openwrt/target/linux/ramips/dts/mt7621_gnubee_gb-pc2.dts

#include "mt7621.dtsi"

#include <dt-bindings/gpio/gpio.h>
#include <dt-bindings/input/input.h>

/ {
	compatible = "gnubee,gb-pc2", "mediatek,mt7621-soc";
	model = "GB-PC2";

	aliases {
		led-boot = &led_system;
		led-failsafe = &led_system;
		led-running = &led_system;
		led-upgrade = &led_system;
	};

	keys {
		compatible = "gpio-keys";

		reset {
			label = "reset";
			gpios = <&gpio 18 GPIO_ACTIVE_HIGH>;
			linux,code = <KEY_RESTART>;
		};
	};

	leds {
		compatible = "gpio-leds";

		ethblack-green {
			label = "green:ethblack";
			gpios = <&gpio 3 GPIO_ACTIVE_LOW>;
		};

		ethblue-green {
			label = "green:ethblue";
			gpios = <&gpio 4 GPIO_ACTIVE_LOW>;
		};

		ethyellow-green {
			label = "green:ethyellow";
			gpios = <&gpio 15 GPIO_ACTIVE_LOW>;
		};

		ethyellow-orange {
			label = "orange:ethyellow";
			gpios = <&gpio 13 GPIO_ACTIVE_LOW>;
		};

		power {
			label = "green:power";
			gpios = <&gpio 6 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "default-on";
		};

		led_system: system {
			label = "green:system";
			gpios = <&gpio 8 GPIO_ACTIVE_LOW>;
			linux,default-trigger = "disk-activity";
		};
	};
};

&sdhci {
	status = "okay";
};

&spi0 {
	status = "okay";

	flash@0 {
		compatible = "jedec,spi-nor";
		reg = <0>;
		spi-max-frequency = <50000000>;
		broken-flash-reset;

		partitions {
			compatible = "fixed-partitions";
			#address-cells = <1>;
			#size-cells = <1>;

			partition@0 {
				label = "u-boot";
				reg = <0x0 0x30000>;
				read-only;
			};

			partition@30000 {
				label = "u-boot-env";
				reg = <0x30000 0x10000>;
				read-only;
			};

			factory: partition@40000 {
				label = "factory";
				reg = <0x40000 0x10000>;
				read-only;
			};

			partition@50000 {
				compatible = "denx,uimage";
				label = "firmware";
				reg = <0x50000 0x1fb0000>;
			};
		};
	};
};

&pcie {
	status = "okay";
};

&gmac0 {
	nvmem-cells = <&macaddr_factory_e000>;
	nvmem-cell-names = "mac-address";
};

&gmac1 {
	status = "okay";
	label = "ethyellow";
	phy-mode = "rgmii-rxid";
	phy-handle = <&ethphy5>;

	nvmem-cells = <&macaddr_factory_e000>;
	nvmem-cell-names = "mac-address";
};

&mdio {
	ethphy5: ethernet-phy@5 {
		reg = <5>;
	};
};

&switch0 {
	ports {
		port@0 {
			status = "okay";
			label = "ethblack";
		};

		port@4 {
			status = "okay";
			label = "ethblue";
		};
	};
};

&state_default {
	gpio {
		groups = "jtag", "uart3", "wdt";
		function = "gpio";
	};
};

&factory {
	compatible = "nvmem-cells";
	#address-cells = <1>;
	#size-cells = <1>;

	macaddr_factory_e000: macaddr@e000 {
		reg = <0xe000 0x6>;
	};
};