mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-25 08:21:14 +00:00
f032601ed7
Adds support for GPON SFP modules based on the Realtek RTL8672 and RTL9601C chips, including but not limited to: * V-SOL V2801F * C-Data FD511GX-RM0 * OPTON GP801R * BAUDCOM BD-1234-SFM * CPGOS03-0490 v2.0 * Ubiquiti U-Fiber Instant * EXOT EGS1 Signed-off-by: Vladimir Markovets <abam_a@yahoo.com>
133 lines
3.9 KiB
Diff
133 lines
3.9 KiB
Diff
From 6c4efe83a0acf6f06c89ae17b885fa5739eb5be7 Mon Sep 17 00:00:00 2001
|
|
From: Russell King <rmk+kernel@armlinux.org.uk>
|
|
Date: Mon, 2 Dec 2019 18:20:22 +0000
|
|
Subject: [PATCH 4/4] net: sfp: re-attempt probing for phy
|
|
|
|
Some 1000BASE-T PHY modules take a while for the PHY to wake up.
|
|
Retry the probe a number of times before deciding that the module has
|
|
no PHY.
|
|
|
|
Tested with:
|
|
Sourcephotonics SPGBTXCNFC - PHY takes less than 50ms to respond.
|
|
Champion One 1000SFPT - PHY takes about 200ms to respond.
|
|
Mikrotik S-RJ01 - no PHY
|
|
|
|
Signed-off-by: Russell King <rmk+kernel@armlinux.org.uk>
|
|
---
|
|
drivers/net/phy/sfp.c | 59 ++++++++++++++++++++++++++++++++++++---------------
|
|
1 file changed, 42 insertions(+), 17 deletions(-)
|
|
|
|
--- a/drivers/net/phy/sfp.c
|
|
+++ b/drivers/net/phy/sfp.c
|
|
@@ -62,6 +62,7 @@ enum {
|
|
SFP_S_FAIL,
|
|
SFP_S_WAIT,
|
|
SFP_S_INIT,
|
|
+ SFP_S_INIT_PHY,
|
|
SFP_S_INIT_TX_FAULT,
|
|
SFP_S_WAIT_LOS,
|
|
SFP_S_LINK_UP,
|
|
@@ -126,6 +127,7 @@ static const char * const sm_state_strin
|
|
[SFP_S_FAIL] = "fail",
|
|
[SFP_S_WAIT] = "wait",
|
|
[SFP_S_INIT] = "init",
|
|
+ [SFP_S_INIT_PHY] = "init_phy",
|
|
[SFP_S_INIT_TX_FAULT] = "init_tx_fault",
|
|
[SFP_S_WAIT_LOS] = "wait_los",
|
|
[SFP_S_LINK_UP] = "link_up",
|
|
@@ -180,6 +182,12 @@ static const enum gpiod_flags gpio_flags
|
|
#define N_FAULT_INIT 5
|
|
#define N_FAULT 5
|
|
|
|
+/* T_PHY_RETRY is the time interval between attempts to probe the PHY.
|
|
+ * R_PHY_RETRY is the number of attempts.
|
|
+ */
|
|
+#define T_PHY_RETRY msecs_to_jiffies(50)
|
|
+#define R_PHY_RETRY 12
|
|
+
|
|
/* SFP module presence detection is poor: the three MOD DEF signals are
|
|
* the same length on the PCB, which means it's possible for MOD DEF 0 to
|
|
* connect before the I2C bus on MOD DEF 1/2.
|
|
@@ -236,6 +244,7 @@ struct sfp {
|
|
unsigned char sm_dev_state;
|
|
unsigned short sm_state;
|
|
unsigned char sm_fault_retries;
|
|
+ unsigned char sm_phy_retries;
|
|
|
|
struct sfp_eeprom_id id;
|
|
unsigned int module_power_mW;
|
|
@@ -1432,10 +1441,8 @@ static int sfp_sm_probe_phy(struct sfp *
|
|
int err;
|
|
|
|
phy = get_phy_device(sfp->i2c_mii, SFP_PHY_ADDR, is_c45);
|
|
- if (phy == ERR_PTR(-ENODEV)) {
|
|
- dev_info(sfp->dev, "no PHY detected\n");
|
|
- return 0;
|
|
- }
|
|
+ if (phy == ERR_PTR(-ENODEV))
|
|
+ return PTR_ERR(phy);
|
|
if (IS_ERR(phy)) {
|
|
dev_err(sfp->dev, "mdiobus scan returned %ld\n", PTR_ERR(phy));
|
|
return PTR_ERR(phy);
|
|
@@ -1954,6 +1961,7 @@ static void sfp_sm_module(struct sfp *sf
|
|
static void sfp_sm_main(struct sfp *sfp, unsigned int event)
|
|
{
|
|
unsigned long timeout;
|
|
+ int ret;
|
|
|
|
/* Some events are global */
|
|
if (sfp->sm_state != SFP_S_DOWN &&
|
|
@@ -2027,22 +2035,39 @@ static void sfp_sm_main(struct sfp *sfp,
|
|
sfp_sm_fault(sfp, SFP_S_INIT_TX_FAULT,
|
|
sfp->sm_fault_retries == N_FAULT_INIT);
|
|
} else if (event == SFP_E_TIMEOUT || event == SFP_E_TX_CLEAR) {
|
|
- init_done: /* TX_FAULT deasserted or we timed out with TX_FAULT
|
|
- * clear. Probe for the PHY and check the LOS state.
|
|
- */
|
|
- if (sfp_sm_probe_for_phy(sfp)) {
|
|
- sfp_sm_next(sfp, SFP_S_FAIL, 0);
|
|
- break;
|
|
- }
|
|
- if (sfp_module_start(sfp->sfp_bus)) {
|
|
- sfp_sm_next(sfp, SFP_S_FAIL, 0);
|
|
+ init_done:
|
|
+ sfp->sm_phy_retries = R_PHY_RETRY;
|
|
+ goto phy_probe;
|
|
+ }
|
|
+ break;
|
|
+
|
|
+ case SFP_S_INIT_PHY:
|
|
+ if (event != SFP_E_TIMEOUT)
|
|
+ break;
|
|
+ phy_probe:
|
|
+ /* TX_FAULT deasserted or we timed out with TX_FAULT
|
|
+ * clear. Probe for the PHY and check the LOS state.
|
|
+ */
|
|
+ ret = sfp_sm_probe_for_phy(sfp);
|
|
+ if (ret == -ENODEV) {
|
|
+ if (--sfp->sm_phy_retries) {
|
|
+ sfp_sm_next(sfp, SFP_S_INIT_PHY, T_PHY_RETRY);
|
|
break;
|
|
+ } else {
|
|
+ dev_info(sfp->dev, "no PHY detected\n");
|
|
}
|
|
- sfp_sm_link_check_los(sfp);
|
|
-
|
|
- /* Reset the fault retry count */
|
|
- sfp->sm_fault_retries = N_FAULT;
|
|
+ } else if (ret) {
|
|
+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
|
|
+ break;
|
|
}
|
|
+ if (sfp_module_start(sfp->sfp_bus)) {
|
|
+ sfp_sm_next(sfp, SFP_S_FAIL, 0);
|
|
+ break;
|
|
+ }
|
|
+ sfp_sm_link_check_los(sfp);
|
|
+
|
|
+ /* Reset the fault retry count */
|
|
+ sfp->sm_fault_retries = N_FAULT;
|
|
break;
|
|
|
|
case SFP_S_INIT_TX_FAULT:
|