Daniel Danzberger 029c970464 ramips: mt7621: Add new device AsiaRF AP7621-001 ... Hardware specs: SoC: Mediatek MT7621A CPU: 4x 880Mhz Cache: 32 KB I-Cache and 32 KB D-Cach 256 KB L2 Cache (shared by Dual-Core) RAM: DDR3 512MB 16bits BUS FLASH: 16MB Switch: Mediatek Gigabit Switch (1 x LAN, 1 x WAN) USB: 1x 3.0 PCI: 3x Mini PCIe GPS: Quectel L70B BTN: Reset LED: - Power - Ethernet - Wifi - USB UART: UART is present as Pads with throughholes on the PCB. They are located on left side. 3.3V - RX - GND - TX / 57600-8N1 3.3V is the square pad Installation: The stock image is a modified openwrt and can be overflashed via # sysupgrade -F image.bin Signed-off-by: Daniel Danzberger <daniel@dd-wrt.com> Signed-off-by: Christian Lamparter <chunkeey@gmail.com> [removed unused label, formatting]		2019-06-25 15:02:21 +02:00
..
board.d	ramips: mt7621: Add new device AsiaRF AP7621-001	2019-06-25 15:02:21 +02:00
hotplug.d	ramips: add support for DLINK DIR-510L	2019-03-24 01:44:24 +01:00
init.d	ramips: move wifi related interrupts off the main core on SMP systems	2019-01-29 11:27:02 +01:00
uci-defaults	ramips: use generic board detection for D-Link DAP-1522 A1	2018-02-20 19:25:17 +01:00
inittab	image / basefiles: make console password configurable	2016-04-18 21:53:07 +02:00