openwrt/target/linux/lantiq/dts/WBMR.dts

/dts-v1/;

/include/ "ar9.dtsi"

/ {
	model = "WBMR - Buffalo WBMR-HP-G300H";

	chosen {
		bootargs = "console=ttyLTQ0,115200 init=/etc/preinit";
	};

	memory@0 {
		reg = <0x0 0x4000000>;
	};

	fpi@10000000 {
		localbus@0 {
			nor-boot@0 {
				compatible = "lantiq,nor";
				bank-width = <2>;
				reg = <0 0x0 0x2000000>;
				#address-cells = <1>;
				#size-cells = <1>;

				partition@0 {
					label = "uboot";
					reg = <0x00000 0x40000>;
					read-only;
				};

				partition@40000 {
					label = "uboot_env";
					reg = <0x40000 0x20000>;
					read-only;
				};

				partition@20000 {
					label = "firmware";
					reg = <0x60000 0x1f20000>;
				};

				partition@0x1fc0000 {
					label = "board";
					reg = <0x1fc0000 0x20000>;
					read-only;
				};

				partition@0x1fe0000 {
					label = "calibration";
					reg = <0x1fe0000 0x20000>;
					read-only;
				};
			};

			mac_addr {
				compatible = "lantiq,eth-mac";
				reg = <0 0x1fd0024 0x6>;
			};
		};

		gpio: pinmux@E100B10 {
			pinctrl-names = "default";
			pinctrl-0 = <&state_default>;

			state_default: pinmux {
				pci-in {
					lantiq,groups = "req1";
					lantiq,output = <0>;
					lantiq,open-drain = <1>;
					lantiq,pull = <2>;
				};
				pci-out {
					lantiq,groups = "gnt1";
					lantiq,output = <1>;
					lantiq,pull = <0>;
				};
				pci_rst {
					lantiq,pins = "io21";
					lantiq,pull = <0>;
					lantiq,output = <1>;
				};
			};
		};

		etop@E180000 {
			phy-mode = "rgmii";
		};

		ifxhcd@E101000 {
			status = "okay";
			gpios = <&gpio 36 0>;
		};

		pci@E105400 {
			status = "okay";
		};
	};

	gpio-keys-polled {
		compatible = "gpio-keys-polled";
		#address-cells = <1>;
		#size-cells = <0>;
		poll-interval = <100>;

		wps {
			label = "wps";
			gpios = <&gpio 0 1>;
			linux,code = <0x211>;
		};
		reset {
			label = "reset";
			gpios = <&gpio 37 1>;
			linux,code = <0x198>;
		};
		eject {
			label = "eject";
			gpios = <&gpio 34 1>;
			linux,code = <0xf7>;
		};
		movie {
			label = "movie";
			gpios = <&gpio 22 1>;
			linux,code = <0x109>;
		};
	};

	gpio-leds {
		compatible = "gpio-leds";

		power {
			label = "power";
			gpios = <&gpio 1 1>;
		};
		power2 {
			label = "power2";
			gpios = <&gpio 5 1>;
		};
		security {
			label = "security";
			gpios = <&gpio 14 1>;
		};
		wifi {
			label = "wifi";
			gpios = <&gpio 15 1>;
		};
		dsl {
			label = "dsl";
			gpios = <&gpio 16 1>;
		};
		online {
			label = "online";
			gpios = <&gpio 17 1>;
		};
		online2 {
			label = "online2";
			gpios = <&gpio 18 1>;
		};
		movie {
			label = "movie";
			gpios = <&gpio 20 1>;
		};
		usb {
			label = "usb";
			gpios = <&gpio 28 1>;
			default-state = "on";
		};
	};
};