mirror of
https://github.com/openwrt/openwrt.git
synced 2024-12-22 15:02:32 +00:00
8619d7af67
Dual-slot NAS based on Marvell Kirkwood.
Specifications:
- Marvell 88F6702 @1GHz
- 256Mb RAM
- 128Mb NAND
- 1x GbE LAN (Marvell 88E1318R)
- 1x USB 2.0
- 2x SATA
- Weltrend WT69P3 ("supervisor" MCU chip)
- Serial on J2 (115200,8n1)
- Newer bootROM so kwboot-ing via serial is possible
Notes:
- The Weltrend MCU is controlled by the package added in utils/dns320l-mcu.
- The original MAC address is stored in the "mini firmware" image's first
17 bytes.
- Compared to the original MTD layout, the uImage+rootfs are now stored in
a common ubi partition.
Installation:
1. Serial console
- Connect your levelshifter to the serial console
on J2 (refer to the wiki page for pinout)
2. Update u-boot
- Download the u-boot.kwb image for the device
- Powercycle the NAS
- Run "kwboot -b u-boot-dns320l/u-boot.kwb /dev/ttyUSB0 -p"
- Connect to the serial console with minicom
- tftp 0x0800000 u-boot-dns320l/u-boot.kwb
(Please note that "PHY reset timed out" seems to be customary
on kirkwood devices, the egiga0 interface works regardless.)
- nand erase 0x0 100000
- nand write 0x0800000 0x0 0x100000
- reset
3. Install OpenWrt
- Boot up the initramfs image
- tftpboot 0x800000 openwrt-kirkwood-generic-dlink_dns320l-initramfs-uImage; bootm 0x800000
- Download the sysupgrade image and perform sysupgrade
Signed-off-by: Zoltan HERPAI <wigyori@uid0.hu>
Reviewed-by: Pawel Dembicki <paweldembicki@gmail.com>
36 lines
913 B
Diff
36 lines
913 B
Diff
--- a/arch/arm/boot/dts/marvell/Makefile
|
|
+++ b/arch/arm/boot/dts/marvell/Makefile
|
|
@@ -92,6 +92,7 @@ dtb-$(CONFIG_MACH_KIRKWOOD) += \
|
|
kirkwood-db-88f6282.dtb \
|
|
kirkwood-dir665.dtb \
|
|
kirkwood-dns320.dtb \
|
|
+ kirkwood-dns320l.dtb \
|
|
kirkwood-dns325.dtb \
|
|
kirkwood-dockstar.dtb \
|
|
kirkwood-dreamplug.dtb \
|
|
--- a/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
|
|
+++ b/arch/arm/boot/dts/marvell/kirkwood-dns320l.dts
|
|
@@ -32,6 +32,13 @@
|
|
reg = <0x00000000 0x10000000>;
|
|
};
|
|
|
|
+ aliases {
|
|
+ led-boot = &led_orange_usb;
|
|
+ led-failsafe = &led_orange_usb;
|
|
+ led-running = &led_orange_usb;
|
|
+ led-upgrade = &led_orange_usb;
|
|
+ };
|
|
+
|
|
chosen {
|
|
bootargs = "console=ttyS0,115200n8 earlyprintk";
|
|
stdout-path = &uart0;
|
|
@@ -68,7 +75,7 @@
|
|
linux,default-trigger = "usbport";
|
|
};
|
|
|
|
- orange-usb {
|
|
+ led_orange_usb: orange-usb {
|
|
label = "dns320l:usb:orange";
|
|
gpios = <&gpio0 26 GPIO_ACTIVE_HIGH>;
|
|
};
|