f12bad6c19
The libraries libpthread, libdl, libutil, libanl have been integrated into the libc library in version 2.34. it is not needed to explicitly link them any more. Most of the functions have been moved from the librt.so into libc.so some time ago already. Signed-off-by: Hauke Mehrtens <hauke@hauke-m.de> |
||
|---|---|---|
| .. | ||
| files | ||
| patches | ||
| src | ||
| Config.in | ||
| Makefile | ||
| README.md | ||
UBUS methods - hostapd
bss_mgmt_enable
Enable 802.11k/v features.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| neighbor_report | bool | no | enable 802.11k neighbor reports |
| beacon_report | bool | no | enable 802.11k beacon reports |
| link_measurements | bool | no | enable 802.11k link measurements |
| bss_transition | bool | no | enable 802.11v BSS transition support |
example
ubus call hostapd.wl5-fb bss_mgmt_enable '{ "neighbor_report": true, "beacon_report": true, "link_measurements": true, "bss_transition": true }'
bss_transition_request
Initiate an 802.11v transition request.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| addr | string | yes | client MAC address |
| disassociation_imminent | bool | no | set Disassociation Imminent bit |
| disassociation_timer | int32 | no | disassociate client if it doesn't roam after this time |
| validity_period | int32 | no | validity of the BSS Transition Candiate List |
| neighbors | array | no | BSS Transition Candidate List |
| abridged | bool | no | prefer APs in the BSS Transition Candidate List |
| dialog_token | int32 | no | identifier for the request/report transaction |
| mbo_reason | int32 | no | MBO Transition Reason Code Attribute |
| cell_pref | int32 | no | MBO Cellular Data Connection Preference Attribute |
| reassoc_delay | int32 | no | MBO Re-association retry delay |
example
ubus call hostapd.wl5-fb bss_transition_request '{ "addr": "68:2F:67:8B:98:ED", "disassociation_imminent": false, "disassociation_timer": 0, "validity_period": 30, "neighbors": ["b6a7b9cbeebabf5900008064090603026a00"], "abridged": 1 }'
config_add
Dynamically load a BSS configuration from a file. This is used by netifd's mac80211 support script to configure BSSes on multiple PHYs in a single hostapd instance.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| iface | string | yes | WiFi interface name |
| config | string | yes | path to hostapd config file |
config_remove
Dynamically remove a BSS configuration.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| iface | string | yes | WiFi interface name |
del_client
Kick a client off the network.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| addr | string | yes | client MAC address |
| reason | int32 | no | 802.11 reason code |
| deauth | bool | no | deauthenticates client instead of disassociating |
| ban_time | int32 | no | ban client for N milliseconds |
example
ubus call hostapd.wl5-fb del_client '{ "addr": "68:2f:67:8b:98:ed", "reason": 5, "deauth": true, "ban_time": 10000 }'
get_clients
Show associated clients.
example
ubus call hostapd.wl5-fb get_clients
output
{
"freq": 5260,
"clients": {
"68:2f:67:8b:98:ed": {
"auth": true,
"assoc": true,
"authorized": true,
"preauth": false,
"wds": false,
"wmm": true,
"ht": true,
"vht": true,
"he": false,
"wps": false,
"mfp": true,
"rrm": [
0,
0,
0,
0,
0
],
"extended_capabilities": [
0,
0,
0,
0,
0,
0,
0,
64
],
"aid": 3,
"signature": "wifi4|probe:0,1,45,127,107,191,221(0017f2,10),221(001018,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,extcap:0000008000000040|assoc:0,1,33,36,48,45,127,191,221(0017f2,10),221(001018,2),221(0050f2,2),htcap:006f,htagg:1b,htmcs:0000ffff,vhtcap:0f825832,vhtrxmcs:0000ffea,vhttxmcs:0000ffea,txpow:14f9,extcap:0000000000000040",
"bytes": {
"rx": 1933667,
"tx": 746805
},
"airtime": {
"rx": 208863,
"tx": 9037883
},
"packets": {
"rx": 3587,
"tx": 2185
},
"rate": {
"rx": 866700,
"tx": 866700
},
"signal": -50,
"capabilities": {
"vht": {
"su_beamformee": true,
"mu_beamformee": false,
"mcs_map": {
"rx": {
"1ss": 9,
"2ss": 9,
"3ss": 9,
"4ss": -1,
"5ss": -1,
"6ss": -1,
"7ss": -1,
"8ss": -1
},
"tx": {
"1ss": 9,
"2ss": 9,
"3ss": 9,
"4ss": -1,
"5ss": -1,
"6ss": -1,
"7ss": -1,
"8ss": -1
}
}
}
}
}
}
}
get_features
Show HT/VHT support.
example
ubus call hostapd.wl5-fb get_features
output
{
"ht_supported": true,
"vht_supported": true
}
get_status
Get BSS status.
example
ubus call hostapd.wl5-fb get_status
output
{
"status": "ENABLED",
"bssid": "b6:a7:b9:cb:ee:bc",
"ssid": "fb",
"freq": 5260,
"channel": 52,
"op_class": 128,
"beacon_interval": 100,
"phy": "wl5-lan",
"rrm": {
"neighbor_report_tx": 0
},
"wnm": {
"bss_transition_query_rx": 0,
"bss_transition_request_tx": 0,
"bss_transition_response_rx": 0
},
"airtime": {
"time": 259561738,
"time_busy": 2844249,
"utilization": 0
},
"dfs": {
"cac_seconds": 60,
"cac_active": false,
"cac_seconds_left": 0
}
}
link_measurement_req
Initiate an 802.11k Link Measurement Request.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| addr | string | yes | client MAC address |
| tx-power-used | int32 | no | transmit power used to transmit the Link Measurement Request frame |
| tx-power-max | int32 | no | upper limit of transmit power to be used by the client |
list_bans
List banned clients.
example
ubus call hostapd.wl5-fb list_bans
output
{
"clients": [
"68:2f:67:8b:98:ed"
]
}
notify_response
When enabled, hostapd will send a ubus notification and wait for a response before responding to various requests. This is used by e.g. usteer to make it possible to ignore probe requests.
⚠️ enabling this will cause hostapd to stop responding to probe requests unless a ubus subscriber responds to the ubus notifications.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| notify_response | int32 | yes | disable (0) or enable (!0) |
example
ubus call hostapd.wl5-fb notify_response '{ "notify_response": 1 }'
reload
Reload BSS configuration.
⚠️ this can cause problems for certain configurations:
Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
Mon May 16 16:09:08 2022 daemon.warn hostapd: Failed to check if DFS is required; ret=-1
Mon May 16 16:09:08 2022 daemon.err hostapd: Wrong coupling between HT and VHT/HE channel setting
example
ubus call hostapd.wl5-fb reload
rrm_beacon_req
Send a Beacon Measurement Request to a client.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| addr | string | yes | client MAC address |
| op_class | int32 | yes | the Regulatory Class for which this Measurement Request applies |
| channel | int32 | yes | channel to measure |
| duration | int32 | yes | compile Beacon Measurement Report after N TU |
| mode | int32 | yes | mode to be used for measurement (0: passive, 1: active, 2: beacon table) |
| bssid | string | no | filter BSSes in Beacon Measurement Report by BSSID |
| ssid | string | no | filter BSSes in Beacon Measurement Report by SSID |
rrm_nr_get_own
Show Neighbor Report Element for this BSS.
example
ubus call hostapd.wl5-fb rrm_nr_get_own
output
{
"value": [
"b6:a7:b9:cb:ee:bc",
"fb",
"b6a7b9cbeebcaf5900008095090603029b00"
]
}
rrm_nr_list
Show Neighbor Report Elements for other BSSes in this ESS.
example
ubus call hostapd.wl5-fb rrm_nr_list
output
{
"list": [
[
"b6:a7:b9:cb:ee:ba",
"fb",
"b6a7b9cbeebabf5900008064090603026a00"
]
]
}
rrm_nr_set
Set the Neighbor Report Elements. An element for the node on which this command is executed will always be added.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| list | array | yes | array of Neighbor Report Elements in the format of the rrm_nr_list output |
example
ubus call hostapd.wl5-fb rrm_nr_set '{ "list": [ [ "b6:a7:b9:cb:ee:ba", "fb", "b6a7b9cbeebabf5900008064090603026a00" ] ] }'
set_vendor_elements
Configure Vendor-specific Information Elements for BSS.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| vendor_elements | string | yes | Vendor-specific Information Elements as hex string |
example
ubus call hostapd.wl5-fb set_vendor_elements '{ "vendor_elements": "dd054857dd6662" }'
switch_chan
Initiate a channel switch.
⚠️ trying to switch to the channel that is currently in use will fail: Command failed: Operation not supported
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| freq | int32 | yes | frequency in MHz to switch to |
| bcn_count | int32 | no | count in Beacon frames (TBTT) to perform the switch |
| center_freq1 | int32 | no | segment 0 center frequency in MHz (valid for HT and VHT) |
| center_freq2 | int32 | no | segment 1 center frequency in MHz (valid only for 80 MHz channel width and an 80+80 channel) |
| bandwidth | int32 | no | channel width to use |
| sec_channel_offset | int32 | no | secondary channel offset for HT40 (0 = disabled, 1 = HT40+, -1 = HT40-) |
| ht | bool | no | enable 802.11n |
| vht | bool | no | enable 802.11ac |
| he | bool | no | enable 802.11ax |
| block_tx | bool | no | block transmission during CSA period |
| csa_force | bool | no | restart the interface in case the CSA fails |
example
ubus call hostapd.wl5-fb switch_chan '{ "freq": 5180, "bcn_count": 10, "center_freq1": 5210, "bandwidth": 80, "he": 1, "block_tx": 1, "csa_force": 0 }'
update_airtime
Set dynamic airtime weight for client.
arguments
| Name | Type | Required | Description |
|---|---|---|---|
| sta | string | yes | client MAC address |
| weight | int32 | yes | airtime weight |
update_beacon
Force beacon frame content to be updated and to start beaconing on an interface that uses start_disabled=1.
example
ubus call hostapd.wl5-fb update_beacon
wps_status
Get WPS status for BSS.
example
ubus call hostapd.wl5-fb wps_status
output
{
"pbc_status": "Disabled",
"last_wps_result": "None"
}
wps_cancel
Cancel WPS Push Button Configuration.
example
ubus call hostapd.wl5-fb wps_cancel
wps_start
Start WPS Push Button Configuration.
example
ubus call hostapd.wl5-fb wps_start