openwrt/package/network/config/ltq-vdsl-app/files/dsl_control
Mathias Kresin 0678cc850c ltq-xdsl-app: start after led script
During handshake we are highjack and reset a LED to the configured trigger
afterwards. ltq-xdsl-app need to start after the LED init script, to
ensure that the LED init script doesn't re-highjack the LED we are
currently using for handshake indication.

Drop the comment about the atm dependency. The dependency was fixed quite
some time ago by using hotplug scripts for br2684ctl.

Signed-off-by: Mathias Kresin <dev@kresin.me>
2018-05-17 07:40:19 +02:00

315 lines
7.0 KiB
Bash

#!/bin/sh /etc/rc.common
# Copyright (C) 2012 OpenWrt.org
START=97
USE_PROCD=1
EXTRA_COMMANDS="status lucistat"
EXTRA_HELP=" status Get DSL status information
lucistat Get status information if lua friendly format"
[ -f /lib/functions/lantiq_dsl.sh ] && . /lib/functions/lantiq_dsl.sh
#
# ITU-T G.997.1 (06/2012) - Section 7.3.1.1.1 (xTU transmission system enabling (XTSE))
# ITU-T G.997.1 Amendment 2 (04/2013) - Section 2.1 - (Vectoring mode enable (VECTORMODE_ENABLE))
#
# G.992.1 Annex A
# G.992.2 Annex A
# G.992.3 Annex A / L-US1 / L_US-2 / M
# G.992.5 Annex A / M
# G.993.2 Annex A/B/C
# G.993.5 Annex A/B/C
xtse_xdsl_a="05_01_04_00_4C_01_04_07"
# G.992.1 Annex B
# G.992.3 Annex B
# G.992.5 Annex B
# G.993.2 Annex A/B/C
# G.993.5 Annex A/B/C
xtse_xdsl_b="10_00_10_00_00_04_00_07"
# G.992.1 Annex B
# G.992.3 Annex B
# G.992.3 Annex J
# G.992.5 Annex B
# G.992.5 Annex J
# G.993.2 Annex A/B/C
# G.993.5 Annex A/B/C
xtse_xdsl_j="10_00_10_40_00_04_01_07"
# G.992.1 Annex B
xtse_xdsl_bdmt="10_00_00_00_00_00_00_00"
# G.992.3 Annex B
xtse_xdsl_b2="00_00_10_00_00_00_00_00"
# G.992.5 Annex B
xtse_xdsl_b2p="00_00_00_00_00_04_00_00"
# ANSI T1.413
xtse_xdsl_at1="01_00_00_00_00_00_00_00"
# G.992.2 Annex A
xtse_xdsl_alite="00_01_00_00_00_00_00_00"
# G.992.1 Annex A
xtse_xdsl_admt="04_00_00_00_00_00_00_00"
# G.992.3 Annex A
xtse_xdsl_a2="00_00_04_00_00_00_00_00"
# G.992.5 Annex A
xtse_xdsl_a2p="00_00_00_00_00_01_00_00"
# G.992.3 Annex L
xtse_xdsl_l="00_00_00_00_0C_00_00_00"
# G.992.3 Annex M
# G.992.5 Annex M
xtse_xdsl_m="00_00_00_00_40_00_04_00"
# G.992.3 Annex M
xtse_xdsl_m2="00_00_00_00_40_00_00_00"
# G.992.5 Annex M
xtse_xdsl_m2p="00_00_00_00_00_00_04_00"
#
# ITU-T G.994.1 (06/2012) - Table 2 (Mandatory carrier sets)
#
# A43
tone_adsl_a="0x142" # A43C + J43 + A43
tone_vdsl_a="0x142" # A43C + J43 + A43
# A43 + V43
tone_adsl_av="0x142" # A43C + J43 + A43
tone_vdsl_av="0x146" # A43C + J43 + A43 + V43
# B43
tone_adsl_b="0x81" # B43 + B43c
tone_vdsl_b="0x1" # B43
# B43 + V43
tone_adsl_bv="0x81" # B43 + B43c
tone_vdsl_bv="0x5" # B43 + V43
# create ADSL autoboot script. Used for SNR margin tweak
autoboot_script() {
echo "[WaitForConfiguration]={
locs 0 $1
}
[WaitForLinkActivate]={
}
[WaitForRestart]={
}
[Common]={
}" > /tmp/dsl.scr
}
lowlevel_cfg() {
echo "# VRX Low Level Configuration File
#
# Parameters must be separated by tabs or spaces.
# Empty lines and comments will be ignored.
#
# nFilter
#
# NA = -1
# OFF = 0
# ISDN = 1
# POTS = 2
# POTS_2 = 3
# POTS_3 = 4
#
# (dec)
-1
# nHsToneGroupMode nHsToneGroup_A nHsToneGroup_V nHsToneGroup_AV
#
# NA = -1 NA = -1 see see
# AUTO = 0 VDSL2_B43 = 0x0001 nHsToneGroup_A nHsToneGroup_A
# MANUAL = 1 VDSL2_A43 = 0x0002
# VDSL2_V43 = 0x0004
# VDSL1_V43P = 0x0008
# VDSL1_V43I = 0x0010
# ADSL1_C43 = 0x0020
# ADSL2_J43 = 0x0040
# ADSL2_B43C = 0x0080
# ADSL2_A43C = 0x0100
#
# (dec) (hex) (hex) (hex)
1 $1 $2 0x0
# nBaseAddr nIrqNum
#
# (hex) (dec)
0x1e116000 63
# nUtopiaPhyAdr nUtopiaBusWidth nPosPhyParity
# default(16b) = 0 NA = -1
# 8-bit = 1 ODD = 0
# 16-bit = 2
#
#
# (hex) (dec) (dec)
0xFF 0 0
# bNtrEnable
#
# (dec)
0" > /tmp/lowlevel.cfg
}
service_triggers() {
procd_add_reload_trigger network
}
start_service() {
local annex
local firmware
local tone
local tone_adsl
local tone_vdsl
local xtse
local xfer_mode
local line_mode
local tc_layer
local mode
local lowlevel
local snr
config_load network
config_get tone dsl tone
config_get annex dsl annex
config_get firmware dsl firmware
config_get xfer_mode dsl xfer_mode
config_get line_mode dsl line_mode
config_get snr dsl ds_snr_offset
eval "xtse=\"\${xtse_xdsl_$annex}\""
case "${xfer_mode}" in
atm)
tc_layer="-T1:0x1:0x1_1:0x1:0x1"
;;
ptm)
tc_layer="-T2:0x1:0x1_2:0x1:0x1"
;;
esac
case "${line_mode}" in
adsl)
mode="-M1"
# mask out VDSL bits when ADSL is requested
xtse="${xtse%_*}_00"
;;
vdsl)
mode="-M2"
# mask out ADSL bits when VDSL is requested
xtse="00_00_00_00_00_00_00_${xtse##*_}"
;;
esac
local annexgpio="/sys/class/gpio/annex"
if [ -d "${annexgpio}a" ] && [ -d "${annexgpio}b" ]; then
case "${annex}" in
a*|l*|m*)
echo 1 > "${annexgpio}a/value"
echo 0 > "${annexgpio}b/value"
;;
b*|j*)
echo 0 > "${annexgpio}a/value"
echo 1 > "${annexgpio}b/value"
;;
esac
fi
if [ -z "${firmware}" ]; then
# search for the firmware provided by dsl-vrx200-firmware-xdsl-*
if grep -qE "system type.*: (VR9|xRX200)" /proc/cpuinfo; then
case "${annex}" in
a*|l*|m*)
if [ -f "/lib/firmware/lantiq-vrx200-a.bin" ]; then
firmware="/lib/firmware/lantiq-vrx200-a.bin"
elif [ -f "/tmp/lantiq-vrx200-a.bin" ]; then
firmware="/tmp/lantiq-vrx200-a.bin"
elif [ -f "/lib/firmware/lantiq-vrx200-b.bin" ] && [ -f "/lib/firmware/lantiq-vrx200-b-to-a.bspatch" ]; then
bspatch /lib/firmware/lantiq-vrx200-b.bin \
/tmp/lantiq-vrx200-a.bin \
/lib/firmware/lantiq-vrx200-b-to-a.bspatch
firmware="/tmp/lantiq-vrx200-a.bin"
else
echo "firmware for annex a not found"
return 1
fi
;;
b*|j*)
if [ -f "/lib/firmware/lantiq-vrx200-b.bin" ]; then
firmware="/lib/firmware/lantiq-vrx200-b.bin"
elif [ -f "/tmp/lantiq-vrx200-b.bin" ]; then
firmware="/tmp/lantiq-vrx200-b.bin"
elif [ -f "/lib/firmware/lantiq-vrx200-a.bin" ] && [ -f "/lib/firmware/lantiq-vrx200-a-to-b.bspatch" ]; then
bspatch /lib/firmware/lantiq-vrx200-a.bin \
/tmp/lantiq-vrx200-b.bin \
/lib/firmware/lantiq-vrx200-a-to-b.bspatch
firmware="/tmp/lantiq-vrx200-b.bin"
else
echo "firmware for annex b not found"
return 1
fi
;;
*)
echo "annex type not supported use a or b"
return 1
;;
esac
fi
fi
[ -z "${firmware}" ] && firmware=/lib/firmware/vdsl.bin
[ -f "${firmware}" ] || {
echo failed to find $firmware
return 1
}
eval "tone_adsl=\"\${tone_adsl_$tone}\""
eval "tone_vdsl=\"\${tone_vdsl_$tone}\""
[ -n "${tone_adsl}" ] && [ -n "${tone_vdsl}" ] && {
lowlevel_cfg "${tone_adsl}" "${tone_vdsl}"
lowlevel="-l /tmp/lowlevel.cfg"
}
[ -z "${snr}" ] || {
# for SNR offset setting
autoboot_script "$snr"
autoboot="-a /tmp/dsl.scr -A /tmp/dsl.scr"
}
procd_open_instance
procd_set_param command /sbin/vdsl_cpe_control \
-i$xtse \
-n /sbin/dsl_notify.sh \
-f ${firmware} \
$lowlevel \
${mode} \
${tc_layer} \
$autoboot
procd_close_instance
}
stop_service() {
# do not use dsl_cmd to not block when this is locked up by some other proess
echo quit > /tmp/pipe/dsl_cpe0_cmd
DSL_NOTIFICATION_TYPE="DSL_INTERFACE_STATUS" \
DSL_INTERFACE_STATUS="DOWN" \
/sbin/dsl_notify.sh
}