openwrt/target/linux
INAGAKI Hiroshi 0444a93bdf ramips: add support for ELECOM WRC-1750GST2
ELECOM WRC-1750GST2 is a 2.4/5 GHz band 11ac (Wi-Fi 5) router, based on
MT7621A.

Specification:

- SoC		: MediaTek MT7621A
- RAM		: DDR3 256 MiB (NT5CC128M16JR-EK)
- Flash		: SPI-NOR 32 MiB (MX25L25645GMI-08G)
- WLAN		: 2.4/5 GHz 3T3R (2x MediaTek MT7615)
- Ethernet	: 10/100/1000 Mbps x5
  - Switch	: MediaTek MT7530 (SoC)
- LEDs/Keys	: 4x/6x (2x buttons, 1x slide-switch)
- UART		: through-hole on PCB
  - J4: 3.3V, GND, TX, RX, from ethernet port side
  - 57600n8
- Power		: 12 VDC, 1.5 A

Flash instruction using factory image:

1. Boot WRC-1750GST2 normally with "Router" mode
2. Access to "http://192.168.2.1/" and open firmware update page
   ("ファームウェア更新")
3. Select the OpenWrt factory image and click apply ("適用") button
4. Wait ~120 seconds to complete flashing

MAC addresses:

LAN	: 04:AB:18:xx:xx:23 (Factory, 0xE000 (hex))
WAN	: 04:AB:18:xx:xx:24 (Factory, 0xE006 (hex))
2.4GHz	: 04:AB:18:xx:xx:25 (Factory, 0x4    (hex))
5GHz	: 04:AB:18:xx:xx:26 (Factory, 0x8004 (hex))

Signed-off-by: INAGAKI Hiroshi <musashino.open@gmail.com>
(cherry picked from commit b3ca1f30ef)
2021-03-22 21:07:34 +01:00
..
apm821xx kernel: bump 5.4 to 5.4.97 2021-02-11 16:08:28 +01:00
arc770 target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
archs38 archs38: Add CONFIG_HZ=100 2021-03-19 18:01:55 +01:00
armvirt target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
at91 at91: use SPDX license identifiers on DTS files 2021-02-10 15:47:23 +01:00
ath25 target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
ath79 ath79: fix lan port display order for sitecom wlr-7100 2021-03-22 21:06:40 +01:00
bcm27xx bcm27xx: bcm2711: correctly disable HW_RANDOM_BCM2835 2021-03-22 08:09:13 +01:00
bcm47xx bcm47xx: make WGT634U NVRAM patch apply again 2021-03-17 23:38:46 +01:00
bcm53xx bcm53xx: backport first 5.13 DTS changes 2021-03-17 23:38:46 +01:00
bcm63xx bcm63xx: AD1018-nor: add NAND flash 2021-03-08 12:46:46 +01:00
bcm4908 bcm4908: backport recent bcm_sf2 changes 2021-03-17 21:24:24 +01:00
gemini target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
generic kernel: backport Broadcom NVRAM driver cleanups 2021-03-17 23:38:46 +01:00
imx6 Revert "imx6: bootscript-apalis: make it working on v2021.01 release" 2021-02-14 23:28:07 +01:00
ipq40xx kernel: bump 5.4 to 5.4.102 2021-03-06 15:51:54 +01:00
ipq806x kernel: add the latest mtd patch extending ofpart parser 2021-03-17 21:23:38 +01:00
kirkwood kernel: add pending mtd patches adding NVMEM support 2021-03-17 21:24:22 +01:00
lantiq kernel: add pending mtd patches adding NVMEM support 2021-03-17 21:24:22 +01:00
layerscape kernel: bump 5.4 to 5.4.102 2021-03-06 15:51:54 +01:00
malta target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
mediatek kernel: bump 5.4 to 5.4.102 2021-03-06 15:51:54 +01:00
mpc85xx mpc85xx: p2020: fix cfi-nor detection 2021-03-01 21:49:55 +01:00
mvebu mvebu: add LED support for GL.iNet GL-MV1000 2021-03-22 21:05:41 +01:00
mxs target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
octeon octeon: re-enable CONFIG_CAVIUM_CN63XXP1 and EdgeRouter image 2021-02-28 21:56:39 +01:00
octeontx kernel: bump 5.4 to 5.4.105 2021-03-16 00:31:16 +01:00
omap target: use SPDX license identifiers on scripts 2021-02-10 15:47:23 +01:00
oxnas target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
pistachio kernel: add pending mtd patches adding NVMEM support 2021-03-17 21:24:22 +01:00
ramips ramips: add support for ELECOM WRC-1750GST2 2021-03-22 21:07:34 +01:00
realtek kernel: bump 5.4 to 5.4.102 2021-03-06 15:51:54 +01:00
rockchip target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
sunxi kernel: bump 5.4 to 5.4.102 2021-03-06 15:51:54 +01:00
tegra target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
uml target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
x86 kernel: bump 5.4 to 5.4.105 2021-03-16 00:31:16 +01:00
zynq target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00
Makefile target: use SPDX license identifiers on Makefiles 2021-02-10 15:47:18 +01:00