(val) ((val) << REF300_DIV_FRAC_SHIFT)
#define USBHSPHY_SUSPENDM_MANUAL_ENABLE 16
#define USBHSPHY_SUSPENDM_MANUAL_STATE 15
#define USBHSPHY_ATE_ESET 14
#define USBHSPHY_TEST_DIN 6
#define USBHSPHY_TEST_ADD 2
#define USBHSPHY_TEST_DOUT_SEL 1
#define USBHSPHY_TEST_CLK 0
#define USB_CTRL_USBAPHY_CKSEL_SHIFT 5
#define USB_CLK_XTAL0_XTAL1 (0 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_XTAL0 (1 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USB_CLK_INTERNAL (2 << USB_CTRL_USBAPHY_CKSEL_SHIFT)
#define USBAMUX_DEVICE BIT(4)
#define USBPHY_REFCLKDIV_SHIFT 2
#define USB_PHY_REF_12MHZ (0 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_24MHZ (1 << USBPHY_REFCLKDIV_SHIFT)
#define USB_PHY_REF_48MHZ (2 << USBPHY_REFCLKDIV_SHIFT)
#define USB_CTRL_USB_CKO_SEL_BIT 0
#define USB_INT_CLK_XTAL 0
#define USB_INT_CLK_REF300 2
#define USB_INT_CLK_PLLB 3
#define SYS_CTRL_GMAC_CKEN_RX_IN 14
#define SYS_CTRL_GMAC_CKEN_RXN_OUT 13
#define SYS_CTRL_GMAC_CKEN_RX_OUT 12
#define SYS_CTRL_GMAC_CKEN_TX_IN 10
#define SYS_CTRL_GMAC_CKEN_TXN_OUT 9
#define SYS_CTRL_GMAC_CKEN_TX_OUT 8
#define SYS_CTRL_GMAC_RX_SOURCE 7
#define SYS_CTRL_GMAC_TX_SOURCE 6
#define SYS_CTRL_GMAC_LOW_TX_SOURCE 4
#define SYS_CTRL_GMAC_AUTO_TX_SOURCE 3
#define SYS_CTRL_GMAC_RGMII 2
#define SYS_CTRL_GMAC_SIMPLE_MUX 1
#define SYS_CTRL_GMAC_CKEN_GTX 0
#define SYS_CTRL_GMAC_TX_VARDELAY_SHIFT 0
#define SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT 8
#define SYS_CTRL_GMAC_RX_VARDELAY_SHIFT 16
#define SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT 24
#define SYS_CTRL_GMAC_TX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TX_VARDELAY_SHIFT)
#define SYS_CTRL_GMAC_TXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_TXN_VARDELAY_SHIFT)
#define SYS_CTRL_GMAC_RX_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RX_VARDELAY_SHIFT)
#define SYS_CTRL_GMAC_RXN_VARDELAY(d) ((d)<<SYS_CTRL_GMAC_RXN_VARDELAY_SHIFT)
#define PLLB_BYPASS 1
#define PLLB_ENSAT 3
#define PLLB_OUTDIV 4
#define PLLB_REFDIV 8
#define PLLB_DIV_INT_SHIFT 8
#define PLLB_DIV_FRAC_SHIFT 0
#define PLLB_DIV_INT(val) ((val) << PLLB_DIV_INT_SHIFT)
#define PLLB_DIV_FRAC(val) ((val) << PLLB_DIV_FRAC_SHIFT)
#define SYS_CTRL_CKCTRL_PCI_DIV_BIT 0
#define SYS_CTRL_CKCTRL_SLOW_BIT 8
#define SYS_CTRL_UART2_DEQ_EN 0
#define SYS_CTRL_UART3_DEQ_EN 1
#define SYS_CTRL_UART3_IQ_EN 2
#define SYS_CTRL_UART4_IQ_EN 3
#define SYS_CTRL_UART4_NOT_PCI_MODE 4
#define SYS_CTRL_PCI_CTRL1_PCI_STATIC_RQ_BIT 11
#define PLLA_REFDIV_MASK 0x3F
#define PLLA_REFDIV_SHIFT 8
#define PLLA_OUTDIV_MASK 0x7
#define PLLA_OUTDIV_SHIFT 4
/* bit numbers of clock control register */
#define SYS_CTRL_CLK_COPRO 0
#define SYS_CTRL_CLK_DMA 1
#define SYS_CTRL_CLK_CIPHER 2
#define SYS_CTRL_CLK_SD 3
#define SYS_CTRL_CLK_SATA 4
#define SYS_CTRL_CLK_I2S 5
#define SYS_CTRL_CLK_USBHS 6
#define SYS_CTRL_CLK_MACA 7
#define SYS_CTRL_CLK_MAC SYS_CTRL_CLK_MACA
#define SYS_CTRL_CLK_PCIEA 8
#define SYS_CTRL_CLK_STATIC 9
#define SYS_CTRL_CLK_MACB 10
#define SYS_CTRL_CLK_PCIEB 11
#define SYS_CTRL_CLK_REF600 12
#define SYS_CTRL_CLK_USBDEV 13
#define SYS_CTRL_CLK_DDR 14
#define SYS_CTRL_CLK_DDRPHY 15
#define SYS_CTRL_CLK_DDRCK 16
/* bit numbers of reset control register */
#define SYS_CTRL_RST_SCU 0
#define SYS_CTRL_RST_COPRO 1
#define SYS_CTRL_RST_ARM0 2
#define SYS_CTRL_RST_ARM1 3
#define SYS_CTRL_RST_USBHS 4
#define SYS_CTRL_RST_USBHSPHYA 5
#define SYS_CTRL_RST_MACA 6
#define SYS_CTRL_RST_MAC SYS_CTRL_RST_MACA
#define SYS_CTRL_RST_PCIEA 7
#define SYS_CTRL_RST_SGDMA 8
#define SYS_CTRL_RST_CIPHER 9
#define SYS_CTRL_RST_DDR 10
#define SYS_CTRL_RST_SATA 11
#define SYS_CTRL_RST_SATA_LINK 12
#define SYS_CTRL_RST_SATA_PHY 13
#define SYS_CTRL_RST_PCIEPHY 14
#define SYS_CTRL_RST_STATIC 15
#define SYS_CTRL_RST_GPIO 16
#define SYS_CTRL_RST_UART1 17
#define SYS_CTRL_RST_UART2 18
#define SYS_CTRL_RST_MISC 19
#define SYS_CTRL_RST_I2S 20
#define SYS_CTRL_RST_SD 21
#define SYS_CTRL_RST_MACB 22
#define SYS_CTRL_RST_PCIEB 23
#define SYS_CTRL_RST_VIDEO 24
#define SYS_CTRL_RST_DDR_PHY 25
#define SYS_CTRL_RST_USBHSPHYB 26
#define SYS_CTRL_RST_USBDEV 27
#define SYS_CTRL_RST_ARMDBG 29
#define SYS_CTRL_RST_PLLA 30
#define SYS_CTRL_RST_PLLB 31
static inline void oxnas_register_clear_mask(void __iomem *p, unsigned mask)
{
u32 val = readl_relaxed(p);
val &= ~mask;
writel_relaxed(val, p);
}
static inline void oxnas_register_set_mask(void __iomem *p, unsigned mask)
{
u32 val = readl_relaxed(p);
val |= mask;
writel_relaxed(val, p);
}
static inline void oxnas_register_value_mask(void __iomem *p,
unsigned mask, unsigned new_value)
{
/* TODO sanity check mask & new_value = new_value */
u32 val = readl_relaxed(p);
val &= ~mask;
val |= new_value;
writel_relaxed(val, p);
}
#define VERSION_ID_MAGIC 0x082510b5
#define LINK_UP_TIMEOUT_SECONDS 1
#define NUM_CONTROLLERS 1
enum {
PCIE_DEVICE_TYPE_MASK = 0x0F,
PCIE_DEVICE_TYPE_ENDPOINT = 0,
PCIE_DEVICE_TYPE_LEGACY_ENDPOINT = 1,
PCIE_DEVICE_TYPE_ROOT = 4,
PCIE_LTSSM = BIT(4),
PCIE_READY_ENTR_L23 = BIT(9),
PCIE_LINK_UP = BIT(11),
PCIE_OBTRANS = BIT(12),
};
enum {
HCSL_BIAS_ON = BIT(0),
HCSL_PCIE_EN = BIT(1),
HCSL_PCIEA_EN = BIT(2),
HCSL_PCIEB_EN = BIT(3),
};
enum {
/* pcie phy reg offset */
PHY_ADDR = 0,
PHY_DATA = 4,
/* phy data reg bits */
READ_EN = BIT(16),
WRITE_EN = BIT(17),
CAP_DATA = BIT(18),
};
/* core config registers */
enum {
PCI_CONFIG_VERSION_DEVICEID = 0,
PCI_CONFIG_COMMAND_STATUS = 4,
};
/* inbound config registers */
enum {
IB_ADDR_XLATE_ENABLE = 0xFC,
/* bits */
ENABLE_IN_ADDR_TRANS = BIT(0),
};
/* outbound config registers, offset relative to PCIE_POM0_MEM_ADDR */
enum {
PCIE_POM0_MEM_ADDR = 0,
PCIE_POM1_MEM_ADDR = 4,
PCIE_IN0_MEM_ADDR = 8,
PCIE_IN1_MEM_ADDR = 12,
PCIE_IN_IO_ADDR = 16,
PCIE_IN_CFG0_ADDR = 20,
PCIE_IN_CFG1_ADDR = 24,
PCIE_IN_MSG_ADDR = 28,
PCIE_IN0_MEM_LIMIT = 32,
PCIE_IN1_MEM_LIMIT = 36,
PCIE_IN_IO_LIMIT = 40,
PCIE_IN_CFG0_LIMIT = 44,
PCIE_IN_CFG1_LIMIT = 48,
PCIE_IN_MSG_LIMIT = 52,
PCIE_AHB_SLAVE_CTRL = 56,
PCIE_SLAVE_BE_SHIFT = 22,
};
#define ADDR_VAL(val) ((val) & 0xFFFF)
#define DATA_VAL(val) ((val) & 0xFFFF)
#define PCIE_SLAVE_BE(val) ((val) << PCIE_SLAVE_BE_SHIFT)
#define PCIE_SLAVE_BE_MASK PCIE_SLAVE_BE(0xF)
struct oxnas_pcie_shared {
/* seems all access are serialized, no lock required */
int refcount;
};
/* Structure representing one PCIe interfaces */
struct oxnas_pcie {
void __iomem *cfgbase;
void __iomem *base;
void __iomem *inbound;
void __iomem *outbound;
void __iomem *pcie_ctrl;
int haslink;
struct platform_device *pdev;
struct resource io;
struct resource cfg;
struct resource pre_mem; /* prefetchable */
struct resource non_mem; /* non-prefetchable */
struct resource busn; /* max available bus numbers */
int card_reset; /* gpio pin, optional */
unsigned hcsl_en; /* hcsl pci enable bit */
struct clk *clk;
struct clk *busclk; /* for pcie bus, actually the PLLB */
void *private_data[1];
spinlock_t lock;
};
static struct oxnas_pcie_shared pcie_shared = {
.refcount = 0,
};
static inline struct oxnas_pcie *sys_to_pcie(struct pci_sys_data *sys)
{
return sys->private_data;
}
static inline void set_out_lanes(struct oxnas_pcie *pcie, unsigned lanes)
{
oxnas_register_value_mask(pcie->outbound + PCIE_AHB_SLAVE_CTRL,
PCIE_SLAVE_BE_MASK, PCIE_SLAVE_BE(lanes));
wmb();
}
static int oxnas_pcie_link_up(struct oxnas_pcie *pcie)
{
unsigned long end;
/* Poll for PCIE link up */
end = jiffies + (LINK_UP_TIMEOUT_SECONDS * HZ);
while (!time_after(jiffies, end)) {
if (readl(pcie->pcie_ctrl) & PCIE_LINK_UP)
return 1;
}
return 0;
}
static void __init oxnas_pcie_setup_hw(struct oxnas_pcie *pcie)
{
/* We won't have any inbound address translation. This allows PCI
* devices to access anywhere in the AHB address map. Might be regarded
* as a bit dangerous, but let's get things working before we worry
* about that
*/
oxnas_register_clear_mask(pcie->inbound + IB_ADDR_XLATE_ENABLE,
ENABLE_IN_ADDR_TRANS);
wmb();
/*
* Program outbound translation windows
*
* Outbound window is what is referred to as "PCI client" region in HRM
*
* Could use the larger alternative address space to get >>64M regions
* for graphics cards etc., but will not bother at this point.
*
* IP bug means that AMBA window size must be a power of 2
*
* Set mem0 window for first 16MB of outbound window non-prefetchable
* Set mem1 window for second 16MB of outbound window prefetchable
* Set io window for next 16MB of outbound window
* Set cfg0 for final 1MB of outbound window
*
* Ignore mem1, cfg1 and msg windows for now as no obvious use cases for
* 820 that would need them
*
* Probably ideally want no offset between mem0 window start as seen by
* ARM and as seen on PCI bus and get Linux to assign memory regions to
* PCI devices using the same "PCI client" region start address as seen
* by ARM
*/
/* Set PCIeA mem0 region to be 1st 16MB of the 64MB PCIeA window */
writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_IN0_MEM_ADDR);
writel_relaxed(pcie->non_mem.end, pcie->outbound + PCIE_IN0_MEM_LIMIT);
writel_relaxed(pcie->non_mem.start, pcie->outbound + PCIE_POM0_MEM_ADDR);
/* Set PCIeA mem1 region to be 2nd 16MB of the 64MB PCIeA window */
writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_IN1_MEM_ADDR);
writel_relaxed(pcie->pre_mem.end, pcie->outbound + PCIE_IN1_MEM_LIMIT);
writel_relaxed(pcie->pre_mem.start, pcie->outbound + PCIE_POM1_MEM_ADDR);
/* Set PCIeA io to be third 16M region of the 64MB PCIeA window*/
writel_relaxed(pcie->io.start, pcie->outbound + PCIE_IN_IO_ADDR);
writel_relaxed(pcie->io.end, pcie->outbound + PCIE_IN_IO_LIMIT);
/* Set PCIeA cgf0 to be last 16M region of the 64MB PCIeA window*/
writel_relaxed(pcie->cfg.start, pcie->outbound + PCIE_IN_CFG0_ADDR);
writel_relaxed(pcie->cfg.end, pcie->outbound + PCIE_IN_CFG0_LIMIT);
wmb();
/* Enable outbound address translation */
oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_OBTRANS);
wmb();
/*
* Program PCIe command register for core to:
* enable memory space
* enable bus master
* enable io
*/
writel_relaxed(7, pcie->base + PCI_CONFIG_COMMAND_STATUS);
/* which is which */
wmb();
}
static unsigned oxnas_pcie_cfg_to_offset(
struct pci_sys_data *sys,
unsigned char bus_number,
unsigned int devfn,
int where)
{
unsigned int function = PCI_FUNC(devfn);
unsigned int slot = PCI_SLOT(devfn);
unsigned char bus_number_offset;
bus_number_offset = bus_number - sys->busnr;
/*
* We'll assume for now that the offset, function, slot, bus encoding
* should map onto linear, contiguous addresses in PCIe config space,
* albeit that the majority will be unused as only slot 0 is valid for
* any PCIe bus and most devices have only function 0
*
* Could be that PCIe in fact works by not encoding the slot number into
* the config space address as it's known that only slot 0 is valid.
* We'll have to experiment if/when we get a PCIe switch connected to
* the PCIe host
*/
return (bus_number_offset << 20) | (slot << 15) | (function << 12) |
(where & ~3);
}
/* PCI configuration space write function */
static int oxnas_pcie_wr_conf(struct pci_bus *bus, u32 devfn,
int where, int size, u32 val)
{
unsigned long flags;
struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
unsigned offset;
u32 value;
u32 lanes;
/* Only a single device per bus for PCIe point-to-point links */
if (PCI_SLOT(devfn) > 0)
return PCIBIOS_DEVICE_NOT_FOUND;
if (!pcie->haslink)
return PCIBIOS_DEVICE_NOT_FOUND;
offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
where);
value = val << (8 * (where & 3));
lanes = (0xf >> (4-size)) << (where & 3);
/* it race with mem and io write, but the possibility is low, normally
* all config writes happens at driver initialize stage, wont interleave
* with others.
* and many pcie cards use dword (4bytes) access mem/io access only,
* so not bother to copy that ugly work-around now. */
spin_lock_irqsave(&pcie->lock, flags);
set_out_lanes(pcie, lanes);
writel_relaxed(value, pcie->cfgbase + offset);
set_out_lanes(pcie, 0xf);
spin_unlock_irqrestore(&pcie->lock, flags);
return PCIBIOS_SUCCESSFUL;
}
/* PCI configuration space read function */
static int oxnas_pcie_rd_conf(struct pci_bus *bus, u32 devfn, int where,
int size, u32 *val)
{
struct oxnas_pcie *pcie = sys_to_pcie(bus->sysdata);
unsigned offset;
u32 value;
u32 left_bytes, right_bytes;
/* Only a single device per bus for PCIe point-to-point links */
if (PCI_SLOT(devfn) > 0) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
if (!pcie->haslink) {
*val = 0xffffffff;
return PCIBIOS_DEVICE_NOT_FOUND;
}
offset = oxnas_pcie_cfg_to_offset(bus->sysdata, bus->number, devfn,
where);
value = readl_relaxed(pcie->cfgbase + offset);
left_bytes = where & 3;
right_bytes = 4 - left_bytes - size;
value <<= right_bytes * 8;
value >>= (left_bytes + right_bytes) * 8;
*val = value;
return PCIBIOS_SUCCESSFUL;
}
static struct pci_ops oxnas_pcie_ops = {
.read = oxnas_pcie_rd_conf,
.write = oxnas_pcie_wr_conf,
};
static int __init oxnas_pcie_setup(int nr, struct pci_sys_data *sys)
{
struct oxnas_pcie *pcie = sys_to_pcie(sys);
pci_add_resource_offset(&sys->resources, &pcie->non_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->pre_mem, sys->mem_offset);
pci_add_resource_offset(&sys->resources, &pcie->io, sys->io_offset);
pci_add_resource(&sys->resources, &pcie->busn);
if (sys->busnr == 0) { /* default one */
sys->busnr = pcie->busn.start;
}
/* do not use devm_ioremap_resource, it does not like cfg resource */
pcie->cfgbase = devm_ioremap(&pcie->pdev->dev, pcie->cfg.start,
resource_size(&pcie->cfg));
if (!pcie->cfgbase)
return -ENOMEM;
oxnas_pcie_setup_hw(pcie);
return 1;
}
static void __init oxnas_pcie_enable(struct device *dev, struct oxnas_pcie *pcie)
{
struct hw_pci hw;
int i;
memset(&hw, 0, sizeof(hw));
for (i = 0; i < NUM_CONTROLLERS; i++)
pcie->private_data[i] = pcie;
hw.nr_controllers = NUM_CONTROLLERS;
/* I think use stack pointer is a bad idea though it is valid in this case */
hw.private_data = pcie->private_data;
hw.setup = oxnas_pcie_setup;
hw.map_irq = of_irq_parse_and_map_pci;
hw.ops = &oxnas_pcie_ops;
/* pass dev to maintain of tree, interrupt mapping rely on this */
pci_common_init_dev(dev, &hw);
}
void oxnas_pcie_init_shared_hw(struct platform_device *pdev,
void __iomem *phybase)
{
struct reset_control *rstc;
int ret;
/* generate clocks from HCSL buffers, shared parts */
writel(HCSL_BIAS_ON|HCSL_PCIE_EN, SYS_CTRL_HCSL_CTRL);
/* Ensure PCIe PHY is properly reset */
rstc = reset_control_get(&pdev->dev, "phy");
if (IS_ERR(rstc)) {
ret = PTR_ERR(rstc);
} else {
ret = reset_control_reset(rstc);
reset_control_put(rstc);
}
if (ret) {
dev_err(&pdev->dev, "phy reset failed %d\n", ret);
return;
}
/* Enable PCIe Pre-Emphasis: What these value means? */
writel(ADDR_VAL(0x0014), phybase + PHY_ADDR);
writel(DATA_VAL(0xce10) | CAP_DATA, phybase + PHY_DATA);
writel(DATA_VAL(0xce10) | WRITE_EN, phybase + PHY_DATA);
writel(ADDR_VAL(0x2004), phybase + PHY_ADDR);
writel(DATA_VAL(0x82c7) | CAP_DATA, phybase + PHY_DATA);
writel(DATA_VAL(0x82c7) | WRITE_EN, phybase + PHY_DATA);
}
static int oxnas_pcie_shared_init(struct platform_device *pdev)
{
if (++pcie_shared.refcount == 1) {
/* we are the first */
struct device_node *np = pdev->dev.of_node;
void __iomem *phy = of_iomap(np, 2);
if (!phy) {
--pcie_shared.refcount;
return -ENOMEM;
}
oxnas_pcie_init_shared_hw(pdev, phy);
iounmap(phy);
return 0;
} else {
return 0;
}
}
#if 0
/* maybe we will call it when enter low power state */
static void oxnas_pcie_shared_deinit(struct platform_device *pdev)
{
if (--pcie_shared.refcount == 0) {
/* no cleanup needed */;
}
}
#endif
static int __init
oxnas_pcie_map_registers(struct platform_device *pdev,
struct device_node *np,
struct oxnas_pcie *pcie)
{
struct resource regs;
int ret = 0;
u32 outbound_ctrl_offset;
u32 pcie_ctrl_offset;
/* 2 is reserved for shared phy */
ret = of_address_to_resource(np, 0, &regs);
if (ret)
return -EINVAL;
pcie->base = devm_ioremap_resource(&pdev->dev, &regs);
if (!pcie->base)
return -ENOMEM;
ret = of_address_to_resource(np, 1, &regs);
if (ret)
return -EINVAL;
pcie->inbound = devm_ioremap_resource(&pdev->dev, &regs);
if (!pcie->inbound)
return -ENOMEM;
if (of_property_read_u32(np, "plxtech,pcie-outbound-offset",
&outbound_ctrl_offset))
return -EINVAL;
/* SYSCRTL is shared by too many drivers, so is mapped by board file */
pcie->outbound = IOMEM(OXNAS_SYSCRTL_BASE_VA + outbound_ctrl_offset);
if (of_property_read_u32(np, "plxtech,pcie-ctrl-offset",
&pcie_ctrl_offset))
return -EINVAL;
pcie->pcie_ctrl = IOMEM(OXNAS_SYSCRTL_BASE_VA + pcie_ctrl_offset);
return 0;
}
static int __init oxnas_pcie_init_res(struct platform_device *pdev,
struct oxnas_pcie *pcie,
struct device_node *np)
{
struct of_pci_range range;
struct of_pci_range_parser parser;
int ret;
if (of_pci_range_parser_init(&parser, np))
return -EINVAL;
/* Get the I/O and memory ranges from DT */
for_each_of_pci_range(&parser, &range) {
unsigned long restype = range.flags & IORESOURCE_TYPE_BITS;
if (restype == IORESOURCE_IO) {
of_pci_range_to_resource(&range, np, &pcie->io);
pcie->io.name = "I/O";
}
if (restype == IORESOURCE_MEM) {
if (range.flags & IORESOURCE_PREFETCH) {
of_pci_range_to_resource(&range, np, &pcie->pre_mem);
pcie->pre_mem.name = "PRE MEM";
} else {
of_pci_range_to_resource(&range, np, &pcie->non_mem);
pcie->non_mem.name = "NON MEM";
}
}
if (restype == 0)
of_pci_range_to_resource(&range, np, &pcie->cfg);
}
/* Get the bus range */
ret = of_pci_parse_bus_range(np, &pcie->busn);
if (ret) {
dev_err(&pdev->dev, "failed to parse bus-range property: %d\n",
ret);
return ret;
}
pcie->card_reset = of_get_gpio(np, 0);
if (pcie->card_reset < 0)
dev_info(&pdev->dev, "card reset gpio pin not exists\n");
if (of_property_read_u32(np, "plxtech,pcie-hcsl-bit", &pcie->hcsl_en))
return -EINVAL;
pcie->clk = of_clk_get_by_name(np, "pcie");
if (IS_ERR(pcie->clk)) {
return PTR_ERR(pcie->clk);
}
pcie->busclk = of_clk_get_by_name(np, "busclk");
if (IS_ERR(pcie->busclk)) {
clk_put(pcie->clk);
return PTR_ERR(pcie->busclk);
}
return 0;
}
static void oxnas_pcie_init_hw(struct platform_device *pdev,
struct oxnas_pcie *pcie)
{
u32 version_id;
int ret;
clk_prepare_enable(pcie->busclk);
/* reset PCIe cards use hard-wired gpio pin */
if (pcie->card_reset >= 0 &&
!gpio_direction_output(pcie->card_reset, 0)) {
wmb();
mdelay(10);
/* must tri-state the pin to pull it up */
gpio_direction_input(pcie->card_reset);
wmb();
mdelay(100);
}
oxnas_register_set_mask(SYS_CTRL_HCSL_CTRL, BIT(pcie->hcsl_en));
/* core */
ret = device_reset(&pdev->dev);
if (ret) {
dev_err(&pdev->dev, "core reset failed %d\n", ret);
return;
}
/* Start PCIe core clocks */
clk_prepare_enable(pcie->clk);
version_id = readl_relaxed(pcie->base + PCI_CONFIG_VERSION_DEVICEID);
dev_info(&pdev->dev, "PCIe version/deviceID 0x%x\n", version_id);
if (version_id != VERSION_ID_MAGIC) {
dev_info(&pdev->dev, "PCIe controller not found\n");
pcie->haslink = 0;
return;
}
/* allow entry to L23 state */
oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_READY_ENTR_L23);
/* Set PCIe core into RootCore mode */
oxnas_register_value_mask(pcie->pcie_ctrl, PCIE_DEVICE_TYPE_MASK,
PCIE_DEVICE_TYPE_ROOT);
wmb();
/* Bring up the PCI core */
oxnas_register_set_mask(pcie->pcie_ctrl, PCIE_LTSSM);
wmb();
}
static int __init oxnas_pcie_probe(struct platform_device *pdev)
{
struct oxnas_pcie *pcie;
struct device_node *np = pdev->dev.of_node;
int ret;
pcie = devm_kzalloc(&pdev->dev, sizeof(struct oxnas_pcie),
GFP_KERNEL);
if (!pcie)
return -ENOMEM;
pcie->pdev = pdev;
pcie->haslink = 1;
spin_lock_init(&pcie->lock);
ret = oxnas_pcie_init_res(pdev, pcie, np);
if (ret)
return ret;
if (pcie->card_reset >= 0) {
ret = gpio_request_one(pcie->card_reset, GPIOF_DIR_IN,
dev_name(&pdev->dev));
if (ret) {
dev_err(&pdev->dev, "cannot request gpio pin %d\n",
pcie->card_reset);
return ret;
}
}
ret = oxnas_pcie_map_registers(pdev, np, pcie);
if (ret) {
dev_err(&pdev->dev, "cannot map registers\n");
goto err_free_gpio;
}
ret = oxnas_pcie_shared_init(pdev);
if (ret)
goto err_free_gpio;
/* if hw not found, haslink cleared */
oxnas_pcie_init_hw(pdev, pcie);
if (pcie->haslink && oxnas_pcie_link_up(pcie)) {
pcie->haslink = 1;
dev_info(&pdev->dev, "link up\n");
} else {
pcie->haslink = 0;
dev_info(&pdev->dev, "link down\n");
}
/* should we register our controller even when pcie->haslink is 0 ? */
/* register the controller with framework */
oxnas_pcie_enable(&pdev->dev, pcie);
return 0;
err_free_gpio:
if (pcie->card_reset)
gpio_free(pcie->card_reset);
return ret;
}
static const struct of_device_id oxnas_pcie_of_match_table[] = {
{ .compatible = "plxtech,nas782x-pcie", },
{},
};
MODULE_DEVICE_TABLE(of, oxnas_pcie_of_match_table);
static struct platform_driver oxnas_pcie_driver = {
.driver = {
.owner = THIS_MODULE,
.name = "oxnas-pcie",
.of_match_table =
of_match_ptr(oxnas_pcie_of_match_table),
},
};
static int __init oxnas_pcie_init(void)
{
return platform_driver_probe(&oxnas_pcie_driver,
oxnas_pcie_probe);
}
subsys_initcall(oxnas_pcie_init);
MODULE_AUTHOR("Ma Haijun <mahaijuns@gmail.com>");
MODULE_DESCRIPTION("NAS782x PCIe driver");
MODULE_LICENSE("GPLv2");
Reference in New Issue View Git Blame Copy Permalink